• Fitting Position: Front Axle Left, Front Axle Right, Front
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Fabrication Number: ZTP-VW-001A
• Manufacturer: NTY

Fitting Position: Front Axle, inner, in front of axle, Left, Right, Lower

• Inner Diameter [mm]: 12
• Fitting Position: both sides, Front, Front Axle
• Outer Diameter [mm]: 40
• Weight [kg]: 0.153
• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Name: TG 00727632
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Lower, Lower Front Axle
• for OE number: 1K0 407 182
• Manufacturer: GSP AUTOMOTIVE

• Fitting Position: Front Axle, Front
• Total Length [mm]: 54
• Outer Diameter [mm]: 48
• Inner Diameter [mm]: 12
• Name: COC 80005079
• Manufacturer: CORTECO

• Fitting Position: Front Axle
• Quality: OE Performance
• Colour: silver
• Weight [g]: 180
• Manufacturer: GATES

• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Left, Right, Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Control/Trailing Arm Type: for control arm
• Weight [g]: 242
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Overall Length [mm]: 54
• Name: IM 1620
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Lower, Front, Front Axle Left, Front Axle Right
• Outer Diameter 1 [mm]: 28
• Outer Diameter 2 [mm]: 40
• Inner Diameter 1 [mm]: 12
• Thickness [mm]: 54
• Manufacturer: BGA

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Height [mm]: 54
• Name: ALT 81191AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, inner, in front of axle, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 53
• Manufacturer: DELPHI
• Name: DE TD521W

• Production date from: 01/17
• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• for OE number: 5Q0407182A
• Manufacturer: SASIC
• Additional information: 9001759
• Lisainfo: 9001759

• Fitting Position: Front, Lower Front Axle
• Fabrication Number: ZTP-HD-025D
• Mounting Type: Rubber-Metal Mount
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right, Lower, Front
• Width [mm]: 40
• Height [mm]: 54
• Inner Diameter [mm]: 12
• Manufacturer: FAST

• Fitting Position: Rear Axle, Lower, outer
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 50
• Name: ALT 94739AL
• Manufacturer: ALTE AUTOMOTIVE

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.183
• Observe service information:
• Manufacturer: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331003
• Manufacturer: SKF
• Name: SK VKDS331003

• Quantity per packing unit: 2
• Fitting Position: Front, Front Axle both sides
• Thickness [mm]: 54
• Weight [kg]: 0.187
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 28, 48
• Mounting Type: Rubber-Metal Mount
• Manufacturer: METALCAUCHO

• for OE number: 5Q0407182
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Name: DA DSS1079
• Manufacturer: DAYCO

• Fitting Position: Rear Axle, Rear, Upper
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38.6
• for OE number: Part of 5Q0505323D
• paired article number: 2256142
• Manufacturer: SASIC

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.187
• Observe service information:
• Name: SW 30 92 4390
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829010610

• Fitting Position: outer, Rear Axle
• Required quantity: 2
• Weight [g]: 131
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Length [mm]: 50
• Name: IM 1724
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right, Front, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 39
• Inner Diameter [mm]: 12
• Width [mm]: 32
• Quantity per axle: 2
• for OE number: 5Q0 407 182
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Lower
• General Information: Bush for wishbone arm; small
• Manufacturer: BORSEHUNG

• Model Year from: 2017
• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.205
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Packaging length [cm]: 5.4
• Packaging width [cm]: 4.8
• Packaging height [cm]: 4.8
• Manufacturer: FEBEST

• Production date from: 08/02/21
• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• for OE number: 5Q0407183K
• Manufacturer: SASIC

• Fitting Position: Rear Axle, Upper, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 45
• Name: ALT 88666AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• for OE number: 5Q0505541A
• Manufacturer: SASIC

• Fitting Position: Rear Axle, Front, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38.6
• for OE number: Part of 5Q0505323D
• paired article number: 2256143
• Manufacturer: SASIC

• Fitting Position: Rear Axle, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Height [mm]: 64
• Name: ALT 91581AL
• Manufacturer: ALTE AUTOMOTIVE

• Production date from: 08.02.2021
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Base body material: Steel
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 13
• Width [mm]: 50
• Quantity per axle: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: LEMFORDER
• Name: LMI 3772001

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear, Left, Right, Front Axle
• Weight [g]: 351
• Outer Diameter 2 [mm]: 65
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 30
• Length [mm]: 50
• Name: IM 1308
• Manufacturer: ORIGINAL IMPERIUM

• Weight [kg]: 0.074
• Fitting Position: Rear Axle both sides, Upper, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 38.1
• Length [mm]: 45
• Manufacturer: RTS

• Weight [kg]: 0.13
• Fitting Position: Rear Axle both sides, Upper, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Length [mm]: 45
• Manufacturer: RTS

• Construction Year to: 08.2018
• Fitting Position: Front Axle, inner, Front, Lower
• Height 1 [mm]: 54
• Height 2 [mm]: 33
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Manufacturer: KAVO

• Fitting Position: Rear Axle, Lower, Front
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 60.2
• Width 1 [mm]: 45
• Width 2 [mm]: 64
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEYLE

• Fitting Position: Rear Axle both sides, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 37.4
• Inner Diameter [mm]: 12.1
• Length [mm]: 49.8
• Weight [kg]: 0.132
• Manufacturer: RTS

• Fitting Position: Front
• General Information: Bush for wishbone arm; front
• Manufacturer: VIKA

• Weight [kg]: 0.342
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Fitting Position: Front Axle
• General Information: Bush for wishbone arm
• Manufacturer: BORSEHUNG

• Weight [kg]: 0.18
• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Diameter 1 [mm]: 12.1
• Diameter 2 [mm]: 60.3
• Length [mm]: 63.8
• Manufacturer: RTS

• Fitting Position: Rear Axle both sides, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12.2
• Length [mm]: 60
• Weight [kg]: 0.087
• Manufacturer: RTS

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• Height [mm]: 50
• Name: ALT 88894AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 47.5
• Inner Diameter [mm]: 12.2
• Length [mm]: 60
• Weight [kg]: 0.102
• Manufacturer: RTS

• Fitting Position: inner, Front, in front of axle
• Control/Trailing Arm Type: Control Arm
• Required quantity: 2
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.2
• Packaging length [cm]: 14.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5
• Manufacturer: MONROE

• Weight [kg]: 0.26
• Fitting Position: Front Axle both sides, Lower, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 64.7
• Length [mm]: 50
• Manufacturer: RTS

• Suspension: for vehicles with Steel Wheel Arch Trims
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 64.8
• Length [mm]: 50
• paired article number: 271402
• Weight [kg]: 0.34
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower

• Fitting Position: Front Axle, inner, behind the axle, Lower
• Inner Diameter 1 [mm]: 13
• Outer Diameter 1 [mm]: 65
• Thickness 1 [mm]: 28
• Inner Diameter 2 [mm]: 13
• Outer Diameter 2 [mm]: 65
• Thickness 2 [mm]: 50
• Manufacturer: DELPHI ZAWIESZENIE

• Fitting Position: Rear, Lower, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331080
• Height [mm]: 51.5
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• Name: SK VKDS331080
• Manufacturer: SKF

• Construction Year to: 11.2016
• Fitting Position: Front Axle, Rear, Lower
• Weight [kg]: 0.26
• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 66
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Thickness [mm]: 53
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65.1
• Material: Rubber/Metal
• Fitting Position: Rear, Front Axle Left, Front Axle Right
• Weight [kg]: 0.367
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right, Rear
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• for OE number: 81A407183
• Manufacturer: SASIC

• Fitting Position: Front Axle, Front, both sides
• Material: PU (Polyurethane)
• Weight [kg]: 0.22
• Required quantity: 2
• Colour: red
• Outer Diameter [mm]: 33.7
• Shore-A hardness value, base body: 80
• Inner Diameter [mm]: 12
• Supplementary Article/Info 2: with grease cap
• Manufacturer: TEDGUM

• Construction Year to: 11.2016
• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 66
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Rear, Lower, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.26
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.408
• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 72
• Length [mm]: 94.2
• Manufacturer: RTS