Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Comfort Systems Transmission Exhaust System Kere Ignition Engine Windscreen Cleaning Lights Fuel Supply InteriorProduct
Description
In stock
Price
(incl. VAT)
- Length [mm]: 18
- Outer Diameter [mm]: 30
-
External Thread Size: M24 x 1,
5 - Thread Length [mm]: 12
- Quality/ Grade: 5.8
- Spanner Size: 12
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 14
- Weight [kg]: 0.049
- Observe dimensions:
- Lisainfo: 10 90 5410 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 1.4
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 22
- DIN/ISO: 7603
- Material: Copper
- Weight [kg]: 0.001
-
Name: Rongastihend,
oli ravoolukruvi - Manufacturer: FEB
- Quantity per packing unit: 100
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 25
- Outer Diameter [mm]: 22
- Thickness [mm]: 1.5
- Material: Copper
- Inner Diameter [mm]: 18
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 25
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 34
- Thickness [mm]: 2
- Material: Copper
- Shape: A Shape
- DIN/ISO: 7603
- Manufacturer: ELRING
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 32
- DIN/ISO: 7603
- Material: Copper
- Weight [kg]: 0.003
-
Name: RONGASTIHEND,
OLI RAVOOLUKRUVI - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 33
-
Thread Size: M14 x 1,
50 - Manufacturer: 3RG
- Length [mm]: 33
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 8.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Screw length below head [mm]: 24
- Weight [kg]: 0.037
- Supplementary Article/Info 2: without seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 33
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 8.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Screw length below head [mm]: 24
- Weight [kg]: 0.04
- Supplementary Article/Info 2: without seal ring
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 18
- Outer Diameter [mm]: 30
-
External Thread Size: M24 x 1,
5 - Thread Length [mm]: 12
- Quality/ Grade: 5.8
- Spanner Size: 12
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 14
- Weight [kg]: 0.049
- Observe dimensions:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 33
-
Outer Diameter [mm]: 18.85,
19 -
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 8.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Screw length below head [mm]: 24
- Supplementary Article/Info 2: without seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 33
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 20
- Quality/ Grade: 8.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Screw length below head [mm]: 24
- Weight [kg]: 0.037
- Supplementary Article/Info 2: without seal ring
-
Manufacturer: ENERGY-
NARZÊDZIA WARSZTATOWE
- Quantity per packing unit: 5
- Fitting Position: engine sided
- Thread Length [mm]: 24
- Thread Pitch [mm]: 1.5
- Required quantity: 1
- Material: Steel
-
Surface: Zinc-
coated -
Thread Size: M14 x 1,
5 - Supplementary Article/Info 2: with seal ring
- Length [mm]: 33
-
External Thread [mm]: M14 x 1,
5 - Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 10
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 34
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
- Alternatively:
Manufacturer: REINZ USZCZELKI
- Quantity per packing unit: 100
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 34
- Thickness [mm]: 2
- Shape: A Shape
- Material: Copper
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks