• Värvimarkeering: hall
• Pistikkontaktide arv: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge, 2 pins
• Additional information: Sender for water temperature gauge, 2 pins

• Pistikkontaktide arv: 2
• Pistikukatte kuju: D-kuju
• Lisainfo: Coolant Temperature Sensor
• Additional information: Coolant Temperature Sensor

• Pistikukatte kuju: D-kuju
• Rakendustüüp: hüdrauliline
• Värvimarkeering: roheline
• Keermemõõt: M 10
• Keerme samm (mm): 1
• Pistikkontaktide arv: 1
• Lülitusulatus (bar): 0,3 - 0,6
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Seerianumber: ECC-AU-009
• Keermemõõt: M10x1,0
• Pistikkontaktide arv: 1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistiku värv: sinine
• Manufacturer: NTY
• Name: NTY ECC-AU-009

• Seerianumber: ECC-AU-003
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistiku värv: roheline
• Pistikkontaktide arv: 1
• Name: NTY ECC-AU-003
• Manufacturer: NTY

• Piirangutega toode/piirangu info 2: ilma andurita, koos pistikuga, ilma kaablita
• Pistikkontaktide arv: 1
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Surve (bar): 2,5
• Üldine informatsioon: oil pressure switch；2.5Bar
• Manufacturer: VIKA

• Värvimarkeering: hall
• Seerianumber: ECT-VW-000
• Manufacturer: NTY
• Name: NTY ECT-VW-000

• Quantity: 1
• Kaal (kg): 0,015
• Ühenduste arv: 2
• Kruvipikkus kruvipea all [mm]: 20
• Värv: must
• Värvimarkeering: hall
• Üldine informatsioon: temperature sensor; black
• Manufacturer: VIKA

• Pistikukatte kuju: ovaalne, D-kuju
• Värvimarkeering: hall
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Surve (bar): 6
• Korpusevärv: roheline
• Keermemõõt: M10×1-6g
• Läbimõõt [mm]: 24
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Manufacturer: DELPHI
• Name: DE SW90024
• Lisainfo: SW90024
• Additional information: SW90024

• Värv: must
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• Seerianumber: ECT-VW-002
• Manufacturer: NTY

• Üldine informatsioon: oil pressure switch
• Manufacturer: VIKA

• Quantity: 1
• Kaal (kg): 0,015
• Ühenduste arv: 2
• Kruvipikkus kruvipea all [mm]: 20
• Värv: hall
• Värvimarkeering: hall
• Üldine informatsioon: temperature sensor; grey; 2 pins
• Manufacturer: VIKA

• Engine Code: CZCA
• Colour: green
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Surve (bar): 0,5
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Name: EP 1.800.139
• Manufacturer: EPS

• Engine Code: CZCA
• Colour: green
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Surve (bar): 0,5
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Manufacturer: FACET

• Piirangutega toode/piirangu info 2: ilma andurita, koos pistikuga, ilma kaablita
• Pistikkontaktide arv: 2
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Lülitusrõhk [bar]: 0,5
• Keermemõõt: M10x1.0
• Anduritüüp: lahtine anduri ehitusviis
• Manufacturer: VERNET

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 2
• OE-numbri jaoks: 06A919501
• Piirangutega toode/piirangu info 2: koos osadega
• Manufacturer: NRF

• Surve (bar): 2,6
• Korpusevärv: must
• Keermemõõt: M10*1.5
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Manufacturer: DELPHI
• Name: DE SW90061

• Pistikkontaktide arv: 1
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Asetuslaius (mm): 1,5
• Kokkupuutepind: tinutatud
• Piirangutega toode/piirangu info 2: koos kaabliga
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Quantity: 1
• Üldine informatsioon: oil pressure switch
• Manufacturer: BORSEHUNG

• Lülitusrõhk [bar]: 2,5
• Keermemõõt: M10x1.0
• Anduritüüp: lahtine anduri ehitusviis
• Manufacturer: VERNET

• Surve (bar): 2,5
• Keermemõõt: M10 x 1
• Pistikkontaktide arv: 1
• tehnilise informatsiooni number: circuit N.O.
• Manufacturer: ERA

• Piirangutega toode/piirangu info 2: koos klemmihoidjaga
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info: koos tihendiga
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: CZCA
• Colour Coding: grey
• tootekoodile: 1.660.015K, 1.830.278K, 1.879.946
• Name: EP 1.830.278
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Keermemõõt: M20
• Pistikkontaktide arv: 2
• Korpusevärv: hall
• Pistikukatte kuju: ovaalne
• Manufacturer: ERA

• Engine Code: CZCA
• Colour Coding: grey
• tootekoodile: 26.0015K, 7.3278K, 7.7946
• Manufacturer: FACET

• Keermemõõt: M 10 x 1
• Lülitusulatus (bar): 0,3-0,6
• Kaal (kg): 0,033
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Üldine informatsioon: temperature sensor
• Manufacturer: VIKA

• Engine Code: CZCA
• Colour: blue
• Pressure to [bar]: 2.95
• Pressure from [bar]: 2.15
• Surve (bar): 2,5
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Vastab originaalosa värvile: violetne
• Manufacturer: FACET

• Quantity: 1
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,015
• Ühenduste arv: 2
• Värvimarkeering: hall
• Üldine informatsioon: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Ühenduste arv: 2
• Värvimarkeering: hall
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistiku värv: must
• Seerianumber: ESS-VW-000

• Ühenduste arv: 2
• Värvimarkeering: hall
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info: hoidevedruga, koos tihendiga
• Name: SW 30 92 9318
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Värvimarkeering: hall
• Vastab originaalosa värvile: must
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info: koos tihendiga
• Versioon: IAM
• soovitava lisavarustuse artiklinumber: 0899250, 0905513
• Võimsus [W]: 0,06
• Manufacturer: METZGER

• Anduritüüp: NTC-andur
• Montaaživiis: Kruviühendus
• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 2
• Pistiku värv: must
• OE-numbri jaoks: 03F919501A
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: NRF

• Quantity: 1
• Kaal (kg): 0,48
• Ühenduste arv: 2
• Värv: must
• Üldine informatsioon: knock sensor
• Manufacturer: VIKA

• Engine Code: CZCA
• Housing Colour: black
• Name: EP 1.830.355
• Manufacturer: EPS

• Engine Code: CZCA
• Housing Colour: black
• Manufacturer: FACET

• Version: 1
• Pistikukatte kuju: D-kuju
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Manufacturer: NISSENS

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Quantity: 1
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikukatte kuju: D-kuju
• Üldine informatsioon: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Pistikkontaktide arv: 2
• Pistikukatte kuju: D-kuju
• Piirangutega toode/piirangu info 2: ilma kaablita
• OE-numbri jaoks: 1205185
• Manufacturer: MEAT&DORIA

• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: D-kuju
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pikkus (mm): 24
• vajaminev tükihulk: 1
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Seerianumber: ECP-AU-029
• Manufacturer: NTY

• Pistikkontaktide arv: 2
• Korpusevärv: hall
• Manufacturer: FAE

• Ühenduste arv: 2
• Värv: must
• Kaal (kg): 0,011
• OE-numbri jaoks: 03F 919 501 B
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Seerianumber: ECP-AU-039
• Pistikkontaktide arv: 3
• Anduritüüp: Aktiivne andur
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Manufacturer: NTY
• Name: NTY ECP-AU-039

• Pistikkontaktide arv: 3
• Pistikukatte kuju: D-kuju
• Kuju: gewinkelt
• Kinnitusaukude hulk: 1
• Piirangutega toode/piirangu info 2: koos kruviga, ilma kaablita
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 1
• Pistikkontaktide arv: 3
• Manufacturer: DELPHI

• Ühenduste arv: 2
• Värv: must
• Kaal (kg): 0,011
• OE-numbri jaoks: 03F 919 501 B
• Name: SW 30 10 6571
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Läbimõõt [mm]: 26
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Vedrukuju: Kinnitusvedru
• Pikkus (mm): 20
• Korpusevärv: sinine
• Kõrgus (mm): 57
• Kaal (kg): 0,02
• Värv: hall
• Ühenduste arv: 2
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ühenduste arv: 3
• Kaal (kg): 0,023
• Piirangutega toode/piirangu info 2: koos kruviga
• OE-numbri jaoks: 04C 906 433 G
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2018
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Manufacturer: FAE ELEKTRYKA

• Engine Code: CZCA
• Name: EP 1.957.144
• Manufacturer: EPS

• Pistikkontaktide arv: 2
• Kaal (kg): 0,3
• pakendi pikkus [cm]: 12
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 6
• OE-numbri jaoks: 03F919501B, 04E919501C

• Ühenduste arv: 3
• Kaal (kg): 0,023
• OE-numbri jaoks: 04C 906 433 G
• Piirangutega toode/piirangu info 2: koos kruviga
• Name: SW 33 10 2812
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6PU009168401
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Pistikkontaktide arv: 3
• Manufacturer: DELPHI ELEKTRONIKA

• Üldine informatsioon: hall sender camshaft
• Manufacturer: VIKA

• Anduritüüp: Hallsensor
• Manufacturer: FAE ELEKTRYKA

• Engine Code: CZCA
• Required quantity: 1
• Name: EP 1.953.793
• Manufacturer: EPS

• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos rõngastihendiga, ilma kaablita
• Pistikukatte kuju: ovaalne
• OE-numbri jaoks: 04C 907 601K, 958 907 601 00
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 12.2018
• Name: BS 0261231146
• Manufacturer: BOSCH

• Üldine informatsioon: impulse sender; crackshaft
• Manufacturer: VIKA

• Anduritüüp: Hallsensor
• valikuliselt:
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• alternatiivne remondikomplekt: 551675
• Manufacturer: ERA

• Üldine informatsioon: speedometer
• Manufacturer: VIKA

Manufacturer: MAGNETI MARELLI

• Lambda andur: Sond, Keere eelmääritud
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 570
• Pistikkontaktide arv: 4
• Installatsiooni pool: katalüsaatori ees
• Seerianumber: ESL-AU-016
• Manufacturer: NTY

• Üldine informatsioon: impulse sender crankshaft
• Manufacturer: BORSEHUNG

• Lambda andur: Diagnoosisond
• Installatsiooni pool: pärast katalüsaatorit
• Kaablipikkus (mm): 970
• Garantii: 3 aastat garantii
• Kaal (kg): 0,15
• Ühendushulk: 4
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV126

• Exhaust System: after catalytic converter
• Lambda andur: Sõrmesensor
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 800
• Pistikkontaktide arv: 4
• Garantii: 3 aastat garantii
• Kaal (kg): 0,13
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV127

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Värv: helehall
• Piirangutega toode/piirangu info 2: ilma kaablita
• OE-numbri jaoks: 04C906433
• Manufacturer: MEAT&DORIA

• Takistus [oom]: 3,9
• Pikkus (mm): 750
• Ühendushulk: 4
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 750
• Lambda andur: soojendatud
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM170

• Lambda andur: Sõrmesensor
• Installatsiooni pool: ees
• Üldine informatsioon: lambda probe; front
• Manufacturer: VIKA

• Oxygen Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 95
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 139
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Lambda andur: Sõrmesensor
• Installatsiooni pool: ees
• Üldine informatsioon: lambda probe; front
• Manufacturer: VIKA

• Engine Code: CZCA
• Fitting Position: after catalytic converter
• Required quantity: 1
• Oxygen Sensor: Diagnostic Probe
• Kaablipikkus (mm): 800
• Ühendushulk: 4
• Lambda andur: soojendatud, Titaanandur, Keere eelmääritud
• ka universaaltootena saadav vaata toode-nr.: 1.997.007
• Ülekandeliinide arv: 4
• Name: EP 1.998.199
• Manufacturer: EPS

• Engine Code: CZCA
• Fitting Position: after catalytic converter
• Required quantity: 1
• Oxygen Sensor: Diagnostic Probe
• Kaablipikkus (mm): 800
• Ühendushulk: 4
• Lambda andur: soojendatud, Titaanandur, Keere eelmääritud
• ka universaaltootena saadav vaata toode-nr.: 10.7007
• Ülekandeliinide arv: 4
• Manufacturer: FACET

• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Lambda andur: Titaanandur, soojendatud, Keere eelmääritud
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CZCA
• Fitting Position: before catalytic converter
• Required quantity: 1
• Oxygen Sensor: Regulating Probe
• Kaablipikkus (mm): 650
• Ühendushulk: 4
• Lambda andur: soojendatud, Titaanandur, Keere eelmääritud
• ka universaaltootena saadav vaata toode-nr.: 1.997.007
• Ülekandeliinide arv: 4
• Name: EP 1.998.057
• Manufacturer: EPS

• Engine Code: CZCA
• Fitting Position: before catalytic converter
• Required quantity: 1
• Oxygen Sensor: Regulating Probe
• Kaablipikkus (mm): 650
• Ühendushulk: 4
• Lambda andur: soojendatud, Titaanandur, Keere eelmääritud
• ka universaaltootena saadav vaata toode-nr.: 10.7007
• Ülekandeliinide arv: 4
• Manufacturer: FACET