Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of ribs: 6
-
Length [mm]: 1,
026 - Number of belts: 1
- Manufacturer: DOLZ
- Name: DO SKD226A
- Number of Teeth: 145
- Width [mm]: 25
- Number of belts: 1
-
for article number: KD153/
KD153V - Manufacturer: DOLZ
- Name: DO SKD153
- Number of belts: 1
- Width 1 [mm]: 25
- Number of track rollers: 3
- Number of Teeth: 145
- Manufacturer: SNR
- Name: SN KD457.79
- Additional information: KD457.79 SNR
- Lisainfo: KD457.79 SNR
- Belt Width [mm]: 25
-
Belt Material: PTFE
(polytetrafluoroethylene) - Colour: black
- Number of Teeth: 145
- Belts: with rounded tooth profile
- Name: SK VKMA01278
- Manufacturer: SKF
- Width 1 [mm]: 25
- Number of track rollers: 3
- Number of belts: 1
- Number of Teeth: 145
- Name: SN KD457.85
- Manufacturer: SNR
-
Trim Level: HT -
CXXB # CX - Number of Teeth: 145
- Width [mm]: 25
-
Length [mm]: 1,
381 - Number of belts: 1
- Pulleys contained: 3
- Weight [kg]: 1.3
- Name: DA KTB884
- Manufacturer: DAYCO
- Driven Units: Camshaft
- Trim Level: Blue Motion
- Packaging length [cm]: 26.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 9.5
- Weight [kg]: 1.32
- Number of Teeth: 145
- Width [mm]: 25
- Manufacturer: CONTITECH
Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)
- Number of Teeth 1: 145
- Width 1 [mm]: 25
- Observe service information:
- Follow installation instructions:
- SVHC: No SVHC present!
- Manufacturer: INA
- Name: LU 530065010
- Engine Code: CRKB
- Construction Year to: 10.2016
- Number of Teeth: 145
-
Length [mm]: 1,
381 - Width [mm]: 25
- Tooth Pitch [mm]: 9.525
- Number of track rollers: 3
- Supplementary Article/Info 2: not for dusty operating conditions
- Manufacturer: BOSCH
- Driven Units: Camshaft
-
Article number of the recommended special tool: GAT5170,
GAT5247, GAT4844 - Supplementary Article/Supplementary Info: without water pump
- Manufacturer: GATES
- Lisainfo: K015678XS GAT
- Additional information: K015678XS GAT
- Width of castor bearing surface [mm]: 25
- Number of Teeth: 145
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Belts: with rounded tooth profile
- Weight [kg]: 1.049
-
Belt Material: HNBR
(hydrogenated nitrile butadiene rubber) - Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of Teeth: 145
- Width [mm]: 25
- Weight [kg]: 2.05
- for article number: A255
- Manufacturer: DOLZ
- Name: DO KD153
- Driven Units: Camshaft
- Trim Level: Basic
- Packaging length [cm]: 26.5
- Packaging width [cm]: 16.5
- Packaging height [cm]: 9.5
- Weight [kg]: 1.3
- Number of Teeth: 145
- Width [mm]: 25
- Manufacturer: CONTITECH
Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)
- Number of belts: 1
- Width 1 [mm]: 25
- Number of track rollers: 3
- Number of Teeth: 145
- Name: SN KDP457.790
-
Manufacturer: NTN-
SNR
- Number of Teeth: 145
- Belts: with rounded tooth profile
- Weight [kg]: 1.072
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Version: Not Switchable
- Number of Teeth 1: 145
- Width 1 [mm]: 25
- Water Pump Type: for timing belt drive
- Manufacturer: METELLI ROZRZAD
Supplementary Article/Info 2: without integrated disabling contact, non-switchable water pump
- Width [mm]: 25
- Water pump impeller material: Metal
- Number of Teeth: 145
-
Supplementary Article/Supplementary Info: with fastening/
mounting material -
Supplementary Article/Info 2: non-
switchable water pump - Belts: with rounded tooth profile
- Weight [kg]: 2.021
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Water Pump Type: for timing belt drive
- Number of bolts/screws: 1
- Water pump impeller material: Plastic
- Belt Width [mm]: 25
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of Teeth: 145
-
Name: SK VKMC01278-
1 - Manufacturer: SKF
Supplementary Article/Info 2: with studs, without integrated disabling contact, non-switchable water pump
- Version: Not Switchable
- Number of Teeth 1: 145
- Width 1 [mm]: 25
-
Supplementary Article/Info 2: non-
switchable water pump - Water Pump Type: for timing belt drive
- Manufacturer: METELLI ROZRZAD
- Number of Teeth: 145
- Belts: with rounded tooth profile
- Observe service information:
- Name: SW 30 94 8290
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Driven Units: Camshaft
-
Article number of the recommended special tool: GAT5170,
GAT5247, GAT4844 - Supplementary Article/Supplementary Info: with water pump
- Observe technical data:
- Manufacturer: GATES
- Lisainfo: KP15678XS GAT
- Additional information: KP15678XS GAT
-
Vedavad seadmed: Veepump,
Nukkvõll - Rihmade arv: 1
- Laius (mm): 25
- Hammastehulk: 145
- sisaldab rulle: 3
- Manufacturer: HEPU
Piirangutega toode/piirangu info 2: mitte lülitav veepump, ilma sisseehitatud murda kontaktid, koos kruvidega
- Weight [kg]: 2.23
-
Operating Mode: Electric-
hydraulic - Supplementary Article/Info 2: without integrated disabling contact
- Version: SWITCHABLE
- Specification: AIRTEX SW PATENTED
- Number of belts: 1
-
Name: AI WPK-
197801 - Manufacturer: AIRTEX
- Width 1 [mm]: 25
- Number of Teeth: 145
- Number of track rollers: 3
- Number of belts: 1
- Manufacturer: SNR
- Name: SN KDP457.790S
- Number of Teeth 1: 145
- Width 1 [mm]: 25
- Supplementary Article/Info 2: switchable water pump
- Supplementary Article/Supplementary Info: with water pump
- Observe service information:
- Follow installation instructions:
- SVHC: No SVHC present!
- Manufacturer: INA
- Name: LU 530065030
- Lisainfo: 530065030
- Additional information: 530065030
- Engine Code: CRKB
- Construction Year to: 10.2016
-
Length [mm]: 1,
381 - Number of Teeth: 145
- Width [mm]: 25
- Tooth Pitch [mm]: 9.525
- Pulleys contained: 3
-
Manufacturer: BOSCH ROZRZAD/
PASKI
- Water Pump Type: for timing belt drive
- Number of bolts/screws: 4
- Water pump impeller material: Plastic
- Belt Width [mm]: 25
-
Colour: blue,
black -
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of Teeth: 145
- Name: SK VKMC01278
- Manufacturer: SKF
Supplementary Article/Info 2: with studs, with integrated disabling contact, switchable water pump
- Number of Teeth: 145
- Width [mm]: 25
- Weight [kg]: 2.12
- for article number: A255V
- Manufacturer: DOLZ
- Name: DO KD153V
- Driven Units: Camshaft
- Trim Level: Blue Motion
- Packaging length [cm]: 19.5
- Packaging width [cm]: 18.2
- Packaging height [cm]: 18.7
- Number of Teeth: 145
- Weight [kg]: 2.144
- Width 1 [mm]: 25
- Manufacturer: CONTITECH
- Name: CT 1168WP1
Supplementary Article/Info 2: switchable water pump, with integrated disabling contact
- Vedavad seadmed: Nukkvõll
- Rihmade arv: 1
- Laius (mm): 25
- Hammastehulk: 145
- sisaldab rulle: 3
- Manufacturer: HEPU
Piirangutega toode/piirangu info 2: lülitav veepump, koos sisseehitatud NC kontaktid, koos kruvidega
- Driven Units: Camshaft
-
Article number of the recommended special tool: GAT5170,
GAT5247, GAT4844 - Supplementary Article/Supplementary Info: with water pump
- Observe technical data:
- Manufacturer: GATES
Supplementary Article/Info 2: with integrated disabling contact, switchable water pump
- Driven Units: Camshaft
- Trim Level: Basic
- Packaging length [cm]: 19.5
- Packaging width [cm]: 18.2
- Packaging height [cm]: 18.7
- Number of Teeth: 145
- Weight [kg]: 2.159
- Width 1 [mm]: 25
- Manufacturer: CONTITECH
Supplementary Article/Info 2: switchable water pump, with integrated disabling contact
- Width of castor bearing surface [mm]: 26
- Water pump impeller material: Plastic
- Number of Teeth: 145
- Belts: with rounded tooth profile
- Weight [kg]: 1.899
-
Belt Material: HNBR
(hydrogenated nitrile butadiene rubber) - for OE number: 04L 198 119 K S2
- Name: SW 33 11 0491
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Driven Units: Camshaft,
Oil Pump - Trim Level: Blue Motion
- Packaging length [cm]: 23.5
- Packaging width [cm]: 19.5
- Packaging height [cm]: 20.9
- Weight [kg]: 2.173
- Width 1 [mm]: 25
- Width 2 [mm]: 10.2
- 2 Belts:
- Number of Teeth 2: 50
- Number of Teeth 1: 145
- Engine Timing: Timing belt in the oil bath
- Manufacturer: CONTINENTAL CTAM
Supplementary Article/Info 2: switchable water pump, with integrated disabling contact Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks