• Weight [kg]: 0.02
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 28SKV908
• Manufacturer: ESEN SKV

• Fitting Position: Front
• Sensor Type: Ultrasonic Sensor
• Colour: white
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: with adhesive film, Holder may need adaptation
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mounting Type: Glued
• Height 1 [mm]: 27.5
• Height 2 [mm]: 35
• Manufacturer: METZGER

• Colour: black
• Number of connectors: 3
• Fabrication Number: EPDC-VW-004
• Manufacturer: NTY
• Name: NTY EPDC-VW-004
• Lisainfo: VW GOLF V/VI/BORA/CADDY
• Additional information: VW GOLF V/VI/BORA/CADDY

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Fabrication Number: EPDC-AU-006
• Manufacturer: NTY
• Name: NTY EPDC-AU-006

• Fitting Position: Front and Rear
• Manufacturer: YSPARTS

• Sensor Type: Ultrasonic Sensor
• Fitting Position: both sides, Front, Rear, inner
• Fabrication Number: EPDC-CH-002
• Manufacturer: NTY
• Name: NTY EPDC-CH-002

• Fitting Position: Rear, Front
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV036

• Fitting Position: Front, Rear
• Number of connectors: 3
• Colour: black
• Manufacturer: JP GROUP
• Lisainfo: Sensor, park assist sensor
• Additional information: Sensor, park assist sensor

• Fitting Position: both sides, Rear, Front
• Vehicle Identification Number (VIN) from: 7M-2-526 001
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Length [mm]: 46
• Length from [mm]: 46
• Width [mm]: 27
• Height [mm]: 47
• Colour: black
• Shape: angled
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Over-paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Fitting Position: Front, Rear
• Vehicle Identification Number (VIN) from: 7M-2-526001
• Chemical Properties: Paintable
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Number of pins: 3
• Name: SENSOR, PARKIMISABI
• Manufacturer: MAX

• Sensor Type: Ultrasonic Sensor
• Fitting Position: Rear, Front
• General Information: ultrasound sensor
• Manufacturer: VIKA

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Surface: primed
• Number of pins: 3
• Shape: angled
• Chemical Properties: Paintable
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity: 4
• Fitting Position: both sides, Front, Rear
• Vehicle Identification Number (VIN) from: 7M-2-526 001
• Length [mm]: 46
• Width [mm]: 27
• Height [mm]: 47
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Surface: primed
• Number of pins: 3
• Number of connectors: 3
• Chemical Properties: Over-paintable
• Housing Colour: beige
• See accessories list for additionally required parts:
• Article number of recommended accessories: V99-72-0002
• Weight [kg]: 0.031
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Rear, both sides
• Vehicle Identification Number (VIN) from: 7M_2_526 001
• Chemical Properties: Over-paintable
• Colour: black
• Number of pins: 3
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Name: Sensor, parkimisabi
• Manufacturer: MEY

• Fitting Position: Front, Rear
• Vehicle Identification Number (VIN) from: 7M-2-526001
• Chemical Properties: Paintable
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Number of pins: 3
• Always compare old and new part (in particular OE No.):
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: both sides
• Sensor Type: Ultrasonic Sensor
• for OE number: 7M3 919 275 A
• Chemical Properties: Paintable
• Length [mm]: 75
• Guarantee: 3 years guarantee
• Number of pins: 3
• Voltage [V]: 12
• Housing material: Plastic
• Width [mm]: 49
• Height [mm]: 36
• Weight [g]: 31
• Operating Mode: Electric
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: both sides, Front, Rear
• Vehicle Identification Number (VIN) from: 7M-2-526 001
• Number of pins: 3
• Chemical Properties: Paintable
• Manufacturer: FAE ELEKTRYKA

• Fitting Position: Front, Rear
• Vehicle Identification Number (VIN) from: 7M-2-526 001
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Manufacturer: METZGER

• Observe technical data:
• Manufacturer Restriction: VAG
• Cable Length [mm]: 200
• Number of pins: 6
• Socket Width [mm]: 1.6
• Cable Cross Section [mm²]: 0.75
• Supplementary Article/Info 2: with plug
• Supplementary Article/Supplementary Info: with gaskets/seals
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Required quantity: 4
• Fitting Position: both sides, Front, Rear
• Vehicle Identification Number (VIN) from: 7M_2_526 001
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: white
• Shape: angled
• Shaft form: oval
• Assy./disassy. by qualified personnel required!:
• Name: Sensor, parkimisabi
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: Gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: without Display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Park distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (park distance control): with parameter programming PPS
• Trailer Hitch: with automatic park distance control deactivation
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.156
• Name: PARKIMISABI
• Manufacturer: VAL
• Lisainfo: VAL632200
• Additional information: VAL632200

Park distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear General Information: Activation of the front sensors through the main brake

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: without Display
• Mounting Type: Plugged
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Park distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (park distance control): with parameter programming PPS
• Trailer Hitch: with automatic park distance control deactivation
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.2
• Name: ZESTAW PARKOWANIA PRZàD/TY 4 SZT. FLUSH MOUNT
• Manufacturer: VAL

Park distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: with LCD colour display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Park distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (park distance control): with parameter programming PPS
• Trailer Hitch: with automatic park distance control deactivation
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.22
• Name: PARKIMISABI
• Manufacturer: VAL

Park distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear General Information: Activation of the front sensors through the main brake

• Supplementary Article/Info 2: with sensor
• Number of sensors: 8
• Fitting Position: Front and Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: with LCD colour display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Park distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (park distance control): with parameter programming PPS
• Trailer Hitch: without park distance control deactivation
• Mounting Time from (in hours): 3
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 2.08
• Name: PARKIMISABI
• Manufacturer: VAL
• Lisainfo: VAL632202
• Additional information: VAL632202

Park distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear General Information: Activation of the front sensors through the main brake