• Engine Code: APE
• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Protective Cap/Bellow, shock absorber
• Additional information: Protective Cap/Bellow, shock absorber

• Fitting Position: Front Axle
• Article number of recommended accessories: PK001, MK067
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 3.9
• Bore Diameter [mm]: 27
• Piston Rod Diameter [mm]: 20
• Packaging length [cm]: 51.5
• Packaging width [cm]: 16.2
• Packaging height [cm]: 16.2
• Manufacturer: MONROE
• Lisainfo: 11250 MON
• Additional information: 11250 MON

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Suspension: for vehicles with heavy duty suspension
• Fitting Position: Rear Axle
• Height [mm]: 104
• Material: Rubber
• Inner Diameter [mm]: 43
• Manufacturer: MAX

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. POLO 94-

• for OE number: 6N0513425A
• Fitting Position: Rear Axle
• Material: Plastic
• Weight [g]: 31
• Name: IM 37454
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Height [mm]: 206
• Manufacturer: MAX
• Lisainfo: 72-2185
• Additional information: 72-2185

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• Production date from: 09/00
• Production date to: 10/02
• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• Height [mm]: 206
• for OE number: 6N0413175A
• Manufacturer: SASIC

• Quantity: 2
• Vehicle Identification Number (VIN) from: 6K-X-463 223
• Vehicle Identification Number (VIN) to: 6K-X-463 222
• Installatsiooni pool: Esisild
• Kaal (kg): 0,07
• Materjal: Termoplast
• vajaminev tükihulk: 2
• Välisläbimõõt [mm]: 68, 80
• Üldine informatsioon: protective pipe; front
• Manufacturer: VIKA

• for OE number: 6N0413175A
• Fitting Position: Front Axle
• Height [mm]: 193
• Material: Thermoplast
• Weight [g]: 69
• Diameter 1 [mm]: 63.6
• Diameter 2 [mm]: 74
• Name: IM 37485
• Manufacturer: ORIGINAL IMPERIUM

• Weight [kg]: 0.07
• Inner Diameter 1 [mm]: 63
• Height [mm]: 198
• Fitting Position: Front Axle
• Inner Diameter 2 [mm]: 72
• Required quantity: 2
• Manufacturer: TEDGUM

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: SW 30 93 6006
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Height [mm]: 206
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• Fitting Position: Front Axle
• Weight [kg]: 0.108
• Packaging length [cm]: 19
• Packaging width [cm]: 7.8
• Packaging height [cm]: 7.8
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: without spring seat
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Suspension: for vehicles with bad road version
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: without spring seat
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Suspension: for vehicles with bad road version
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amort-süsteem: kaks toru
• Manufacturer: DENCKERMANN AMORTYZATORY

• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Amorditüüp: Õlisurve
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-694705
• Amort-Ehitusliik: vedrukandev amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Manufacturer: AUTO-GH

• Construction Year to: 08.2002
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Thread Size: M10x1
• Piston Rod Length [mm]: 275
• Piston Rod Diameter [mm]: 12.5
• Suspension Strut Outer Diameter [mm]: 38
• Manufacturer: OPTIMAL ZAWIESZENIE

Shock Absorber Design: Suspension Strut Insert, Suspension Strut, Spring-bearing Damper

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: MAX
• Lisainfo: MGA-5629
• Additional information: MGA-5629

• Installatsiooni pool: Tagasild, Tagasild paremal, Tagasild vasakul
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-694705
• Amort-Ehitusliik: vedrukandev amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Manufacturer: AUTO-GH

• Construction Year to: 08.2002
• Installatsiooni pool: Tagasild
• Amort-süsteem: kaks toru
• Amorditüüp: Gaasirõhk
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Piirangutega toode/piirangu info: ilma vedrutaldrikuta
• soovitava lisavarustuse artiklinumber: SMJ0242
• Amort-Ehitusliik: Teleskoop-amort
• Manufacturer: JAPKO

• Construction Year to: 08.2002
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Supplementary Article/Supplementary Info: without spring seat
• Article number of recommended accessories: SMA0242
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA-AMORTYZATORY

• Fitting Position: Front Axle
• Suspension: for vehicles with sports suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year to: 08.2002
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Construction Year to: 08.2002
• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: vedrukandev amort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Manufacturer: KAVO PARTS

• Fitting Position: Front Axle
• Suspension: for vehicles with sports suspension
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Tihvti all
• Amort-süsteem: kaks toru
• Manufacturer: DENCKERMANN AMORTYZATORY

• Construction Year to: 08.2002
• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: without spring seat
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Construction Year to: 08.2002
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY
• Additional information: 2000198 KAMOKA
• Lisainfo: 2000198 KAMOKA

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-1203, 72-1197
• Name: AMORT
• Manufacturer: MAX
• Lisainfo: MGA-2041
• Additional information: MGA-2041

• Construction Year to: 08.2002
• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt
• Name: CFD 454786
• Manufacturer: DACO

• Construction Year to: 08.2002
• Installatsiooni pool: Esisild
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: DACO GERMANY

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY
• Additional information: 2001047 KAMOKA
• Lisainfo: 2001047 KAMOKA

• Fitting Position: Front Axle
• Suspension: for vehicles with sports suspension
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Tihvti all
• Amort-süsteem: kaks toru
• Manufacturer: DENCKERMANN AMORTYZATORY

• Construction Year to: 08.2002
• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: KAVO PARTS

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: 100 512 0008, 100 512 0007, 100 740 0006
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMA0133, SMA0143, SMA0145, SMA0168
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ASHIKA-AMORTYZATORY

• Construction Year to: 08.2002
• Fitting Position: Rear Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Supplementary Article/Supplementary Info: with spring seat
• Shock Absorber Design: Spring-bearing Damper
• Manufacturer: KAYABA

• Construction Year to: 08.2002
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMA0133, SMA0143, SMA0145, SMA0168
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ASHIKA-AMORTYZATORY

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Amorditüüp: Õlisurve
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-694701
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: AUTO-GH

• Construction Year to: 08.2002
• Installatsiooni pool: Esisild
• Amort-süsteem: kaks toru
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• soovitava lisavarustuse artiklinumber: SMJ0133, SMJ0143, SMJ0145, SMJ0168
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: JAPKO

• Installatsiooni pool: Esisild
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: Vedruamort
• soovitava lisavarustuse artiklinumber: SMJ0133, SMJ0143, SMJ0145, SMJ0168
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: JAPKO

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• soovitava lisavarustuse artiklinumber: GH-694701
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: AUTO-GH

• Construction Year to: 08.2002
• Fitting Position: Rear Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Supplementary Article/Supplementary Info: without spring seat
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: KAYABA AMORTYZATORY

Technical Information: SG-701 is available to replace the old spring seat if damage d or unable to be reused.

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Replace in pairs only:
• Name: Amort
• Manufacturer: MEY

Article number of recommended accessories: 100 412 0003, 100 412 9020/S, 100 640 0010, 100 412 0003/S, 100 412 1020/S

• Construction Year to: 08.2002
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Name: Amort
• Manufacturer: KYB

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL

Lisainfo: "Tootja: BILSTEIN
SEAT IBIZA/CORDOBA
(kvaliteediklass: Q)"

• Construction Year to: 08.2002
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Supplementary Article/Supplementary Info: without spring seat
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: KAYABA AMORTYZATORY

Technical Information: SG-701 is available to replace the old spring seat if damage d or unable to be reused.

• Fitting Position: Rear Axle
• Suspension: for vehicles with bad road version
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Parameter: SEOV27X171A
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Parameter: SFE30/20X167A
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 08.2002
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAYABA AMORTYZATORY

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 17-104029

Lisainfo: "Tootja: BILSTEIN
SEAT/VW 00-
(kvaliteediklass: Q)"

• Quantity per packing unit: 2
• Quantity per axle: 1
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 50
• Thread Size: M14x1,5
• Length 1 [mm]: 532
• Length 2 [mm]: 365
• Piston Rod Diameter [mm]: 22
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with bad road version
• Parameter: SFE32/22X155A
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• reinforced version:
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
VW POLO/GOLF, 94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
VW POLO/GOLF, 94-
(kvaliteediklass: Q)"

• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Quantity per axle: 1
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Thread Size: M10x1,0
• Length 1 [mm]: 555
• Length 2 [mm]: 360
• Piston Rod Diameter [mm]: 12
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!