• Fitting Position: Front Axle, Front Axle both sides
• for PR number: G01, G02
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A3 SPORTBACK (8PA),
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A3 SPORTBACK (8PA),
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• General Information: Spring support; front spring disc
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• General Information: spring support; down
• Manufacturer: BORSEHUNG

• for PR number: 0N4
• Quantity per packing unit: 5
• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Upper, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 82
• Overall Length [mm]: 94
• Bolt Head-/Nut Design: Male Hex
• Surface: Zink flake coated
• Strength class: 10.9
• Axle: Independent wheel suspension
• Name: Rattakalde korrektuurkruvi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ZWT-VW-034SK
• Manufacturer: NTY

• Weight [kg]: 0.127
• Packaging length [cm]: 10.1
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.6
• Manufacturer: FEBEST

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Upper, both sides
• Thread Size: M 12
• Screw length below head [mm]: 82
• Overall Length [mm]: 94
• Strength class: 10.9
• Axle: Independent wheel suspension
• Supplementary Article/Info 2: with nut, with protect screen
• Name: Rattakalde korrektuurkruvi
• Manufacturer: MAX

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Lower, both sides
• Thread Size: M 12
• Screw length below head [mm]: 97
• Overall Length [mm]: 109
• Strength class: 10.9
• Axle: Independent wheel suspension
• Name: Rattakalde korrektuurkruvi
• Manufacturer: MAX

• Length [mm]: 92.2
• Outer Diameter [mm]: 35
• External Thread Size: M12 x 1,5
• Spanner Size: 18
• Shaft Length [mm]: 32.8
• Screw length below head [mm]: 81
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.136
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 11.2017
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Axle: Independent wheel suspension
• Suspension: for vehicles without electronic suspension control
• Chassis Type: High chassis
• Name: COC 49495773
• Manufacturer: CORTECO

• Quantity per packing unit: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AB-VW-026K
• Manufacturer: NTY

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.24
• Name: Montaa§ikomplekt, roolissteem
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front Axle both sides
• for PR number: G01, G02
• Quality class: PJ
• Name: Shock absorber protection kit left+right

• Fitting Position: Front Axle
• Lisainfo: Top Strut Mounting
• Additional information: Top Strut Mounting

• Fitting Position: Front Axle, Front Axle both sides
• Quality class: PJ
• Name: Shock absorber protection kit left+right

for PR number: G01, G02, G03, L01, L02, L03, L04, L05, L06, L07, L08, L09, L10

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AD-VW-033
• Manufacturer: NTY
• Name: NTY AD-VW-033

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• replacement in pairs recommended:
• Name: Vedruamordi tugilaager
• Manufacturer: MEY

• for OE number: 5Q0511357F
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [g]: 229
• Component Number: 2
• Name: IM 51039
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Quantity per axle: 2
• Name: Laager,amorditugilaager
• Manufacturer: SKF

• Construction Year to: 06.2022
• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!BEZ O½YSKA!!!

• Fitting Position: Front Axle
• Inner Diameter [mm]: 78.5
• Outer Diameter [mm]: 127.5
• Bearing Type: Ball Bearing
• SVHC: No SVHC present!
• Manufacturer: FAG

• Construction Year to: 06.2022
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 37574 01
• Manufacturer: LEMFORDER
• Name: LMI 3695101

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C SVHC: No information available, please contact the manufacturer!

• Construction Year to: 06.2022
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 803 024
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Alternative Repair Kit: 118 038
• Quantity per axle: 2
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 06.2022
• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Name: SW 30 94 0171
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Weight [kg]: 0.34
• Required quantity: 2
• Thickness [mm]: 60
• Inner Diameter [mm]: 10
• Material: Aluminium
• Mounting Type: Rubber-Metal Mount
• General Information: Shock absorber upper cover
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Inner Diameter [mm]: 14
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• General Information: Rubber and dust cover kit; rear
• Manufacturer: VIKA

• Weight [kg]: 0.415
• Required quantity: 2
• Supplementary Article/Info 2: without bearing
• Fitting Position: Rear Axle
• Manufacturer: TEDGUM

• Axle: Rigid Axle
• for PR number: UC7
• Length [mm]: 133
• Material: PU (Polyurethane), Thermoplast
• Fitting Position: Rear Axle
• Weight [kg]: 0.392
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB
• Additional information: FE175365
• Lisainfo: FE175365

Suspension: for vehicles with lifted suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Name: Laager,amorditugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Weight [kg]: 0.33
• Packaging length [cm]: 12.7
• Packaging width [cm]: 12.7
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Manufacturer: MAX

Name: ZESTAW MONTA½OWY AMORTYZATORA P. GLOF/OCTAVIA 06- (ODBOJEONY)

• Production date to: 19/11/17
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 60
• for OE number: 5Q0513353G
• Manufacturer: SASIC

• Fitting Position: Rear Axle Left, Rear Axle Right
• Axle Version: standard rear axle
• for PR number: UC8
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Weight [kg]: 0.8
• Fitting Position: Front Axle
• Required quantity: 2
• Inner Diameter [mm]: 14
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber top rubber; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: LU 814018310
• Manufacturer: FAG

• Construction Year to: 11.2017
• Axle: Rigid Axle, Independent wheel suspension
• Suspension: for vehicles with increased ground clearance
• Block Separation:
• for PR number: UC8
• Fitting Position: Rear Axle
• Manufacturer: KAVO

• Fitting Position: Front Axle Left, Front Axle Right
• for PR number: G01, G02
• Required quantity: 1
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 11.2017
• for PR number: UC7, UC8
• Axle Version: standard rear axle
• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LEMFORDER

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B SVHC: No information available, please contact the manufacturer!

• Thickness [mm]: 40
• Width [mm]: 127
• Weight [kg]: 0.31
• Bearing Type: Rolling Bearing
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Material: Plastic, Metal
• Required quantity: 2
• Fitting Position: Front Axle
• General Information: deep groove ball thrust bearing; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle Right, Front Axle Left
• Mounting Type: Rubber Mount
• Length [mm]: 41.2
• Weight [kg]: 0.798
• Inner Diameter [mm]: 14.1
• Manufacturer: RTS

• Suspension: for vehicles with electronic suspension control
• for PR number: G03
• Fitting Position: Front Axle
• Weight [kg]: 0.376
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [kg]: 0.8
• Required quantity: 2
• Inner Diameter [mm]: 14
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber top rubber; front
• Manufacturer: VIKA

• Quantity: 2
• Fitting Position: Front Axle
• Quantity Unit: Kit
• General Information: Rubber and dust cover kit; front; 2 pcs
• Manufacturer: BORSEHUNG

• Construction Year to: 11.2017
• Suspension: for vehicles with electronic suspension control
• Fitting Position: Rear Axle
• Manufacturer: BILSTEIN
• Name: Suspension strut support bearing left=right
• Quality class: Q

• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Manufacturer: SKF

Name: PODUSZKA AMORT. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- Z O½YSKIEM

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with rolling bearing
• Quantity per axle: 2
• Replace in pairs only:
• for components see parts list:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Manufacturer: BILSTEIN
• Name: BI 12-243945
• Quality class: Q

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Manufacturer: FAG-ELEMENTY ZAWIESZENIA

• Fitting Position: Front Axle
• General Information: Shock absorber rubber kit; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle both sides
• Weight [kg]: 1.1
• Inner Diameter [mm]: 14
• Supplementary Article/Info 2: with rolling bearing
• Manufacturer: METALCAUCHO