• Engine Code: DGTC
• Thread Size: M12x1,5
• Spanner Size: 17
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Engine Code: DGTC
• Thread Size: M12x1,5
• Spanner Size: 17
• Manufacturer: FACET

• Thread Size: M 12x1.5
• Number of pins: 2
• Housing Colour: brown
• Manufacturer: FAE

• Number of pins: 3
• Fitting Position: Cylinder Head
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: DGTC
• Colour: black
• Plug Type: Screw Contact
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: DGTC
• Colour: black
• Plug Type: Screw Contact
• Manufacturer: FACET

• Quantity: 1
• Number of pins: 3
• Manufacturer: DELPHI ELEKTRONIKA

• Sensor Type: NTC Sensor
• Number of pins: 2
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Connector Shape: oval
• Spanner Size: 17
• Bolt Head-/Nut Design: Male Star
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: DGTC
• Thread Size: M12x1,5
• Spanner Size: 16
• Manufacturer: FACET

• General Information: Air intake pressure sensor
• Manufacturer: BORSEHUNG

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 17
• for OE number: 04L919824C
• Manufacturer: MEAT & DORIA

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358380651
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Fabrication Number: ECS-VW-000
• Manufacturer: NTY

• General Information: Air intake pressure sensor
• Manufacturer: BORSEHUNG

• Number of connectors: 3
• Weight [kg]: 0.01
• for OE number: 04L 145 049 AF SK
• Name: SW 33 10 8053
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2020
• for OE number: 04L145049AF
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Engine Code: DGTC
• Required quantity: 1
• Name: EP 1.953.774
• Manufacturer: EPS

• Number of connectors: 3
• Fabrication Number: ECS-AU-005
• Manufacturer: NTY

• Engine Code: DGTC
• Required quantity: 1
• Manufacturer: FACET

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• General Information: Camshaft position sensor
• Manufacturer: VIKA

• Fuel Mixture Formation: Direct Injection
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV409

• Required quantity: 2
• Overall Length [mm]: 70
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Spanner Size: 16
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Construction Year to: 12.2020
• Manufacturer: BOSCH

• Number of pins: 3
• Pressure from [kPA]: 50
• Manufacturer: DELPHI ELEKTRONIKA

• Engine Code: DGTC
• Required quantity: 1
• Pressure from [kPA]: 29
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.48
• Name: EP 1.993.327
• Manufacturer: EPS

• Engine Code: DGTC
• Pressure from [kPA]: 29
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.48
• Manufacturer: FACET

• Quantity: 1
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Required quantity: 1
• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• General Information: Pressure difference sensor
• Manufacturer: BORSEHUNG

• Quantity: 1
• Number of pins: 3
• Pressure from [kPA]: 48
• Name: DE PS20074-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Pressure [Pa] from: 48,500
• Pressure [Pa] to: 400,000
• Manufacturer: FAE

• Vehicle Equipment: for vehicles with diesel soot filter
• Number of pins: 3
• Housing Colour: black
• Connector Shape: oval
• Number of mounting bores: 1
• Housing material: GRP (Glass fibre Reinforced Plastic), PBT
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 1
• for OE number: 04L906051B
• Manufacturer: MEAT&DORIA

• Exhaust System: before soot particulate filter
• Connector Shape: oval
• Number of pins: 3
• Pressure [Pa] from: -14,000
• Pressure [Pa] to: 100,000
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Fabrication Number: EGT-VW-082
• for OE number: 04L906088BF
• Number of pins: 2
• Cable Length [mm]: 650
• Sensor Type: PTC
• Manufacturer: NTY

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DLP

Name: CZUJNIK CI—NIENIA SPALIN VW ARTEON, CADDY, CRAFTER, GOLF 12-

• Engine Code: DGTC
• Exhaust System: before soot particulate filter
• Manufacturer: FACET

Manufacturer: NRF

• for PR number: TJ1
• Guarantee: 5 years guarantee
• Number of pins: 3
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Construction Year to: 06.2021
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 630
• Overall Length [mm]: 745
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Manufacturer: VALEO

• Construction Year to: 06.2021
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 720
• Overall Length [mm]: 835
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Manufacturer: VALEO
• Name: VA 368901

• Number of connectors: 3
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.026
• Name: Andur, heitgaasisurve
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 1,060
• Name: SONDA LAMBDA A3, Q2, Q3 11-
• Manufacturer: DLP

• General Information: Fuel pressure sensor
• Manufacturer: BORSEHUNG

• Required quantity: 1
• Fitting Position: after soot particulate filter
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 30
• Cable Length [mm]: 620
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• General Information: Pressure difference sensor
• Manufacturer: VIKA

• Fitting Position: before soot particulate filter
• for OE number: 04L 906 088 DH
• Cable Length [mm]: 720
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: before soot particulate filter
• Socket colour: brown
• Weight [kg]: 0.09
• Shape: L Shape
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV384

• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 24
• Number of pins: 3
• Version: IAM
• Manufacturer: METZGER

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009409591
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Thread Size: M18 x 1,5
• Spanner Size: 27
• Number of pins: 3
• Name: Andur,ktuserohk
• Manufacturer: MEY

• Engine Code: DGTC
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 04L 906 088 BF
• Overall Length [mm]: 760
• Cable Length [mm]: 620
• Number of pins: 2
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: after soot particulate filter
• Socket colour: beige
• Weight [kg]: 0.09
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Exhaust System: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 3
• Diameter 1 [mm]: 8
• Diameter 2 [mm]: 8
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009403221

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: DGTC
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range from [kPa]: -14
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Fitting Position: Soot Particulate Filter
• Manufacturer: PIERBURG

• Required quantity: 1
• Fitting Position: before exhaust turbocharger
• Cable Length [mm]: 530
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Name: Andur,Nukkvollipositsioon
• Manufacturer: VAL

• Engine Code: DGTC
• Fitting Position: after soot particulate filter
• Thread Size: M14x1,5
• Cable Length [mm]: 696
• Socket colour: beige
• Manufacturer: FAE

• General Information: Exhaust temperature sensor
• Manufacturer: VIKA

• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Manufacturer: MEYLE

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.23
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV230

• Required quantity: 1
• Fitting Position: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 30
• Cable Length [mm]: 719
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Construction Year to: 12.2020
• Name: Andur, heitgaasisurve
• Manufacturer: BOS

• Required quantity: 1
• Fitting Position: before catalytic converter
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Fitting Position: after soot particulate filter
• Number of pins: 2
• Cable Length [mm]: 665
• Sensor Type: PTC
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• General Information: Exhaust temperature sensor
• Manufacturer: VIKA

• Exhaust System: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 640
• Number of pins: 2
• Name: DE TS30317-12B1
• Manufacturer: DELPHI

• Fitting Position: before exhaust turbocharger
• Component Number: G 235
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: black
• Sensor Type: NTC Sensor
• Cable Length [mm]: 530
• Overall Length [mm]: 553
• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Connector Shape: D Shape
• Spanner Size: 17
• Supplementary Article/Info 2: with heat shield pipe, with cable
• Bolt Head-/Nut Design: Hexagon
• Shape: Bent
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Fuel Mixture Formation: Direct Injection
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• External Thread Size: M18 x 1,5
• Number of connectors: 3
• Weight [kg]: 0.06
• for OE number: 04L 906 054
• Name: ANDUR,KšTUSEROHK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 540
• Manufacturer: DELPHI
• Name: DE ES21056-12B1

• Fitting Position: after soot particulate filter
• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 645
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358226301
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Exhaust System: before soot particulate filter
• Quantity: 1
• Cable Length [mm]: 740
• Number of pins: 2
• Name: DE TS30409-12B1
• Manufacturer: DELPHI

• Fitting Position: before soot particulate filter
• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 719
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358226291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: DGTC
• Fitting Position: before soot particulate filter
• Thread Size: M14x1,5
• Cable Length [mm]: 766
• Socket colour: brown
• Manufacturer: FAE

• External Thread Size: M14 x 1,5
• Spanner Size: 17
• Number of connectors: 2
• Fitting Position: behind exhaust turbocharger
• Cable Length [mm]: 632
• Weight [kg]: 0.07
• Name: ANDUR, HEITGAASITEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.