Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: frontal sided
- Engine Code: ASV
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Width [mm]: 10
-
Material: FPM
(fluoride rubber) - Manufacturer: JP GROUP
-
Lisainfo: Oil seal,
35x48x10 mm
- Fitting Position: frontal sided
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 32
- Width [mm]: 10
-
Manufacturer: JP GROUP A/
S - Lisainfo: PAKENDIS 10 tk
- Fitting Position: frontal sided
- Engine Code: ASV
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Width [mm]: 10
- Manufacturer: JP GROUP
-
Lisainfo: Oil seal,
35x48x10
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
- Fitting Position: frontal sided
- Weight [kg]: 0.016
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
-
Material: ACM
(Polyacrylate) - Required quantity: 1
- Thickness [mm]: 10
- General Information: seal ring;35*48*10 mm
- Manufacturer: VIKA
- Fitting Position: frontal sided
- General Information: seal ring
- Manufacturer: VIKA
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
-
Material: ACM
(Polyacrylate) - Fitting Position: frontal sided
- Weight [kg]: 0.016
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 10
- for OE number: 068 103 085 E
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Weight [kg]: 0.023
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: frontal sided
- Engine Code: ASV
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist -
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Fitting Position: frontal sided
- Engine Code: ASV
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist - Manufacturer: REINZ
-
Name: RN 81-
24292- 10
- Engine Code: ASV
- Quantity per packing unit: 10
- Fitting Position: frontal sided
- Weight [kg]: 0.035
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: frontal sided
- General Information: shaft oil seal
- Manufacturer: BORSEHUNG
- Engine Code: ASV
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist - Radial Shaft Seal Design: ASW
- Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Name: DRM 01969
- Fitting Position: frontal sided
- Engine Code: ASV
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Supplementary Article/Info 2: with mounting sleeve
- Observe mounting information:
- Manufacturer: ELRING
- Lisainfo: 155.560 ELR
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Engine Code: ASV
- Fitting Position: transmission sided
- Supplementary Article/Info 2: with flange
-
Swirl Type: Left-
hand Twist - Outer Diameter [mm]: 152
- Inner Diameter [mm]: 85
- Height [mm]: 15
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: transmission sided
-
Fabrication Number: NUP-
VW- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: ASV
- Fitting Position: transmission sided
- for OE number: 038103171
-
Material: PTFE
(polytetrafluoroethylene) - Manufacturer: FAI
- Fitting Position: transmission sided
- Weight [kg]: 0.16
- Inner Diameter [mm]: 85
-
Outer Diameter [mm]: 131,
152 -
Material: PTFE
(polytetrafluoroethylene) - Required quantity: 1
- Supplementary Article/Info 2: with flange
- Thickness [mm]: 15.7
- General Information: seal ring
- Manufacturer: VIKA
- Fitting Position: transmission sided
- Engine Code: ASV
- Inner Diameter [mm]: 85
- Radial Shaft Seal Design: IWD
-
Swirl Type: Left-
hand Twist - Housing Type: with housing
- Supplementary Article/Info 2: with mounting sleeve
- Manufacturer: ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Fitting Position: transmission sided
- Engine Code: ASV
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
- Manufacturer: REINZ
-
Name: RN 81-
90010- 00
- Fitting Position: transmission sided
- General Information: shaft seal; crankshaft
- Manufacturer: BORSEHUNG
- Fitting Position: transmission sided
- Engine Code: ASV
- Housing Type: with housing
- Inner Diameter [mm]: 131
- Outer Diameter [mm]: 152
- Height [mm]: 16
-
Swirl Type: Left-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) - for OE number: 06A103171A
- Manufacturer: AJUSA
- Thickness [mm]: 15.7
- Inner Diameter [mm]: 85
-
Outer Diameter [mm]: 131,
152 -
Material: PTFE
(polytetrafluoroethylene) - Fitting Position: transmission sided
- Weight [kg]: 0.16
- Supplementary Article/Info 2: with flange
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks