• for OE number: 59919501
• Temperature range to [°C]: 150
• Manufacturer: KAMOKA

• Piirangutega toode/piirangu info 2: koos pistikuga
• Juhtmete arv (paranduskomplekt, kaablikomplekt): 2
• Ühendushulk: 2
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: Kaabli paranduskomplekt, v„listemperatuuri andur
• Manufacturer: ABA

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Kaal (kg): 0,2
• Ühenduste arv: 4
• Välisläbimõõt [mm]: 20
• Pistikuteostus-ID: 4
• Värv: sinine
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• vajaminev tükihulk: 1
• Üldine informatsioon: temperature sensor; blue; 4 pins
• Manufacturer: VIKA

• Kaal (kg): 0,02
• Ühenduste arv: 4
• Välisläbimõõt [mm]: 20
• Pistikuteostus-ID: 4
• Värv: roheline
• vajaminev tükihulk: 1
• Üldine informatsioon: temperature sensor; green; 4 pins
• Manufacturer: VIKA

• Pistikukatte kuju: ovaalne
• Seerianumber: ECP-AU-026
• Manufacturer: NTY

• Vehicle Identification Number (VIN) to: 6K-X-448600
• Temperature range to [°C]: 150
• Colour: green
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: koos klambriga
• Garantii: 3 aastat garantii
• Kaal (kg): 0,1
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV550

• Pinge [V]: 12
• Sõidukivarustus: Lülitusülekandega sõidukile
• Pistikkontaktide arv: 3
• Üldine informatsioon: distance sensor
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: ******6K*X*448600
• Temperature range to [°C]: 150
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Weight [kg]: 0.2
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: ******6K*X*448600
• Temperature range to [°C]: 150
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: green
• Weight [kg]: 0.2
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Name: SW 30 93 1539
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• OE-numbri jaoks: 1H0 919 149 C
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Pistikkontaktide arv: 3
• Pistikukatte kuju: D-kuju
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Equipment: for vehicles with gearshift linkage
• for PR number: 0G3
• Connector Shape: oval
• Number of pins: 3
• Name: ANDUR,VAHEMAA
• Manufacturer: MAX

• Üldine informatsioon: Transmission speed sensor
• Manufacturer: VIKA

• Engine Code: ASV
• Vehicle Identification Number (VIN) to: ******6K*X*448600
• Vastab originaalosa värvile: sinine
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: ASV
• Vehicle Identification Number (VIN) to: ******6K*X*448600
• Corresponds to the original part in colour: blue
• Manufacturer: FACET

• Anduritüüp: Induktiivandur
• Takistus [oom]: 540
• Pistikkontaktide arv: 3
• Kaablipikkus (mm): 1 000
• Üldine informatsioon: distance sensor
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 6K-1-210001
• Number of pins: 3
• Name: Andur,vahemaa
• Manufacturer: MAX

• Vehicle Equipment: for vehicles with automatic climate control
• Number of connectors: 2
• Weight [kg]: 0.005
• for OE number: 1H0 907 543 A
• Name: ANDUR,SALONGITEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Välisläbimõõt [mm]: 20
• Kaal (kg): 0,02
• Ühenduste arv: 4
• Värv: must
• vajaminev tükihulk: 1
• Üldine informatsioon: Coolant temperature sensor; 4 pin; black
• Manufacturer: BORSEHUNG

• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 3
• Üldine informatsioon: distance sensor
• Manufacturer: VIKA

• Vehicle Equipment: for vehicles with automatic climate control
• Number of pins: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Välisläbimõõt [mm]: 20
• Kaal (kg): 0,02
• Ühenduste arv: 4
• Värv: roheline
• vajaminev tükihulk: 1
• Üldine informatsioon: Coolant temperature sensor; 4 pin; green
• Manufacturer: BORSEHUNG

Manufacturer: NRF

• Vehicle Identification Number (VIN) from: ******6K*1*210001
• Number of connectors: 3
• Weight [kg]: 0.024
• for OE number: 191 919 149 E
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Korpusetüüp: Alumiiniumkorpus
• Kõrgus (mm): 82
• Piirangutega toode/piirangu info: koos tihendiga
• Installatsiooni sügavus (mm): 54
• Seerianumber: EPO-AU-000
• Manufacturer: NTY
• Name: NTY EPO-AU-000

• Vehicle Equipment: for vehicles with gearshift linkage
• for PR number: 0G3
• Number of connectors: 3
• Connector Shape: oval
• Name: SW 30 94 8296
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Identification Number (VIN) from: ******6K*Y*021001
• Length [mm]: 535
• Number of connectors: 3
• Cable Length [mm]: 450
• Weight [kg]: 0.1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 6K-Y-021 001
• for OE number: 038 957 147 C
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: MAX
• Lisainfo: 1J0907660B
• Additional information: 1J0907660B

• Engine Code: ASV
• Vehicle Identification Number (VIN) from: 6K-Y-021001
• Pikkus (mm): 535
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Engine Code: ASV
• Vehicle Identification Number (VIN) from: 6K-Y-021001
• Length [mm]: 535
• Manufacturer: FACET

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 3
• Height [mm]: 83
• Fitting Depth [mm]: 52
• for OE number: 1J0907660B
• Name: Andur,Mootoriolitase
• Manufacturer: MD

• Vehicle Identification Number (VIN) from: 6K-Y-021 001
• Kaablipikkus (mm): 500
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 46
• Takistus [koom]: 1,1
• Manufacturer: ERA

• for manufacturer number: 1040015
• Manufacturer: KAMOKA

• Engine Code: ASV
• Vehicle Identification Number (VIN) from: 6K-Y-021001
• Pikkus (mm): 545
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Vehicle Identification Number (VIN) from: 6K-1-210001
• Resistor [Ohm]: 540
• Cable Length [mm]: 1,000
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: ******6K*X*499999
• Transmission Type: 4-Speed Automatic Transmission
• Number of connectors: 7
• Weight [kg]: 0.12
• Name: LšLITI,KŽIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 6K-X-499 999
• Transmission Type: 4-Speed Automatic Transmission
• Number of pins: 7
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ASV
• Sensor Length [mm]: 63.7
• Manufacturer: FACET

• Engine Code: ASV
• Pikkus, mõõteandur [mm]: 63,7
• Manufacturer: EPS

• Number of connectors: 3
• Weight [kg]: 0.1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.