Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Height [mm]: 8
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 30
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 25 tk
- Additional information: PAKENDIS 25 tk
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 30
- Height [mm]: 8
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Siseläbimõõt [mm]: 48
- Välisläbimõõt [mm]: 62
- Kõrgus (mm): 7
-
Seerianumber: NUP-
VW- 032 - Manufacturer: NTY
- Fitting Position: Centre
- Inner Diameter [mm]: 18
- Thickness [mm]: 8
- Outer Diameter [mm]: 30
- Weight [kg]: 0.011
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 5-
Speed Manual Transmission - Seal Material: Paper
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Transmission Type: 5-
Speed Manual Transmission -
Fitting Position: Left,
Right -
Thickness [mm]: 7,
6.5 - Inner Diameter [mm]: 48
- Weight [kg]: 0.02
-
Name: VOLLI RONGASTIHEND,
MANUAALK.KASTI FLANTS - Manufacturer: FEB
- Additional information: FE15263
- Lisainfo: FE15263
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 020 311 108 A
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 14
- Manufacturer: TRUCKTEC
- Üldine informatsioon: radial shaft seal
- Manufacturer: VIKA
- Käigukasti liik: Käigukast
- Manufacturer: 3RG
-
Kaal (kg): 0,
02 -
Siseläbimõõt [mm]: 21,
8 - Välisläbimõõt [mm]: 35
-
Materjal: ACM
( (Polyacryl- Kautschuk) - Jämedus/Tugevus (mm): 7
- Üldine informatsioon: radial shaft seal
- Manufacturer: VIKA
-
Transmission Code: APW,
ATH, DFS, DFV - Inner Diameter 1 [mm]: 8
- Outer Diameter 1 [mm]: 14
- Height 1 [mm]: 4
-
Material: FPM
(fluoride rubber) -
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: COT
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 14
- Height [mm]: 4
- Radial Shaft Seal Design: B
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: without dust lip
- Manufacturer: ELRING
- Quantity per packing unit: 5
- Outer Diameter [mm]: 40
- Height [mm]: 8
- Inner Diameter [mm]: 21.9
- Weight [kg]: 0.022
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 30
- Height [mm]: 7
- Radial Shaft Seal Design: AS
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Inner Diameter [mm]: 21.9
- Outer Diameter [mm]: 40
- Height [mm]: 8
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist -
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Name: Rongastihend
- Manufacturer: ELR
- Fitting Position: Inlet
-
Transmission Code: APW,
ATH, DFS, DFV - Outer Diameter 1 [mm]: 40
- Height 1 [mm]: 8
-
Material: ACM
(Polyacrylate) -
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Inner Diameter 1 [mm]: 21.9
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: COT
- General Information: radial shaft seal
- Manufacturer: BORSEHUNG
-
Engine Code: ABS,
ADZ -
Transmission ID: APW/
ATH/ DFS, APW/ ATH/ DFS/ DFV - Block Separation:
- Thickness [mm]: 8
- Inner Diameter [mm]: 21.9
- Outer Diameter [mm]: 40
-
Material: ACM
(Polyacrylate) - Weight [kg]: 0.015
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 14
- Height [mm]: 4
-
Radial Shaft Seal Design: A/
B -
Material: FPM
(fluoride rubber) - Dust Cover: without dust lip
- Name: Rongastihend
- Manufacturer: ELR
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 24
- Height [mm]: 6.5
- Radial Shaft Seal Design: ASW OF
-
Material: HNBR
(hydrogenated nitrile butadiene rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Additional information: 886.780 ELRING
- Lisainfo: 886.780 ELRING
-
Transmission Type: 5-
Speed Manual Transmission -
Transmission ID: 2Y/
AMC/ CHE/ DGD - Thickness [mm]: 8
- Inner Diameter [mm]: 23.9
- Outer Diameter [mm]: 40
-
Material: ACM
(Polyacrylate) - Weight [kg]: 0.01
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Code: APW,
ATH, DFS, DFV - Inner Diameter 1 [mm]: 18
- Outer Diameter 1 [mm]: 30
- Height 1 [mm]: 6.4
- Height 2 [mm]: 8
- Dust Cover: with dust lip
-
Material: NBR
(nitrile butadiene rubber) -
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: COT
- Seal Material: Paper
-
Name: TIHEND,
KIGUKAST - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Weight [kg]: 0.195
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks