Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Transmission Code: AG4
- Filter type: Filter Insert
- Width [mm]: 158
- Height [mm]: 32
- Sealing Ring Diameter [mm]: 34
- Manufacturer: DELLO AUTOMEGA
-
Transmission Type: 4-
Speed Automatic Transmission - Filter type: Filter Insert
-
Transmission Code: 095,
096, 097, AG4 - Manufacturer: JP GROUP
-
Lisainfo: Hydraulic filter,
gearbox -
Additional information: Hydraulic filter,
gearbox
-
Engine Code: ABS,
ACC - Block Separation:
- Transmission ID: CLA
-
Transmission Type: 4-
Speed Automatic Transmission - Filter type: Filter Insert
- Supplementary Article/Supplementary Info: with seal
- Supplementary Article/Info 2: with oil sump gasket
- Width [mm]: 157
- Height [mm]: 32
- Sealing Ring Diameter [mm]: 34
-
Transmission Code: AG4,
JF404E - Manufacturer: KAMOKA FILTRY
- Transmission Code: 01M
-
Supplementary Article/Supplementary Info: without gasket/
seal - See accessories list for additionally required parts:
-
Transmission Type: 4-
Speed Automatic Transmission - Weight [kg]: 0.382
- Filter type: Filter Insert
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Filtritüüp: Filtrer
- Üldine informatsioon: gearbox oil filter
- Manufacturer: VIKA
- Transmission ID: AG4;095;096;097
-
Transmission Type: 4-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with seal
- Manufacturer Restriction: VW
- Quantity Unit: Set
-
Transmission Code: AG4,
097, 096, 095 - Supplementary Article/Info 2: without fastening material
-
Name: Hdraulikafiltrikomplekt,
automaatkigukast - Manufacturer: MAX
-
Transmission Type: 4-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: without gasket/
seal -
Transmission Code: 095,
096, 097, AG4 - Filter type: Filter Insert
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: MEY
- Filtritüüp: Sõelfilter
- Manufacturer: JAPKO
- Transmission Code: AG4
- Filtritüüp: Imifilter
- Pikkus (mm): 196
- Laius (mm): 158
- Kõrgus (mm): 34
- Siseläbimõõt [mm]: 25
- Piirangutega toode/piirangu info 2: õlivannitihendiga
- Manufacturer: DENCKERMANN FILTRY
- Transmission ID: AG4
-
Transmission Type: 4-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with seal
- Manufacturer Restriction: VW
- Quantity Unit: Set
- Transmission Code: AG4
- Supplementary Article/Info 2: without fastening material
- Number of mounting bores: 4
-
Name: Hdraulikafilter,
automaatkigukast - Manufacturer: MAX
-
Kaal (kg): 0,
2 - Manufacturer: METALCAUCHO
- Filter type: Filter Insert
- Supplementary Article/Info 2: with oil sump gasket
- Height [mm]: 35
- Width 1 [mm]: 196
- Width 2 [mm]: 157
- Inner Diameter [mm]: 25
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: ALC
-
Transmission ID: AG4,
095, 096, 097 -
Transmission Type: 4-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with seal
- Manufacturer Restriction: VW
-
Transmission Code: AG4,
097, 096, 095 -
Name: HDRAULIKAFILTRIKOMPLEKT,
AUTOMAATKIGUKAST - Manufacturer: MEY
- Filtritüüp: Sõelfilter
- Manufacturer: JAPKO
- Kastitüüp: AG4
- Piirangutega toode/piirangu info: koos tihendiga
- tootekoodile: 000 277 26 95
- Garantii: 3 aastat garantii
- Manufacturer: AT AUTOTEILE GERMANY
Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Filtritüüp: Filtrer
-
Kastitüüp: 01M,
01N, AG4 - Käigukasti liik: automaatkast 4 käiku
- Piirangutega toode/piirangu info: koos tihenditega
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Transmission ID: AG4
-
Transmission Type: 4-
Speed Automatic Transmission - Supplementary Article/Supplementary Info: with seal
- Manufacturer Restriction: VW
- Transmission Code: AG4
- Number of mounting bores: 4
-
Name: HDRAULIKAFILTRIKOMPLEKT,
AUTOMAATKIGUKAST - Manufacturer: MEY
- Transmission Code: AG4
- Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Supplementary Article/Info 2: with oil sump gasket
- Length [mm]: 196
- Width [mm]: 158
- Height [mm]: 34
- Inner Diameter [mm]: 25
- SVHC: No SVHC present!
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: MAN
- Transmission ID: 01M
- Filter type: Filter Insert
- Length [mm]: 15.5
- Width [mm]: 158
- Height [mm]: 32.1
- Inner Diameter 2 [mm]: 34
- Transmission Code: 01M
- Supplementary Article/Supplementary Info: with seal
- Gasket Design: Fibre Composite
- Number of Holes: 4
-
Recommended change interval [km]: 60,
000 - Packaging length [cm]: 19.7
- Packaging height [cm]: 23.3
- Net Weight [g]: 232
- Packaging width [cm]: 4.8
- Name: KN HX147KIT1
- Manufacturer: KNECHT
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
- Filter type: Filter Insert
- Length [mm]: 195.5
- Width [mm]: 158
- Height [mm]: 35.1
- Inner Diameter 2 [mm]: 34
- Transmission Code: AG4
- Supplementary Article/Supplementary Info: with seal
- Gasket Design: Fibre Composite
- Number of Holes: 5
-
Recommended change interval [km]: 60,
000 - Packaging length [cm]: 19.7
- Packaging height [cm]: 23.3
- Net Weight [g]: 232
- Packaging width [cm]: 4.6
- Name: KN HX147KIT
- Manufacturer: KNECHT
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
- Filter type: Filter Insert
- Length [mm]: 195.5
- Width [mm]: 158
- Height [mm]: 35.1
- Inner Diameter 2 [mm]: 34
- Transmission Code: AG4
- Supplementary Article/Supplementary Info: with seal
- Gasket Design: Fibre Composite
- Number of Holes: 5
-
Recommended change interval [km]: 60,
000 - Packaging length [cm]: 19.7
- Packaging height [cm]: 23.3
- Net Weight [g]: 232
- Packaging width [cm]: 4.6
- Manufacturer: MAHLE KNECHT
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
-
Transmission Type: 4-
Speed Automatic Transmission -
Cooling Type: Water-
cooled - Housing material: Aluminium
-
Supplementary Article/Supplementary Info: without gaskets/
seals - New Part:
- Used part return not required:
- Consult accessories list for recommended additional repairs:
- Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Supplementary Article/Info 2: without seal ring
-
Cooling Type: Water-
cooled - Width [mm]: 90
- Height [mm]: 55
- Number of ribs: 8
- Core Depth [mm]: 188
-
Name: OLIRADIAATOR,
MOOTORIOLI - Manufacturer: MAX
- Core Length [mm]: 191
- Core Width [mm]: 88
- Core Depth [mm]: 39
- Cooling fins material: Aluminium
- Inlet Ø [mm]: 16
- Outlet Ø [mm]: 16
- Weight [kg]: 0.78
- Packaging length [cm]: 21
- Packaging width [cm]: 12
- Packaging height [cm]: 11
-
for OE number: 096409061D,
096409061F, 096409061G, 096409061H - Manufacturer: AKSDASIS
- Core Length [mm]: 188
- Core Width [mm]: 88
- Core Depth [mm]: 57
- Radiator type: Brazed cooling fins
-
Transmission Type: 4-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: with gaskets/
seals - Packaging width [cm]: 11.2
- Packaging height [cm]: 12
- Packaging length [cm]: 21.5
- Net Weight [g]: 779
- Name: MH CLC177000S
- Manufacturer: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.