• Switch pressure from [bar]: 0.55
• Switch pressure to [bar]: 0.85
• Colour Coding: brown
• Number of connectors: 1
• External Thread [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Engine Code: BPX
• Colour Coding: grey
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge, 2 pins
• Additional information: Sender for water temperature gauge, 2 pins

• Engine Code: BPX
• Pressure [bar]: 1
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO

• Quantity: 1
• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• Weight [kg]: 0.031
• Required quantity: 1
• External Thread [mm]: M10 x 1
• Number of connectors: 1
• Spanner Size: 22
• Supplementary Article/Info 2: with seal ring
• Colour Coding: brown
• General Information: oil pressure switch
• Manufacturer: VIKA

• Quantity: 1
• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• Weight [kg]: 0.031
• Required quantity: 1
• External Thread [mm]: M10 x 1
• Number of connectors: 1
• Spanner Size: 22
• Supplementary Article/Info 2: with seal ring
• Colour Coding: brown
• General Information: oil pressure switch
• Manufacturer: VIKA

• Connector Shape: D Shape
• Operating Mode: Hydraulic
• Colour Coding: brown
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 0,55 - 0,85
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ECC-AU-004
• Socket colour: brown
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NTY

• for OE number: 95510612500
• Manufacturer: KAMOKA

• Quantity: 1
• Vehicle Identification Number (VIN) from: 6L-6-124 888
• Vehicle Identification Number (VIN) to: 6L-6-124 887
• General Information: temperature sensor
• Manufacturer: VIKA

• Colour Coding: grey
• Fabrication Number: ECT-VW-000
• Manufacturer: NTY
• Name: NTY ECT-VW-000

• Pressure [bar]: 8.5
• Housing Colour: dark-brown
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90017
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Fabrication Number: ECT-AU-005
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Sensor Type: NTC Sensor
• Socket colour: black

• Engine Code: BPX
• Colour: brown
• Pressure to [bar]: 0.85
• Pressure from [bar]: 0.55
• Pressure [bar]: 0.7
• Thread Size: M10x1
• Spanner Size: 24
• Manufacturer: FACET

• Switch Pressure [bar]: 0.7
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Engine Code: BPX
• Colour: brown
• Pressure to [bar]: 0.85
• Pressure from [bar]: 0.55
• Pressure [bar]: 0.7
• Thread Size: M10x1
• Spanner Size: 24
• Name: EP 1.800.132
• Manufacturer: EPS

• Thread Size: M 10x1
• Housing Colour: brown
• Pressure [bar]: 0.7
• Manufacturer: FAE

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 06A919501
• Supplementary Article/Info 2: with mounting parts
• Manufacturer: NRF

• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour Coding: brown
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 11.2005
• Number of pins: 2
• Sensor Type: NTC Sensor
• Connector Shape: D Shape
• Colour: black
• for OE number: 06B905379D
• Manufacturer: DELLO AUTOMEGA

• Thread Size: M 10x1
• Housing Colour: green
• Pressure [bar]: 0.5
• Manufacturer: FAE

• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour Coding: brown
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 91 9018
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: 20 mm
• Number of pins: 2
• Manufacturer: VERNET
• Additional information: WS2607
• Lisainfo: WS2607

• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Number of pins: 3
• Plug Type: Female
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 06A 919 501
• Manufacturer: TRUCKTEC

• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Supplementary Article/Info 2: with clamp holder
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: BPX
• Colour: grey
• for article number: 26.0015K, 7.3278K, 7.7946
• Manufacturer: FACET

• Thread Size: M20
• Number of pins: 2
• Housing Colour: grey
• Connector Shape: oval
• Manufacturer: ERA

• Engine Code: BPX
• Colour: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: EP 1.830.278
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Engine Code: BPX
• Colour: blue
• Operating Mode: Mechanical
• Manufacturer: FACET

• Engine Code: BPX, BUK
• Operating Mode: Mechanical
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Colour: blue
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Switch pressure from [bar]: 0.55
• Switch pressure to [bar]: 0.85
• Thread Size: M10x1
• Corresponds to the original part in colour: brown, black
• Manufacturer: METZGER

• Engine Code: BPX
• Colour: blue
• Operating Mode: Mechanical
• Name: EP 1.810.220
• Manufacturer: EPS

• Housing Colour: grey
• Number of pins: 2
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10278

• Control Range [bar]: 0.55/0.85BAR
• Colour: brown
• General Information: oil pressure switch
• Manufacturer: BORSEHUNG

• General Information: temperature sensor
• Manufacturer: VIKA

• Version: 2
• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: black, grey
• Fitting Depth [mm]: 20
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PT009309331

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV551
• Manufacturer: ESEN SKV

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV552

• Colour Coding: grey
• Corresponds to the original part in colour: black
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Version: IAM
• Article number of recommended accessories: 0899250, 0905513
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: BPX
• Construction Year to: 11.2005
• Manufacturer: FACET

• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: ERA

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Name: SW 30 92 9318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 038 957 147 F
• Length [mm]: 530
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: ECP-AU-013
• Manufacturer: NTY

• Engine Code: BPX
• Construction Year to: 11.2005
• Name: EP 1.994.006
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: D Shape
• Socket colour: black
• Fabrication Number: ECP-AU-000
• Manufacturer: NTY

• Transmission Type: 5-Speed Manual Transmission
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV553
• Manufacturer: ESEN SKV

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Cable Length [mm]: 530
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV486

• for OE number: 1100749
• Cable Length [mm]: 500
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Cable Length [mm]: 530
• Number of connectors: 3
• Housing Colour: black
• Lisainfo: Sensor, crankshaft pulse
• Additional information: Sensor, crankshaft pulse

• Sensor Type: Hall Sensor
• Number of pins: 3
• Length [mm]: 445
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Cable Length [mm]: 450
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV509

• for OE number: 1100748
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• for OE number: 03G 906 433
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

Manufacturer: NRF

• General Information: Transmission speed sensor
• Manufacturer: VIKA

• Cable Length [mm]: 515
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11009
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Sensor Type: Hall Sensor
• Connector Shape: D Shape
• Number of pins: 3
• Cable Length [mm]: 330
• for OE number: 038957147G
• Manufacturer: DELLO AUTOMEGA

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Length [mm]: 340
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV365
• Manufacturer: ESEN SKV

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: D Shape
• Number of pins: 3
• Cable Length [mm]: 410
• Manufacturer: NRF

• Resistor [Ohm]: 500
• Cable Length [mm]: 530
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009167251

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Info 2: with cable
• Length [mm]: 445
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

Manufacturer: MAGNETI MARELLI

• Quantity: 1
• Weight [kg]: 0.04
• Number of connectors: 3
• Required quantity: 1
• General Information: hall sender camshaft
• Manufacturer: VIKA

• Supplementary Article/Info 2: with cable
• Length [mm]: 530
• Height [mm]: 46
• Resistor [Ohm]: 190
• Number of connectors: 3
• Manufacturer: VERNET

• Cable Length [mm]: 500
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 46
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.076
• Alternative Repair Kit: 550102
• Manufacturer: ERA

• Length [mm]: 245
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS10964
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Length [mm]: 530
• Number of connectors: 3
• Cable Length [mm]: 500
• Weight [kg]: 0.09
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BPX
• Length [mm]: 530
• Manufacturer: FACET

• Cable Length [mm]: 530
• Number of pins: 3
• Manufacturer: FAE

• Housing Type: with housing
• Fabrication Number: EPP-AU-001
• Manufacturer: NTY