Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Protective Cap/
Bellow, shock absorber -
Additional information: Protective Cap/
Bellow, shock absorber
- Fitting Position: Front Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Weight [kg]: 3.9
- Bore Diameter [mm]: 27
- Piston Rod Diameter [mm]: 20
-
Article number of recommended accessories: MK067,
PK001 - Packaging length [cm]: 51.5
- Packaging width [cm]: 16.2
- Packaging height [cm]: 16.2
- Manufacturer: MONROE
- Lisainfo: 11250 MON
- Additional information: 11250 MON
Guarantee: 5 years guarantee with accessories when replaced in pairs
- Suspension: for vehicles with bad road version
- Fitting Position: Rear Axle
- Material: Thermoplast
- Height [mm]: 90
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 6N0513425A
- Fitting Position: Rear Axle
- Material: Plastic
- Weight [g]: 31
- Name: IM 37454
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Bellows Material: Thermoplast
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Production date from: 04/
00 - Mounting Type: Rubber Mount
- Fitting Position: Front Axle
- Height [mm]: 206
- for OE number: 6N0413175A
- Manufacturer: SASIC
- Quantity: 2
-
Vehicle Identification Number (VIN) from: 6K-
X- 463 223 -
Vehicle Identification Number (VIN) to: 6K-
X- 463 222 - Fitting Position: Front Axle
- Weight [kg]: 0.07
- Material: Thermoplast
- Required quantity: 2
-
Outer Diameter [mm]: 68,
80 - General Information: protective pipe; front
- Manufacturer: VIKA
- for OE number: 6N0413175A
- Fitting Position: Front Axle
- Height [mm]: 193
- Material: Thermoplast
- Weight [g]: 68
- Diameter 1 [mm]: 63.6
- Diameter 2 [mm]: 74
- Name: IM 37485
- Manufacturer: ORIGINAL IMPERIUM
- Height [mm]: 198
- Inner Diameter 1 [mm]: 63
- Weight [kg]: 0.07
- Required quantity: 2
- Fitting Position: Front Axle
- Inner Diameter 2 [mm]: 72
- Manufacturer: TEDGUM
-
Outer Diameter [mm]: 68,
80 - Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.07
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Outer Diameter [mm]: 68,
80 - Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.07
- Name: SW 30 93 6006
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Weight [kg]: 0.108
- Packaging length [cm]: 19
- Packaging width [cm]: 7.8
- Packaging height [cm]: 7.8
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: without spring seat
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: without spring seat
- Shock Absorber Type: Oil Pressure
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Design: Suspension Strut
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Manufacturer: DENCKERMANN AMORTYZATORY
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Type: Oil Pressure
-
Shock Absorber System: Twin-
Tube - Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Thread Size: M10x1
- Piston Rod Length [mm]: 275
- Piston Rod Diameter [mm]: 12.5
- Suspension Strut Outer Diameter [mm]: 38
- Manufacturer: OPTIMAL ZAWIESZENIE
Shock Absorber Design: Suspension Strut Insert, Suspension Strut, Spring-bearing Damper
- Fitting Position: Front Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Design: Suspension Strut
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
-
Shock Absorber System: Twin-
Tube - Manufacturer: DENCKERMANN AMORTYZATORY
for OE number: 191 413 031 H, 1H0 413 031 A, 6K0 413 031, 6K0 413 031 A
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: without spring seat
- Shock Absorber Type: Oil Pressure
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Design: Suspension Strut
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
-
Shock Absorber System: Twin-
Tube - Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Manufacturer: KAMOKA AMORTYZATORY
- Additional information: 2000198 KAMOKA
- Lisainfo: 2000198 KAMOKA
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
-
Lisainfo: Suspension strut,
complete, front -
Additional information: Suspension strut,
complete, front
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Manufacturer: JP GROUP
- Lisainfo: Shock Absorber
- Additional information: Shock Absorber
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Front Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Manufacturer: KAMOKA AMORTYZATORY
- Additional information: 2001047 KAMOKA
- Lisainfo: 2001047 KAMOKA
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
-
Shock Absorber System: Twin-
Tube - Manufacturer: DENCKERMANN AMORTYZATORY
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Check OE number:
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Type: Oil Pressure
-
Shock Absorber System: Twin-
Tube - Parameter: SXOV26X189A
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
-
Name: Gas shock absorber left,
right - Quality class: PJ
Lisainfo: "Tootja: MAGNETI MARELLI
VW POLO H/B, 10.94-
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Design: Spring-
bearing Damper -
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Weight [kg]: 1.9
- Bore Diameter [mm]: 25
- Length 1 [mm]: 367
- Length 2 [mm]: 549
- Piston Rod Diameter [mm]: 11
-
Article number of recommended accessories: MK133,
PK049 - Packaging length [cm]: 67.4
- Packaging width [cm]: 12.5
- Packaging height [cm]: 12.7
- Manufacturer: MONROE
Guarantee: 5 years guarantee with accessories when replaced in pairs
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Check OE number:
-
Parameter: SF30/
20X170A - Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Manufacturer: SACHS
for OE number: 191 413 031 H, 1H0 413 031 A, 6K0 413 031, 6K0 413 031 A SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Check OE number:
-
Parameter: SF30/
20X165A - Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Manufacturer: SACHS
for OE number: 6K0 413 031 F, 6N0 413 031 H, 6N0 413 031 J, 6N0 413 031 K SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Check OE number:
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Parameter: SEOV27X171A
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Quantity per packing unit: 2
- Quantity per axle: 1
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 50
-
Thread Size: M14x1,
5 - Length 1 [mm]: 532
- Length 2 [mm]: 365
- Piston Rod Diameter [mm]: 22
- Observe technical data:
- Manufacturer: TRW AMORTYZATORY
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Check OE number:
-
Parameter: SFE30/
20X167A - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Name: shock absorber
- Quality class: Q
Lisainfo: "Tootja: BILSTEIN
SEAT IBIZA/CORDOBA
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Check OE number:
-
Parameter: SFE32/
22X155A - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - reinforced version:
- Shock Absorber Mounting Type: Top pin
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Name: Gas shock absorber
- Quality class: PJ
Lisainfo: "Tootja: MAGNETI MARELLI
VW GOLFIII/VENTO 94-
(kvaliteediklass: Q)"
- Name: Oil shock absorber
- Quality class: Q
Lisainfo: "Tootja: BILSTEIN
SEAT/VW 00-
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks