Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Vehicle Equipment: for vehicles without power steering
- Alternatively:
- Manufacturer: JP GROUP
- Lisainfo: Steering gear protection boot
- Additional information: Steering gear protection boot
- Vehicle Equipment: for vehicles without power steering
- Fitting Position: both sides
- Quantity per axle: 2
- Bellows Material: Rubber
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 39
- Height [mm]: 126
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: both sides
- Vehicle Equipment: for vehicles with power steering
-
for steering manufacturer: TRW /
XTR- USA - Quantity per axle: 2
- Bellows Material: Rubber
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 41
- Height [mm]: 210
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle,
both sides - Vehicle Equipment: for vehicles without power steering
- Weight [kg]: 0.163
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Equipment: for vehicles with power steering
- Fitting Position: Front Axle both sides
- Length [mm]: 210
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 41
- Manufacturer: JPN
-
Fitting Position: Front Axle Left,
Front Axle Right - Material: Rubber
- Length [mm]: 210
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 41
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front Axle both sides
- Height [mm]: 210
- Weight [kg]: 0.15
- Weight [g]: 150
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 42
- Manufacturer: METALCAUCHO
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without power steering
- Length [mm]: 126
- Material: Rubber
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 39
- Weight [kg]: 0.11
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 191419831
- Fitting Position: Front Axle
- Material: Rubber
- Vehicle Equipment: for vehicles without power steering
- Weight [g]: 105
- Length [mm]: 120
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 41
- Name: IM 32290
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without power steering
- Length [mm]: 126
- Material: Rubber
- Inner Diameter 1 [mm]: 25
- Weight [kg]: 0.11
- Inner Diameter 2 [mm]: 39
- Name: SW 30 80 0054
- Manufacturer: SWAG
- Lisainfo: 30 80 0054 SWA
- Additional information: 30 80 0054 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles with power steering
- Length [mm]: 210
- Material: Rubber
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 10
- Weight [kg]: 0.128
- Inner Diameter 2 [mm]: 41
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles with power steering
- Length [mm]: 210
- Material: Rubber
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 10
- Weight [kg]: 0.128
- Inner Diameter 2 [mm]: 41
- Name: SW 30 80 0057
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Production date from: 10/
99 - Fitting Position: Front Axle
- for OE number: 1H0422831B
- Manufacturer: SASIC
- Vehicle Equipment: for vehicles with power steering
- Length [mm]: 210
- Material: Rubber
- Supplementary Article/Info 2: with clamps
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 41
- Weight [kg]: 0.2
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right, Front Axle - Vehicle Equipment: for vehicles without power steering
- Material: Rubber
- Length [mm]: 120
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 41
- paired article number: 30117 01
- Manufacturer: LEMFORDER
- Name: LMI 3011201
SVHC: No information available, please contact the manufacturer!
- Vehicle Equipment: for vehicles with power steering
-
Fitting Position: Front Axle,
outer - Material: Rubber
- Length [mm]: 210
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 41
- Manufacturer: LEMFORDER
- Name: LMI 3011101
SVHC: No information available, please contact the manufacturer!
- Vehicle Equipment: for vehicles with power steering
- Length [mm]: 210
- Material: Rubber
- Supplementary Article/Info 2: with clamps
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 10
- Weight [kg]: 0.2
- Inner Diameter 2 [mm]: 41
- Observe service information:
- Name: SW 30 80 0066
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.18
- Weight [g]: 180
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 42
- Manufacturer: METALCAUCHO
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without power steering
- Length [mm]: 126
- Material: Rubber
- Supplementary Article/Supplementary Info: with grease
- Supplementary Article/Info 2: with clamps
- Inner Diameter 1 [mm]: 25
- Weight [kg]: 0.26
- Inner Diameter 2 [mm]: 39
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without power steering
- Length [mm]: 126
- Material: Rubber
- Supplementary Article/Supplementary Info: with grease
- Supplementary Article/Info 2: with clamps
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 39
- Weight [kg]: 0.26
- Name: SW 30 80 0063
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without power steering
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 41
- Material: Rubber
- Length [mm]: 120
- SVHC: No SVHC present!
- Manufacturer: FAG
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without power steering
- Material: Rubber
- Supplementary Article/Info 2: with clamps
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 39
- Overall Length [mm]: 126
- Quantity Unit: Set
- Manufacturer: OPTIMAL ZAWIESZENIE
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 210
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 41
- Supplementary Article/Supplementary Info: with accessories
- Vehicle Equipment: for vehicles with power steering
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEYLE
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 42
- Height [mm]: 119
-
Fitting Position: Front Axle Right,
Front Axle Left - Full Set:
-
Name: SE D9-
007C - Manufacturer: AUTOFREN SEINSA
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.35
- Weight [g]: 350
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 42
- Manufacturer: METALCAUCHO
- Inner Diameter 1 [mm]: 12
- Inner Diameter 2 [mm]: 46
- Height [mm]: 185
-
Fitting Position: Front Axle Right,
Front Axle Left - Full Set:
-
Name: SE D9-
056C - Manufacturer: AUTOFREN SEINSA
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles with power steering
- Height [mm]: 210
- Inner Diameter 1 [mm]: 10
- Inner Diameter 2 [mm]: 41
- Name: SK VKJP2013
- Manufacturer: SKF
- Material: Rubber
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 185
-
Inner Diameter 1 [mm]: 30,
37, 42, 50, 55 - Weight [kg]: 0.14
-
Inner Diameter 2 [mm]: 11,
22, 30, 42 - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 48
- Material: Rubber
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 205
-
Inner Diameter 1 [mm]: 11,
18, 26, 38, 45 -
Inner Diameter 2 [mm]: 36,
44, 50, 57 - Weight [kg]: 0.14
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles with power steering
- Quantity per packing unit: 2
- Manufacturer Restriction: TRW
- Supplementary Article/Supplementary Info: with accessories
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 211.7
- Inner Diameter 1 [mm]: 12
- Inner Diameter 2 [mm]: 44
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks