Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 35
- Dust Cover: with dust lip
-
Swirl Type: Left-
hand Twist - Thickness [mm]: 7
- Manufacturer: DELLO AUTOMEGA
-
Transmission Type: 5-
Speed Manual Transmission - Vehicle Equipment: for vehicles with manual transmission
- Outer Diameter [mm]: 35
- Thickness [mm]: 7
- Inner Diameter [mm]: 21.8
- Weight [kg]: 0.012
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 5-
Speed Manual Transmission - Inner Diameter [mm]: 15
- Outer Diameter [mm]: 24
- Height [mm]: 6
-
Material: ACM
(Polyacrylate) - Manufacturer: TOPRAN
- Lisainfo: 100 355 HP
- Additional information: 100 355 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Height [mm]: 7
- Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Weight [kg]: 0.02
-
Thickness [mm]: 7,
6.5 - General Information: shaft oil seal; 48x62x7MM
- Manufacturer: VIKA
-
Transmission Type: 5-
Speed Manual Transmission - Fitting Position: Right
-
Thickness [mm]: 7,
6.5 - Inner Diameter [mm]: 48
- Weight [kg]: 0.02
- Manufacturer: FEBI BILSTEIN
- Additional information: FE15263
- Lisainfo: FE15263
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 10
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 65
- General Information: shaft oil seal; 50x65x10MM
- Manufacturer: VIKA
-
Transmission Type: 5-
Speed Manual Transmission - Vehicle Equipment: for vehicles with manual transmission
- Thickness [mm]: 6
- Outer Diameter [mm]: 24
- Inner Diameter [mm]: 15
- Weight [kg]: 0.009
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- General Information: radial shaft seal
- Manufacturer: VIKA
- Thickness [mm]: 7
- Inner Diameter [mm]: 21.8
- Outer Diameter [mm]: 35
-
Material: ACM
(Polyacrylate) - Weight [kg]: 0.02
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height 1 [mm]: 6
- Outer Diameter 1 [mm]: 24
- Inner Diameter 1 [mm]: 15
-
Material: HNBR
(hydrogenated nitrile butadiene rubber) - Manufacturer: CORTECO
- Name: CO 01030118
- Required quantity: 2
- Thickness [mm]: 10
- for OE number: 068 103 085 E
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Weight [kg]: 0.023
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Inlet
- Transmission Code: EDT
- Height 1 [mm]: 7
- Outer Diameter 1 [mm]: 35
- Inner Diameter 1 [mm]: 21.8
-
Material: ACM
(Polyacrylate) -
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Manufacturer: CORTECO
- Name: CO 12015554
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 24
- Height [mm]: 6.5
- Radial Shaft Seal Design: ASW OF
-
Material: HNBR
(hydrogenated nitrile butadiene rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Additional information: 886.780 ELRING
- Lisainfo: 886.780 ELRING
- Thickness [mm]: 7
- Inner Diameter [mm]: 57
- Outer Diameter [mm]: 71
-
Material: ACM
(Polyacrylate) - Fitting Position: Left
- Weight [kg]: 0.02
- Manufacturer: FEBI BILSTEIN
Transmission ID: CWL/CWM/CWP/CWU/DCA, DCE/DCJ/DCK/DXB/DXK, DXN/EKY/EQV/ERA/ERC, EKY/FFC/FFH/FFN/FFX, FJA/FFK General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 7
- Inner Diameter [mm]: 57
- Outer Diameter [mm]: 71
-
Material: ACM
(Polyacrylate) - Fitting Position: Left
- Weight [kg]: 0.02
- Name: SW 30 91 5287
- Manufacturer: SWAG
Transmission ID: CWL/CWM/CWP/CWU/DCA, DCE/DCJ/DCK/DXB/DXK, DXN/EKY/EQV/ERA/ERC, EKY/FFC/FFH/FFN/FFX, FJA/FFK General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 5-
Speed Manual Transmission -
Transmission ID: CHE/
CRY/ DFQ/ DGE - Thickness [mm]: 8
- Inner Diameter [mm]: 23.9
- Outer Diameter [mm]: 40
-
Material: ACM
(Polyacrylate) - Weight [kg]: 0.01
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 21.8
- Outer Diameter [mm]: 35
- Height [mm]: 7
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist -
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Housing material: Sheet Steel
- Supplementary Article/Info 2: with shaft seal
-
Sealing lip material: ACM
(Polyacrylate) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Inlet
- Transmission Code: EDT
- Supplementary Article/Info 2: with shaft seal
- Height 1 [mm]: 49.1
- Outer Diameter 1 [mm]: 31
- Outer Diameter 2 [mm]: 47
- Inner Diameter 1 [mm]: 21.8
-
Material: ACM
(Polyacrylate) - Version: Clutch Guide Tube
- Manufacturer: CORTECO
- Name: CO 01036165
- Weight [g]: 77
- Supplementary Article/Info 2: with shaft seal
- Name: IM 41242
- Manufacturer: ORIGINAL IMPERIUM
- Quantity per packing unit: 2
- Quantity: 2
- Quantity Unit: Kit
-
General Information: shaft oil seal
(2pcs/ set) - Manufacturer: BORSEHUNG
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks