• General Information: temperature sensor
• Manufacturer: VIKA

• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: dark grey
• Fitted Diameter [mm]: 25
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 20
• for OE number: 06A919501A
• Manufacturer: MEAT&DORIA

• Engine Code: BXJ
• Colour: grey
• for article number: 26.0015K, 7.3278K, 7.7946
• Manufacturer: FACET

• Engine Code: BXJ
• Colour: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Housing Type: without housing
• Supplementary Article/Info 2: with clip, with seal ring
• Connector Shape: D Shape
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Length [mm]: 20
• Colour Coding: grey
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA111

• Engine Code: BXJ
• for OE number: 038 906 081B, 038906081B
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: black
• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Fitting Position: Fuel Line
• Name: Andur, ktusetemperatuur
• Manufacturer: MD

• Engine Code: BXJ
• for PR number: TW0
• Housing Colour: black
• Manufacturer: FACET

• Engine Code: BXJ
• for PR number: TW0
• Housing Colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Transmission Type: Manual Transmission
• Fabrication Number: ECS-AU-000
• Manufacturer: NTY

• Number of pins: 4
• Manufacturer: JPN

• for OE number: 76 906 433
• Length [mm]: 350
• Fabrication Number: ECP-AU-017
• Manufacturer: NTY

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Length [mm]: 330
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV486
• Manufacturer: ESEN SKV

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE ELEKTRYKA

• General Information: pressure sensor
• Manufacturer: VIKA

• for OE number: 03G 906 433
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Number of pins: 3
• Manufacturer: JPN

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Weight [kg]: 0.04
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pressure to [bar]: 0.1
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of connectors: 3
• Material: Plastic
• for OE number: 07Z 906 051 A
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MAX
• Lisainfo: 21-0323
• Additional information: 21-0323

• Number of connectors: 3
• Material: Plastic
• Manufacturer: JP GROUP

Lisainfo: Pressure difference sender for diesel particulate filter Additional information: Pressure difference sender for diesel particulate filter

• Engine Code: BXJ
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Cable Length [mm]: 320
• Number of connectors: 3
• Housing Colour: grey
• Lisainfo: Sensor, camshaft position
• Additional information: Sensor, camshaft position

• Engine Code: BXJ
• Number of pins: 3
• Connector Shape: D Shape
• Socket colour: grey
• Sensor Type: Hall Sensor
• for OE number: 03G957147
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV336
• Manufacturer: ESEN SKV

• Connector Shape: D Shape
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Supplementary Article/Supplementary Info: with cable protection pipe
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BXJ
• Vehicle Identification Number (VIN) from: 6J-9-000 001
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV781

• for article number: 111420
• General Information: pressure sensor
• Manufacturer: BORSEHUNG

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Socket colour: grey
• Manufacturer: BREMI

• Number of pins: 5
• Voltage [V]: 12
• Fabrication Number: EPP-AU-002
• Manufacturer: NTY

• Supplementary Article/Info 2: with cable
• Length [mm]: 330
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Length [mm]: 245
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 076 906 051 A
• Manufacturer: TRUCKTEC

• Number of pins: 4
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Sensor Type: Hall Sensor
• Cable Length [mm]: 306
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Engine Code: BXJ
• Length [mm]: 320
• Manufacturer: FACET

• Engine Code: BXJ
• Length [mm]: 320
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Length [mm]: 380
• Number of pins: 3
• Cable Length [mm]: 445, 330
• Required quantity: 1
• Sensor Type: Active sensor, Hall Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Connector Shape: D Shape
• Number of mounting bores: 1
• Socket colour: black
• Weight [kg]: 0.06
• for OE number: 045 957 147 A
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Alternatively:
• Number of connectors: 3
• Alternative Repair Kit: 550704
• Manufacturer: ERA

• Engine Code: BXJ
• Fitting Position: Rear
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Supplementary Article/Info 2: without fastening clamp
• Manufacturer: FACET

• Quantity: 1
• Weight [kg]: 0.02
• Material: Plastic
• Number of connectors: 3
• General Information: pressure sensor
• Manufacturer: VIKA

• Number of pins: 3
• Number of connectors: 2
• Quality: OE EQUIVALENT
• for OE number: 076906051A
• Manufacturer: MEAT&DORIA

• Engine Code: BXJ
• Fitting Position: Rear
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Supplementary Article/Info 2: without fastening clamp
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• General Information: pressure difference sender
• Manufacturer: BORSEHUNG

• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.044
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Cross Section [mm²]: 0.75
• Manufacturer Restriction: VAG
• Socket Width [mm]: 2.8
• Number of pins: 3
• Cable Length [mm]: 250
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

• Number of connectors: 4
• Weight [kg]: 0.026
• for OE number: 03G 906 051 D
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BXJ
• Number of pins: 3
• Sensor Type: Hall Sensor
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter, not for vehicles with retrofitted soot/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Pressure from [kPA]: 27
• Manufacturer: DELPHI
• Name: DE PS10118

• Engine Code: BXJ
• Pressure from [kPA]: 11
• Pressure to [kPA]: 254
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Number of pins: 3
• Cable Length [mm]: 315
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Length [mm]: 330
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Housing Colour: grey
• Manufacturer: FAE ELEKTRYKA

Manufacturer: MAGNETI MARELLI

• Length [mm]: 330
• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168091

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: BXJ
• Pressure from [kPA]: 11
• Pressure to [kPA]: 254
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: EPS

• for OE number: 03L 906 088 BS
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: black
• Fabrication Number: EGT-VW-007
• Cable Length [mm]: 610
• Manufacturer: NTY
• Name: NTY EGT-VW-007

• Fabrication Number: EPP-AU-038
• Housing Type: without housing
• Manufacturer: NTY

• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.02
• for OE number: 076 906 051 A
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 350
• Number of connectors: 3
• Cable Length [mm]: 270
• Weight [kg]: 0.035
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 038 906 461 B
• Manufacturer: KAMOKA

• for OE number: 03G 906 088 AC
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: brown
• Fabrication Number: EGT-VW-000
• Cable Length [mm]: 375
• Manufacturer: NTY

• for OE number: 03P 906 088 D
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: Orange
• Fabrication Number: EGT-SK-000
• Cable Length [mm]: 730
• Manufacturer: NTY

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 254
• Manufacturer: FAE

• Length [mm]: 350
• Number of connectors: 3
• Cable Length [mm]: 270
• Weight [kg]: 0.035
• Name: SW 30 93 6115
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 5
• Voltage [V]: 12
• for OE number: 038906461B, 038906461BV, 038906461BX
• Manufacturer: DELLO AUTOMEGA

• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

• Fitting Position: after soot particulate filter
• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• for OE number: 076 906 051 A
• Width [mm]: 50
• Length [mm]: 75
• Guarantee: 3 years guarantee
• Connector Shape: D Shape
• Voltage [V]: 12
• Height [mm]: 35
• Weight [g]: 36
• Housing material: Plastic
• Operating Mode: Electric
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: after soot particulate filter
• General Information: Sold in Hitachi brand: printing and packaging
• Name: HI 2507401
• Manufacturer: HITACHI

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 2
• for OE number: 07Z906051A
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• for OE number: 045 906 088 D
• Voltage [V]: 12
• Width [mm]: 70
• Height [mm]: 20
• Length [mm]: 860
• Weight [g]: 50
• Operating Mode: Electric
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Construction Year to: 06.2009
• Number of pins: 5
• Housing Type: with housing
• Manufacturer: JP GROUP
• Lisainfo: Air meter
• Additional information: Air meter

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 375
• Overall Length [mm]: 540
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Manufacturer: VALEO

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE DPS00002