Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Värvimarkeering: hall
- Pistikkontaktide arv: 2
-
Lisainfo: Sender for water temperature gauge,
2 pins -
Additional information: Sender for water temperature gauge,
2 pins
- Kasutuspinge [V]: 12
-
Lülitamispunkt alates [°C]: 84,
91 -
Lülituspunkt kuni [°C]: 95,
102 - Võtmekaugus: 29
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Värv: must
-
Keermemõõt: M22 x 1,
5 - Pistikkontaktide arv: 3
-
Lisainfo: Thermo switch for fan 95-
84/ 102- 91 C -
Additional information: Thermo switch for fan 95-
84/ 102- 91 C
-
Siseläbimõõt [mm]: 19,
5 -
Jämedus/Tugevus (mm): 3,
5 - Materjal: Kumm
- OE-numbri jaoks: 7198663
- Manufacturer: DELLO AUTOMEGA
-
Siseläbimõõt [mm]: 19,
5 -
Jämedus/Tugevus (mm): 3,
5 -
Kaal (kg): 0,
001 - Manufacturer: VEMO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- OE-numbri jaoks: 95510612500
- Manufacturer: KAMOKA
- Colour Coding: grey
-
Fabrication Number: ECT-
VW- 000 - Manufacturer: NTY
-
Name: NTY ECT-
VW- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Quantity: 1
- Weight [kg]: 0.015
- Number of connectors: 2
- Screw length below head [mm]: 20
- Colour: black
- Colour Coding: grey
- General Information: temperature sensor; black
- Manufacturer: VIKA
- Quantity: 1
- Weight [kg]: 0.015
- Number of connectors: 2
- Screw length below head [mm]: 20
- Colour: grey
- Colour Coding: grey
- General Information: temperature sensor; grey; 2 pins
- Manufacturer: VIKA
- Värvimarkeering: hall
- Pistikkontaktide arv: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
-
Anduritüüp: NTC-
andur - Montaaživiis: klemmitud
-
Pistikukatte kuju: D-
kuju - Pistikkontaktide arv: 2
- OE-numbri jaoks: 06A919501
- Piirangutega toode/piirangu info 2: koos osadega
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals -
Contact surface: Tin-
plated - Socket Width [mm]: 1.5
- Number of pins: 4
- Number of rows: 2
- Manufacturer: ABA
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product. Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur
- Quantity: 1
- Construction Year from: 05.2009
- Construction Year to: 05.2009
- Weight [kg]: 0.06
- Number of connectors: 3
-
Temperature range from [°C]: 95,
102 -
Temperature range to [°C]: 84,
91 - Required quantity: 1
- General Information: thermal switch
- Manufacturer: VIKA
- Keermemõõt: 20 mm
- Pins'ide arv: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: VER
- Additional information: WS2607
- Lisainfo: WS2607
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Number of pins: 3
- Plug Type: Female
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Pistikukatte kuju: kolmnurkne
- OE-numbri jaoks: 1J0 959 481 A
- Pistikkontaktide arv: 3
-
Keermemõõt: M22x1,
5 -
Lülitamispunkt alates [°C]: 95,
102 -
Lülituspunkt kuni [°C]: 84,
91 -
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: MAX
- Pistikukatte kuju: kolmnurkne
- Võtmekaugus: 29
- Manufacturer: KAMOKA
- Supplementary Article/Info 2: with clamp holder
- Number of pins: 2
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: BTS
- Colour: grey
-
for article number: 1.660.015K,
1.830.278K, 1.879.946 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
-
Additional information: 1-
830- 278 -
Lisainfo: 1-
830- 278
- Thread Size: M20
- Number of pins: 2
- Housing Colour: grey
- Connector Shape: oval
- Manufacturer: ERA
- Engine Code: BTS
- Colour: grey
-
tootekoodile: 26.0015K,
7.3278K, 7.7946 - Manufacturer: FACET
- Pistikkontaktide arv: 3
- Pistikukatte kuju: kolmnurkne
- Pistiku värv: must
- Väljalülimispunkt (°C): 97
- Lülituspunkt [°C]: 87
-
Keermemõõt: M22x1,
5 mm - Võtmekaugus: 29 mm
- OE-numbri jaoks: 1J0 959 481A
- Manufacturer: MEAT&DORIA
- Korpusevärv: hall
- Pistikkontaktide arv: 2
- Võtmekaugus: 0
- Manufacturer: DELPHI
- Name: DE TS10278
- Version: 2
-
Pistikukatte kuju: D-
kuju - Materjal: Plastik
- Pistikkontaktide arv: 2
- Pistikute teostus: Female
-
Anduritüüp: NTC-
andur - Manufacturer: NISSENS
Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Montaaživiis: pistetud
- Pinge [V]: 12
- Piirangutega toode/piirangu info: koos tihendiga
- Värv: must
-
Anduritüüp: NTC-
andur - Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: koos turvarõngaga
-
Vastab originaalosa värvile: must,
hall - Installatsiooni sügavus (mm): 20
- Monteerimist/demonteerimist peab tegema spetsialist!:
-
SVHC: 7439-
92- 1; plii -
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: HEL
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.
-
Töötemperatuur alates [°C]: 97,
102 -
Töötemperatuur kuni [°C]: 87,
97 - Keermemõõt: M22x1.5
- Anduritüüp: lahtine anduri ehitusviis
- Manufacturer: VERNET
- Pistikkontaktide arv: 2
-
Kaal (kg): 0,
3 - pakendi pikkus [cm]: 12
- pakendi laius [cm]: 8
- pakendi kõrgus [cm]: 6
- Töötemperatuur alates [°C]: 95
- Töötemperatuur kuni [°C]: 90
- Keermemõõt: M22x1.5
- Anduritüüp: lahtine anduri ehitusviis
- Manufacturer: VERNET
- Quantity: 1
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
- Number of connectors: 2
- Colour Coding: grey
- General Information: coolant temperature sensor
- Manufacturer: BORSEHUNG
- for PR number: TW0
-
Anduritüüp: NTC-
andur - Montaaživiis: Kruviühendus
-
Pistikukatte kuju: D-
kuju - Pistikkontaktide arv: 2
- Pistiku värv: must
- OE-numbri jaoks: 03F919501A
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Engine Code: BTS
- for PR number: TW0
- Housing Colour: black
- Name: EP 1.830.355
- Manufacturer: EPS
- Engine Code: BTS
- for PR number: TW0
- Housing Colour: black
- Manufacturer: FACET
- Version: 1
-
Pistikukatte kuju: D-
kuju - Materjal: Plastik
- Pistikkontaktide arv: 2
- Pistikute teostus: Female
-
Anduritüüp: NTC-
andur - Manufacturer: NISSENS
Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Pistikkontaktide arv: 3
- Pikkus (mm): 29
-
Kõrgus (mm): 54,
6 -
Kaal (kg): 0,
077 -
Keermemõõt: M22x1,
5 - Lülitamispunkt alates [°C]: 102
- Lülituspunkt kuni [°C]: 87
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 3
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Montaaživiis: kruvitud
- Lülitamispunkt alates [°C]: 90
- Lülituspunkt kuni [°C]: 95
- Pinge [V]: 12
- Pistikkontaktide arv: 2
- Pöördeliik: koos meetrilise keermega
-
Keermemõõt: M 22 x 1,
5 - Lüliti funktsioon: Lukustaja
- Võtmekaugus: 29
- Pistikute teostus: Lamepistik
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Name: HE 6ZT007835101
- Manufacturer: HELLA
- Läbimõõt [mm]: 26
- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Vedrukuju: Kinnitusvedru
- Pikkus (mm): 20
- Korpusevärv: sinine
- Kõrgus (mm): 57
-
Kaal (kg): 0,
02 - Värv: hall
- Ühenduste arv: 2
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for model code: 3 Pin
- Keermemõõt: M22*1.5
- Võtmekaugus: S29
- Pistikkontaktide arv: 3
- Pistikukatte kuju: ristkülik
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: DLP
- Pistikkontaktide arv: 2
- Korpusevärv: hall
- Manufacturer: FAE ELEKTRYKA
- Quantity: 1
- Colour: black
- General Information: temperature switch; with gasket
- Manufacturer: BORSEHUNG
- Model Year from: 2009
- Model Year to: 2011
-
Vehicle Identification Number (VIN) from: 6J-
9- 000 001 - Kasutuspinge [V]: 12
-
Lülitamispunkt alates [°C]: 84,
91 -
Lülituspunkt kuni [°C]: 95,
102 - Võtmekaugus: 29
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Värv: must
-
Keermemõõt: M22 x 1,
5 - Pistikkontaktide arv: 3
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: MEY
- Montaaživiis: kruvitud
- Lülitamispunkt alates [°C]: 87
- Lülituspunkt kuni [°C]: 102
- Pinge [V]: 12
- Pistikkontaktide arv: 3
-
Keermemõõt: M 22 x 1,
5 - Lüliti: koos topelt termolülitiga
-
Lüliti funktsioon: Topeltväljund,
Lukustaja - Võtmekaugus: 29
- Pistikute teostus: Lamepistik
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Manufacturer: HELLA
- Name: HE 6ZT007800111
-
Väliskeerme mõõde: M22 x 1,
5 - Ühenduste arv: 3
-
temperatuurivahemik alates [°C]: 95,
102 -
Temperatuurivahemik kuni [°C]: 84,
91 - Pistikukatte kuju: kolmnurkne
-
Kaal (kg): 0,
06 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pistikkontaktide arv: 2
-
Kaal (kg): 0,
3 - pakendi pikkus [cm]: 12
- pakendi laius [cm]: 8
- pakendi kõrgus [cm]: 6
-
OE-numbri jaoks: 03F919501B,
04E919501C
- Engine Code: BTS
-
Thread Size: M22x1,
5 - Spanner Size: 29
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: EPS
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks