• Fitting Position: Front Axle
• for brake disc diameter [mm]: 288, 312
• Pidurisüsteem: ATE
• Manufacturer: JP GROUP
• Lisainfo: Accessory Kit, disc brake pads
• Additional information: Accessory Kit, disc brake pads

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Pikkus (mm): 16
• Keermemõõt: M6x1
• Pöördeliik: koos väliskeermega
• Võtmekaugus: Torx-30
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M6x1 16,0mm Torx-30 2tk
• Additional information: M6x1 16,0mm Torx-30 2tk

Lisainfo: QB11667K

• for brake disc diameter [mm]: 320
• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE
• Manufacturer: JP GROUP
• Lisainfo: Accessory Kit, disc brake pads
• Additional information: Accessory Kit, disc brake pads

• Fitting Position: Front Axle
• Installatsiooni pool: esisild paremal, esisild vasakul
• Pidurisüsteem: ATE
• Pikkus (mm): 140
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Piduriliik: Ketaspidur
• Installatsiooni pool: Esisild
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 288, 312
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK
• Additional information: QB109-1123
• Lisainfo: QB109-1123

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 288, 312
• Pidurisüsteem: ATE
• Kaal (kg): 0,02
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Pikkus (mm): 16,1
• Keermemõõt: M6x1
• Materjal: Metall
• Pealispind: Kroom-(VI)-vaba passiveerimine
• Kruvipea-/Mutriprofiil: sise-Torx
• ka universaaltootena saadav vaata toode-nr.: TPM1000
• Kaal (kg): 0,003
• Name: Kruvi,piduriketas
• Manufacturer: TEX

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Keermemõõt: M6 x 1 x 16 mm
• vajaminev tükihulk: 2
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 288, 312
• Quantity per packing unit: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0210
• Lisainfo: LX0210
• Additional information: LX0210

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Pikkus (mm): 16
• Keermemõõt: M6x1
• Pöördeliik: koos väliskeermega
• Võtmekaugus: Torx-30
• Name: Kruvi,piduriketas
• Manufacturer: TRI

• Fitting Position: Front Axle
• Braking System: for vehicles with disc brakes on the rear axle
• Manufacturer Restriction: ATE
• Netokaal [kg]: 0,03
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: NK

• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE
• Name: Vedru, Pidurisadul
• Manufacturer: MAX

• Installatsiooni pool: Esisild, Tagasild
• Pidurisüsteem: ATE
• Kaal (kg): 0,024
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Pidurisüsteem: ATE
• OE-numbri jaoks: 1667526
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT

• Fitting Position: Front Axle
• Pidurisüsteem: Teves
• Kaal (kg): 0,027
• Manufacturer: TOMEX BRAKES

• Installatsiooni pool: Tagasild mõlemapoolselt
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Pidurisüsteem: Trw-Lucas
• Manufacturer: BREMBO
• Name: BR A 02 205

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 320
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Installatsiooni pool: Tagasild
• Pidurisüsteem: Lucas
• PR-numbri jaoks: 1KW, 2EH
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Pidurisüsteem: Lucas
• Osade arv [-osaline]: 4
• pakendi pikkus [cm]: 18,5
• pakendi laius [cm]: 12,5
• pakendi kõrgus [cm]: 1
• Kaal (kg): 0,085
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: TEX

• Installatsiooni pool: Esisild
• Pidurisüsteem: Ate.
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 312, 288
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 320
• Pidurisüsteem: ATE
• Kaal (kg): 0,12
• Manufacturer: A.B.S.

• Manufacturer Restriction: ATE, TEVES
• for brake disc thickness [mm]: 25, 30
• for brake disc diameter [mm]: 288, 312, 320
• for PR number: 1LB, 1LT, 1LA
• Block Separation:
• Installatsiooni pool: vasakul
• Garantii: 3 aastat garantii
• paaris tootenumbrid: 57SKV255
• Kaal (kg): 0,35
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Installatsiooni pool: esisild vasakul, esisild paremal
• Seerianumber: HCA-AU-003
• Manufacturer: NTY

• Installatsiooni pool: esisild vasakul
• Materjal: Raudplekk
• paaris tootenumbrid: V10-5058
• Pealispind: värvimisviis, tsingitud
• Kaal (kg): 0,3
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 288, 312
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• paaris tootenumbrid: 174903
• Installatsiooni pool: esisild vasakul
• Kaal (kg): 0,396
• Hooldusinfot jälgida:
• Name: Plekk,piduriketas
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paaris tootenumbrid: 174902
• Installatsiooni pool: esisild paremal
• Kaal (kg): 0,396
• Hooldusinfot jälgida:
• Name: Plekk,piduriketas
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 288, 312
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 320
• Quantity per packing unit: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0395
• Quality class: PJ

Additional information: "Tootja: DELPHI
MAZDA 3/FOCUS C-MAX
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
MAZDA 3/FOCUS C-MAX
(kvaliteediklass: PJ)"

• for PR number: 1KD, 1KP
• Fitting Position: Rear Axle
• Manufacturer: ATE

• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE
• Manufacturer: PROFIPOWER

• Installatsiooni pool: Esisild
• Takistus [oom]: 1 700
• OE-numbri jaoks: 8E0927803B
• Kinnitusaukude hulk: 1
• Name: MM MWSS029
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 320
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 320
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• paaris tootenumbrid: 175138
• Installatsiooni pool: Tagasild paremal
• Kaal (kg): 0,455
• Hooldusinfot jälgida:
• Name: Plekk,piduriketas
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paaris tootenumbrid: 175139
• Installatsiooni pool: Tagasild vasakul
• Kaal (kg): 0,455
• Hooldusinfot jälgida:
• Name: Plekk,piduriketas
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild vasakul
• Pealispind: värvimisviis, tsingitud
• Materjal: Raudplekk
• paaris tootenumbrid: V10-5062
• Kaal (kg): 0,471
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: esisild vasakul
• pidurikettaläbimõõdule (mm): 280, 288, 312
• Materjal: Metall
• paaris tootenumbrid: 8125 29123
• Pealispind: Krundeeritud keemiliselt
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Installatsiooni pool: esisild vasakul, esisild paremal
• Anduritüüp: Induktiivandur
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Fitting Position: Rear Axle Right
• Anduritüüp: Hallsensor
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

Vehicle Equipment: for vehicles with headlight levelling (automatic), for vehicles with dynamic bending light

• Installatsiooni pool: Esisild
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 1 005
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for PR number: 1KD, 1KP
• Installatsiooni pool: Tagasild paremal
• Materjal: Raudplekk
• Välisläbimõõt [mm]: 323
• pidurikettaläbimõõdule (mm): 245, 255
• paaris tootenumbrid: 117 979
• Manufacturer: TOPRAN

Pealispind: Must, värvitud, KTL-kattega (katoodne sukelduskatmine) Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: 1KD, 1KP
• Installatsiooni pool: Tagasild vasakul
• Materjal: Raudplekk
• Välisläbimõõt [mm]: 323
• pidurikettaläbimõõdule (mm): 245, 255
• paaris tootenumbrid: 117 980
• Manufacturer: TOPRAN

Pealispind: KTL-kattega (katoodne sukelduskatmine), Must, värvitud Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Anduritüüp: passiivne andur
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 957
• Installatsiooni pool: esisild paremal, esisild vasakul
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0086

• Fitting Position: Front Axle
• Brake System: ATE
• for brake disc diameter [mm]: 320
• Tootja piirang: Flache Klammer
• Manufacturer: METZGER

• Installatsiooni pool: esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: koos kaabliga
• Pikkus (mm): 1 040
• Sõidukivarustus: Kliimaautomaatikaga sõidukile
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left
• Quantity: 1
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 6
• Name: CZUJNIK ABS AUDI A4, RS4, S4/ SEAT EXEO, EXEO ST
• Manufacturer: DLP

• Installatsiooni pool: Tagasild paremal
• Pealispind: värvimisviis, tsingitud
• paaris tootenumbrid: V10-5061
• Materjal: Raudplekk
• Kaal (kg): 0,471
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Esisild
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 050
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Installatsiooni pool: Tagasild paremal
• Kaablipikkus (mm): 1 380
• Pistikkontaktide arv: 2
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS126

• for PR number: 1KW
• Fitting Position: Rear Axle
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: ATE

• Fitting Position: Rear Axle Right
• for PR number: 8Q5
• Piirangutega toode/piirangu info 2: koos kaabliga, kummist lüüvers
• Pikkus (mm): 1 450
• Sõidukivarustus: Kliimaautomaatikaga sõidukile
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: HAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• paired article number: 1148000034
• Installatsiooni pool: Tagasild paremal
• Anduritüüp: Hallsensor
• Kaablipikkus (mm): 1 360
• Pistikkontaktide arv: 2
• paaris tootenumbrid: 20-0337
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

Vehicle Equipment: for vehicles with headlight levelling (automatic), for vehicles with dynamic bending light

• Installatsiooni pool: Esisild
• Pikkus (mm): 975
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,15
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV038

• Fitting Position: Rear Axle both sides, Front Axle both sides
• Kaablipikkus (mm): 1 365
• Ühenduste arv: 2
• Manufacturer: JPN

• Fitting Position: Rear Axle Right
• pikkus üle kõige (mm): 1 440
• Pikkus (mm): 28
• Anduritüüp: passiivne andur
• Pistiku värv: must
• Kaal (kg): 0,2
• Kaablipikkus (mm): 1 370
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• pikkus üle kõige (mm): 1 050
• Pikkus (mm): 28
• Anduritüüp: passiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 1 000
• paaris tootenumbrid: 30010
• Kaal (kg): 0,13
• Manufacturer: A.B.S.

• Installatsiooni pool: Tagasild
• Garantii: 5 aastat garantii
• Name: HU 131407
• Manufacturer: HUECO / HITACHI

• paired article number: 1148000023
• Installatsiooni pool: Tagasild vasakul
• Anduritüüp: Aktiivne andur
• vajaminev tükihulk: 1
• Kaablipikkus (mm): 1 335
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Pistikkontaktide arv: 2, 6
• paaris tootenumbrid: 20-0338
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

Vehicle Equipment: for vehicles with headlight levelling (automatic), for vehicles with dynamic bending light

• Quantity: 1, 2
• Kaablipikkus (mm): 1 197
• Installatsiooni pool: Tagasild
• Üldine informatsioon: ABS speed sensor; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle Right
• Anduritüüp: passiivne andur
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 1 372
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0030

• Fitting Position: Front Axle
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 4
• Kaablipikkus (mm): 1 035
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Anduritüüp: Induktiivandur
• Installatsiooni sügavus (mm): 28
• Installatsiooni pool: esisild paremal, esisild vasakul
• pikkus üle kõige (mm): 980
• Pikkus (mm): 380
• OE-numbri jaoks: 8E0927803B
• Manufacturer: MEAT&DORIA

• Fitting Position: Rear Axle Left
• for PR number: 8Q5
• Piirangutega toode/piirangu info 2: koos kaabliga
• pikkus üle kõige (mm): 1 450
• Manufacturer: TOPRAN

Sõidukivarustus: Kliimaautomaatikaga sõidukile, tulekaugusregulaatoriga sõidukitele e(automaatne) Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Fitting Position: Rear Axle Right
• Piirangutega toode/piirangu info 2: koos kaabliga
• Name: CZUJNIK ABS VW T. A4 PR 02-
• Manufacturer: BRM

• for PR number: 8Q0, 8Q1, 8Q3, 8Q5
• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Nominaalpinge (V): 12
• Takistus [oom]: 1 650
• Kaablipikkus (mm): 1 360
• Anduritüüp: Hallsensor, passiivne andur
• Pistikkontaktide arv: 2
• Kaal (kg): 0,138
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 2
• Fitting Position: Front Axle
• Piirangutega toode/piirangu info 2: koos kaabliga
• Name: CZUJNIK ABS VW P. A4 02- LE/PR 1050MM
• Manufacturer: BRM

• Required quantity: 1
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaablipikkus (mm): 1 370
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6PU012806891
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Installatsiooni pool: Tagasild
• Pikkus (mm): 1 385
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,17
• Rakendustüüp: elektriline
• Pistiku värv: must
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV338

• Fitting Position: Rear Axle Left
• pikkus üle kõige (mm): 1 190
• Pikkus (mm): 28
• Anduritüüp: passiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 1 120
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• paaris tootenumbrid: 30719
• Kaal (kg): 0,2
• Manufacturer: A.B.S.