• Fitting Position: Rear Axle
• Brake System: Lucas
• Height [mm]: 53
• Width [mm]: 87
• Thickness [mm]: 17.2
• Wear Warning Contact: not prepared for wear warning indicator
• Lisainfo: Brake pad set, rear, 17.2 mm
  PR:1KD,1KU
  
• Additional information: Brake pad set, rear, 17.2 mm
  PR:1KD,1KU
  

• for PR number: 1KP
• Fitting Position: Rear Axle
• Brake System: Lucas
• Height [mm]: 53
• Width [mm]: 87
• Thickness [mm]: 15.2
• Wear Warning Contact: not prepared for wear warning indicator
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, rear, 15.2 mm
• Additional information: Brake pad set, rear, 15.2 mm

• Fitting Position: Rear Axle
• Brake System: Lucas
• Height [mm]: 55.9
• Width [mm]: 106
• Thickness [mm]: 17.2
• Wear Warning Contact: prepared for wear warning indicator
• Manufacturer: JP GROUP

Lisainfo: Brake pad set, rear, 17.2 mm Anduri paigaldus võimalus Pikkus 105,5 mm Additional information: Brake pad set, rear, 17.2 mm Anduri paigaldus võimalus Pikkus 105,5 mm

• for PR number: 1KW
• Fitting Position: Rear Axle
• Brake System: LUCAS/TRW
• Height [mm]: 55.9
• Width [mm]: 105
• Thickness [mm]: 17.1
• Vehicle Equipment: for vehicles without electric parking brake
• Wear Warning Contact: prepared for wear warning indicator
• Manufacturer: JP GROUP
• Lisainfo: 17.2 mm, ilma kulumis andurita
• Additional information: 17.2 mm, ilma kulumis andurita

Lisainfo: Brake Pad Set, disc brake

• Fitting Position: Front Axle
• Brake System: Teves
• Height [mm]: 74.1
• Width [mm]: 156
• Thickness [mm]: 19.6
• Wear Warning Contact: with integrated wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, front, 19.8 mm
• Additional information: Brake pad set, front, 19.8 mm

• for PR number: 1LT
• Fitting Position: Front Axle
• Brake System: Teves
• Height [mm]: 74
• Width [mm]: 156
• Thickness [mm]: 20.4
• Wear Warning Contact: with integrated wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, front, 20.3 mm
• Additional information: Brake pad set, front, 20.3 mm

• Filter type: In-Line Filter
• Height [mm]: 176
• Outer Diameter [mm]: 74
• Inlet Ø [mm]: 8, 10
• Outlet Ø [mm]: 8
• Lisainfo: Fuel filter with pressure regulator
• Additional information: Fuel filter with pressure regulator

• Driven Units: Water Pump
• Vehicle configuration line / variant: HT
• for OE number: 06H121605E
• Number of Teeth: 54
• Width [mm]: 12
• Name: HAMMASRIHM
• Manufacturer: DAY

• Driven Units: Water Pump
• Number of Teeth: 54
• Length [mm]: 270
• Width [mm]: 12
• Tooth Pitch [mm]: 5
• Name: HAMMASRIHM
• Manufacturer: BOS

• Driven Units: Water Pump
• Number of Teeth: 54
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.1
• Width [mm]: 12
• Tooth Pitch [mm]: 5
• Name: HAMMASRIHM
• Manufacturer: CON

• Fitting Position: Rear Axle
• for PR number: 1KD, 1KP
• Quantity per packing unit: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 52.9
• Brake System: TRW
• Width [mm]: 87
• Thickness [mm]: 17
• Manufacturer: LPR
• Name: LPR 05P634
• Additional information: 05P634
• Lisainfo: 05P634

• Fitting Position: Rear Axle
• Width [mm]: 87
• Thickness [mm]: 15
• Height [mm]: 53
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas - TRW
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• for PR number: 1KP
• Fitting Position: Rear Axle
• Width [mm]: 87
• Height [mm]: 53
• Thickness [mm]: 15.2
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Driven Units: Water Pump
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 54
• Width [mm]: 12
• Tooth Pitch [mm]: 5
• Length [mm]: 270
• Manufacturer: GATES

• Fitting Position: Rear Axle
• for PR number: 1KD, 1KP
• Wear Warning Contact: not prepared for wear warning indicator
• Thickness [mm]: 15
• Width [mm]: 87
• Height [mm]: 52.9
• Manufacturer: JPN

• for PR number: 1KP
• for brake disc diameter [mm]: 255
• Fitting Position: Rear Axle
• Thickness [mm]: 17
• Length [mm]: 87
• Width [mm]: 53
• Brake System: TRW Lucas
• WVA Number: 20961
• Manufacturer: ASHIKA-KLOCKI

• Filter type: In-Line Filter
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• for OE number: 420201511
• Height [mm]: 176
• Fuel Type: Petrol
• Outer Diameter [mm]: 75
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Width [mm]: 88
• Thickness [mm]: 17
• Height [mm]: 53
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas - TRW
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Width [mm]: 87
• Height [mm]: 53
• Thickness [mm]: 17.2
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• for PR number: 1KD
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 15
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Manufacturer: AUTO-GH

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs

• for PR number: 1KW
• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with electric parking brake
• Width 1 [mm]: 105.2
• Height [mm]: 56.4
• Thickness [mm]: 16.9
• Brake System: Lucas / TRW
• Test Mark: ECE R90
• Manufacturer: ABAKUS LORO

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for PR number: 1KP
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 15
• Width [mm]: 87
• Height [mm]: 52.9
• Brake System: TRW
• Supplementary Article/Info 2: with brake caliper screws
• Weight [kg]: 0.73
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Width [mm]: 105
• Thickness [mm]: 17
• Height [mm]: 56
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas - TRW
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• for PR number: 1KP
• Quantity per packing unit: 4
• FMSI Code: D340-7234
• Test Mark: E1 90R-01878/585
• Brake System: TRW
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20960
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.2
• Width 2 [mm]: 87
• Height 1 [mm]: 53
• Height 2 [mm]: 53
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP571

• for PR number: 1KD, 1KP
• Fitting Position: Rear Axle
• Width [mm]: 87.6
• Thickness [mm]: 15.2
• Height [mm]: 52.9
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

• for PR number: 1KP
• Fitting Position: Rear Axle
• Test Mark: R90 Homologated
• Length [mm]: 87
• Height 1 [mm]: 53
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Packing Type: Box
• Supplementary Article/Info 2: with brake caliper screws
• Thickness [mm]: 15
• Number of threaded bolts: 4
• Width [mm]: 53
• Brake System: TRW
• WVA Number: 20961
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 15
• WVA Number: 20960
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Manufacturer: VALEO
• Name: VA 301180

• for PR number: 1KP
• Fitting Position: Rear Axle
• Test Mark: R90 Homologated
• Length [mm]: 87
• Height 1 [mm]: 53
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Packing Type: Box
• Supplementary Article/Info 2: with brake caliper screws
• Thickness [mm]: 15
• Number of threaded bolts: 4
• Width [mm]: 53
• Brake System: TRW
• WVA Number: 20961
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Brake System: Girling-Lucas
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 53.1
• Wear Warning Contact: excl. wear warning contact
• Vibration: with vibration damper
• Width 1 [mm]: 87.2
• Thickness 1 [mm]: 16
• Manufacturer: METELLI UKL.HAMULCOWY

• for PR number: 1KW
• Fitting Position: Rear Axle
• Width [mm]: 105.3
• Thickness [mm]: 17.1
• Height [mm]: 55.9
• Vehicle Equipment: for vehicles without electric parking brake
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact

• for PR number: 1KP
• for brake disc diameter [mm]: 255
• Fitting Position: Rear Axle
• Thickness [mm]: 17
• Length [mm]: 87
• Width [mm]: 53
• Brake System: TRW Lucas
• WVA Number: 20961
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• for PR number: 1KD, 1KP
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 15
• Length [mm]: 87
• Height [mm]: 53
• Wear Warning Contact: not prepared for wear warning indicator
• Brake Pad: With bevelled edges
• Brake System: TRW
• WVA Number: 20961
• Name: SK VKBP90229
• Manufacturer: SKF

• for PR number: 1LZ
• Fitting Position: Front Axle
• Width 1 [mm]: 119.1
• Height [mm]: 69.5
• Thickness [mm]: 19.6
• Warning Contact Length [mm]: 196
• Brake System: Lucas / TRW
• Test Mark: ECE R90
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for PR number: 1KW
• Fitting Position: Rear Axle
• Width [mm]: 105.2
• Thickness [mm]: 16.9
• Height [mm]: 56.4
• Vehicle Equipment: for vehicles with electric parking brake
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN HAMULCE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Filter type: In-Line Filter
• Height [mm]: 176
• Outer Diameter [mm]: 74
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: MAX

• for PR number: 1KP
• Fitting Position: Rear Axle
• Width [mm]: 87.1
• Height [mm]: 52.8
• Thickness [mm]: 17.2
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: TRW
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY
• Lisainfo: 0252096117
• Additional information: 0252096117

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Rear Axle
• for PR number: 1KP
• Quantity per packing unit: 4
• FMSI Code: D340-7234
• Test Mark: E1 90R-01878/585
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20960
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.2
• Width 2 [mm]: 87
• Height 1 [mm]: 53
• Height 2 [mm]: 53
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP2255

• Fitting Position: Rear Axle
• for PR number: 1KD, 1KP
• Quantity per packing unit: 4
• Height [mm]: 53
• Supplementary Article/Info 2: with bolts/screws
• Width [mm]: 87
• Thickness [mm]: 16.2
• Brake System: TRW
• Manufacturer: LPR
• Additional information: 05P1788
• Lisainfo: 05P1788

• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 17
• WVA Number: 20960
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Manufacturer: VALEO
• Name: VA 301463

• Fitting Position: Rear Axle
• for PR number: 1KP
• Width [mm]: 87
• Height [mm]: 53
• Thickness [mm]: 15.2
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• for PR number: 1KW
• Quantity per packing unit: 4
• Width [mm]: 105.3
• Brake System: TRW
• Thickness [mm]: 16.9
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 55.5
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Height [mm]: 56.3
• Thickness [mm]: 17.2
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: Lucas
• Width [mm]: 106
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• for PR number: 1KD, 1KP
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 15
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Test Mark: E9 90R 01120/457
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs

• Filter type: In-Line Filter
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Height [mm]: 176
• Outer Diameter [mm]: 74
• Manufacturer: DENCKERMANN FILTRY

• for PR number: 1LZ
• Manufacturer Restriction: TRW
• Width [mm]: 119
• Height [mm]: 69.5
• Thickness [mm]: 19.4
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Warning Contact Length [mm]: 210
• Fitting Position: Front Axle
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX
• Lisainfo: 19-0506
• Additional information: 19-0506

• Filter type: In-Line Filter
• Pressure [bar]: 6
• Height [mm]: 177
• Outer Diameter [mm]: 74
• Supplementary Article/Info 2: with pressure regulator
• Weight [kg]: 0.28
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 119
• Thickness [mm]: 19
• Height [mm]: 70
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas - TRW
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• for OE number: 4F0 201 511 E
• Diameter [mm]: 83
• Height [mm]: 176
• Height 1 [mm]: 95
• Fuel Mixture Formation: Petrol Injection
• Inlet Ø [mm]: 9.9
• Outlet Ø [mm]: 7.9
• Filter type: Filter Insert
• Manufacturer: DELLO AUTOMEGA

• for PR number: 1LZ
• Fitting Position: Front Axle
• Wear Warning Contact: incl. wear warning contact
• Thickness [mm]: 19.6
• Width [mm]: 119.1
• Height [mm]: 69.5
• Brake System: Lucas / TRW
• Warning Contact Length [mm]: 196
• Number of bolts/screws: 2
• Manufacturer: JPN

• Fitting Position: Rear Axle
• for PR number: 1KP
• Quantity per packing unit: 4
• Width [mm]: 87
• Thickness [mm]: 15
• Height [mm]: 53
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Lucas
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 20961, 23554
• Manufacturer: BREMBO
• Name: BR P 85 017

• Fitting Position: Rear Axle
• for PR number: 1KP
• Width [mm]: 87
• Height [mm]: 53
• Thickness [mm]: 15.2
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: Lucas
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Width [mm]: 119
• Thickness [mm]: 19
• Height [mm]: 69
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Brake System: Lucas - TRW
• Warning Contact Length [mm]: 196
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• for PR number: 1LZ
• Fitting Position: Front Axle
• Width [mm]: 119.1
• Thickness [mm]: 19.6
• Height [mm]: 69.5
• Wear Warning Contact: incl. wear warning contact
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Brake System: LUCAS
• Supplementary Article/Info 2: with bolts/screws, without anti-squeak plate
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 15.2
• WVA Number: 20960
• Wear Warning Contact: excl. wear warning contact
• Test Mark: ECE-R90
• Manufacturer: VALEO

• Fitting Position: Front Axle
• for PR number: 1LZ
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 119
• Height [mm]: 69.5
• Thickness [mm]: 19.4
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Warning Contact Length [mm]: 210
• Manufacturer: AUTO-GH

• for PR number: 1KP
• Fitting Position: Rear Axle
• Width [mm]: 87.1
• Height [mm]: 52.8
• Thickness [mm]: 17.2
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: TRW
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with anti-squeak plate, with brake caliper screws
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Front Axle
• for PR number: 1LB
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Width [mm]: 156.4
• Height [mm]: 74.2
• Thickness [mm]: 19.5
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Warning Contact Length [mm]: 210
• directional:
• Observe technical data:
• Manufacturer: AUTO-GH

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs

• Fitting Position: Front Axle
• Width [mm]: 73
• Thickness [mm]: 20
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Brake System: ATE
• Warning Contact Length [mm]: 240
• Height 1 [mm]: 155
• Height 2 [mm]: 156
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• for PR number: 1LT
• Width [mm]: 156
• Height [mm]: 74
• Thickness [mm]: 20.4
• Wear Warning Contact: with integrated wear sensor
• directional:
• Brake System: Teves
• Article number of recommended accessories: 27-0732
• Fitting Position: Front Axle
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• for PR number: 1KW
• Quantity per packing unit: 4
• Thickness [mm]: 16.9
• Width [mm]: 105.3
• Height [mm]: 55.5
• Supplementary Article/Supplementary Info: with accessories
• Brake System: TRW
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Height [mm]: 57
• Thickness [mm]: 17
• Width [mm]: 106
• WVA Number: 23914
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Lucas
• Weight [kg]: 1.164
• Name: ALT 137825AAL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle
• Width [mm]: 156
• Thickness [mm]: 20
• Height [mm]: 74
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Brake System: ATE
• Warning Contact Length [mm]: 200
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• for PR number: 1KD, 1KP
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Wear Warning Contact: not prepared for wear warning indicator
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 15
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Test Mark: E9 90R-02A1148/0457
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

Braking System: Low dust brake pads, also for perforated brake discs, not for carbon-ceramic brake discs, only in conjunction with steel brake discs

• Fitting Position: Rear Axle
• Brake System: TRW
• WVA Number: 20961
• Length 1 [mm]: 87
• Height 1 [mm]: 53
• Thickness 1 [mm]: 16
• Wear Warning Contact: not prepared for wear warning indicator
• Manufacturer: MAGNETI MARELLI

• for PR number: 1KD, 1KP
• Fitting Position: Rear Axle
• Width [mm]: 87.6
• Height [mm]: 52.9
• Thickness [mm]: 15.2
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Test Mark: E1 90R-02A0333/0220, E9 90R-02A1163/1123
• MAPP code available:
• Article number of recommended accessories: 13.0460-0419.2, 13.0460-0516.2
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE
• Quality class: Q

• for PR number: 1LB, 1LT
• Fitting Position: Front Axle
• Width [mm]: 156.3
• Thickness [mm]: 19.8
• Height [mm]: 74
• Wear Warning Contact: incl. wear warning contact
• Brake System: ATE
• Thickness 2 [mm]: 20.3
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Height [mm]: 176
• Outer Diameter [mm]: 74
• Filter type: In-Line Filter
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Return pipe connector diameter [mm]: 10
• Manufacturer: DRIVE