• Number of pins: 2
• Colour: black
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for air intake
• Additional information: Temperature sensor for air intake

• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: dark grey
• Fitted Diameter [mm]: 25
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 20
• for OE number: 06A919501A
• Manufacturer: MEAT&DORIA

• Connector Shape: D Shape
• Number of pins: 2
• Housing material: GRP (Glass fibre Reinforced Plastic), PA 66 GF 30
• Sensor Type: NTC Sensor
• Number of mounting bores: 1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CDHB
• Colour: grey
• for article number: 26.0015K, 7.3278K, 7.7946
• Manufacturer: FACET

• Engine Code: CDHB
• Colour: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Thread Size: 12 mm
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Number of pins: 2
• Housing Colour: black
• Name: Andur,sisendohu temperatuur
• Manufacturer: DLP

• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Length [mm]: 20
• Colour Coding: grey
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA111

• Voltage [V]: 12
• Manufacturer: FAE
• Additional information: NRF33227
• Lisainfo: NRF33227

• Sensor Type: NTC Sensor
• Diameter [mm]: 12
• Supplementary Article/Info 2: with connector parts
• Colour: black
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Engine Code: CDHB
• Manufacturer: FACET

• Engine Code: CDHB
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• for OE number: 07L 905 163 C
• Length [mm]: 40
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: ECP-AU-015
• Manufacturer: NTY

• Number of connectors: 2
• Weight [kg]: 0.012
• for OE number: 06B 905 379 D
• Name: Andur,sisendohu temperatuur
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: intake air temperature sensor
• Manufacturer: BORSEHUNG

• for OE number: 038 906 051 D
• Fabrication Number: ECM-AU-004
• Manufacturer: NTY
• Name: NTY ECM-AU-004

Lisainfo: ENG.1.8T,1.8TSI,2.0TSI,2.0TFSI AUDI A3 04-13,A4 B7/B8,Q3 11-18, VW GOLF V/VI,JETTA III/IV,PASSAT B7,TIGUAN 07-18, SKODA OCTAVIA II 07-13,SUPERB II 05-15, SEAT ALTEA 07-,ALHAMBRA 10-12 Additional information: ENG.1.8T,1.8TSI,2.0TSI,2.0TFSI AUDI A3 04-13,A4 B7/B8,Q3 11-18, VW GOLF V/VI,JETTA III/IV,PASSAT B7,TIGUAN 07-18, SKODA OCTAVIA II 07-13,SUPERB II 05-15, SEAT ALTEA 07-,ALHAMBRA 10-12

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Diameter [mm]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Number of pins: 2
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MEY

• General Information: pressure sensor
• Manufacturer: VIKA

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Fabrication Number: ECM-AU-009
• Manufacturer: NTY
• Name: NTY ECM-AU-009

• Number of pins: 2
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109231
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Length [mm]: 40
• Width [mm]: 43
• Thickness [mm]: 18
• Number of connectors: 3
• Weight [kg]: 0.011
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 40
• Width [mm]: 43
• Thickness [mm]: 18
• Number of connectors: 3
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 94 3778
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) to: 3R-B-021 700
• Cable Cross Section [mm²]: 0.75
• Manufacturer Restriction: VAG
• Socket Width [mm]: 2.8
• Number of pins: 3
• Cable Length [mm]: 250
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

Manufacturer: BOSCH

• Fabrication Number: EFP-AU-006
• Manufacturer: NTY
• Name: NTY EFP-AU-006

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Name: Lambda andur
• Manufacturer: MAX

Manufacturer: NRF

• General Information: pressure sensor
• Manufacturer: BORSEHUNG

• Engine Code: CDHB
• Pressure from [kPA]: 20
• Pressure to [kPA]: 255
• Output Voltage, from [V]: 0.39
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.188
• Manufacturer: EPS

• Used part return not required:
• Fabrication Number: EPP-AU-015
• Manufacturer: NTY

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV588
• Manufacturer: ESEN SKV

• Fitting Position: Fuel Rail
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Supplementary Article/Info 2: High Pressure Side
• Thread Length [mm]: 15
• Spanner Size: 27
• Number of pins: 3
• Mounting Type: Bolted
• Housing Colour: brown
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Fuel Mixture Formation: Direct Injection
• Connector Shape: D Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: Andur,ktuserohk
• Manufacturer: MAX

• Oxygen Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 720
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.27
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV158

• Quantity: 1
• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Fitting Position: Rear
• Connector/Clamp: Connector may need adjustment
• Number of pins: 4
• General Information: lambda probe; rear; 4 wire
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: 3R-B-021 700
• Cable Cross Section [mm²]: 0.75
• Manufacturer Restriction: VAG
• Socket Width [mm]: 1.5
• Number of pins: 6
• Cable Length [mm]: 200
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, EGR-klapp
• Manufacturer: HBE

• Oxygen Sensor: Oxygen Sensor
• Fitting Position: Rear
• General Information: lambda probe; rear
• Manufacturer: VIKA

• Fitting Position: from fuel distributor to feed pipe
• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Length [mm]: 1,300
• Number of circuits: 4
• Conductor Number: 4
• Resistor [Ohm]: 9
• Cable Length [mm]: 1,300
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

Manufacturer: MAGNETI MARELLI

• Observe technical data:
• Fitting Position: before catalytic converter
• Manufacturer Restriction: VAG
• Number of pins: 6
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Socket Width [mm]: 2.8
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Engine Code: CDHB
• Fitting Position: after catalytic converter
• Colour: black
• Cable Length [mm]: 800
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.243
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 750
• Number of pins: 4
• Supplementary Article/Info 2: with mounting manual
• Manufacturer: FAE

• Housing Type: with housing
• Number of pins: 5
• Housing material: PBT, GRP (Glass fibre Reinforced Plastic)
• Fitting Position: Air Filter Housing
• Number of mounting bores: 2
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

Supplementary Article/Info 2: without seal ring, with integrated grille, with integrated air temperature sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Diagnostic Probe, Planar probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 570
• Number of pins: 4
• Weight [kg]: 0.18
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV423

• for OE number: 022906262AB
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 800
• Number of pins: 4
• Weight [g]: 111
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
A6 (4F2, C6), 05.04-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A6 (4F2, C6), 05.04-
(kvaliteediklass: Q)"

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: Ohumassimootja
• Manufacturer: BRM

• Oxygen Sensor: Planar probe
• Length [mm]: 1,300
• Number of pins: 4
• Supplementary Article/Info 2: with mounting manual
• Manufacturer: FAE

• Oxygen Sensor: Regulating Probe, Heated
• Length [mm]: 800
• Conductor Number: 5
• Number of circuits: 5
• Resistor [Ohm]: 4.9
• Cable Length [mm]: 800
• Manufacturer: MAGNETI MARELLI

• Quantity: 1
• Recommended additional repairs: Air Filter
• General Information: air mass meter
• Manufacturer: VIKA

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Probe, Broadband oxygen sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 331
• Manufacturer: DELPHI ELEKTRONIKA

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Oxygen Sensor: Regulating Probe, Broadband oxygen sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 615
• Name: DE ES21368-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 800
• Number of pins: 6
• Socket colour: black
• Manufacturer: FAE

• Engine Code: CDHB
• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 800
• Name: Lambda andur
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• Engine Code: CDHB
• Fitting Position: before catalytic converter
• Colour: grey
• Length [mm]: 750
• Cable Length [mm]: 735
• Conductor Number: 5
• Supplementary Article/Info 2: with fastening material
• Number of circuits: 5
• Name: EP 1.998.374
• Manufacturer: EPS

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• Model Year to: 2013
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 6
• Cable Length [mm]: 805
• Weight [kg]: 0.121
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: DLP