Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Bearing Type: Angular Ball Bearing
-
Lisainfo: Ball bearing for strut bearing,
upper -
Additional information: Ball bearing for strut bearing,
upper
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Lisainfo: Support for shock absorber,
rear, upper -
Additional information: Support for shock absorber,
rear, upper
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Lisainfo: Support for shock absorber,
rear, upper -
Additional information: Support for shock absorber,
rear, upper
- Fitting Position: Rear Axle
-
Lisainfo: Dust Cover Kit,
shock absorber -
Additional information: Dust Cover Kit,
shock absorber
-
for PR number: G55,
G57 - Braking/Drive Dynamics: for vehicles without EDC
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Height [mm]: 13.5
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Laager -
Kndmik VW GOLF/ PASSAT 91- - Manufacturer: MAX
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 7201592
- Manufacturer: GSP
- Fitting Position: Front Axle
- Weight [kg]: 0.056
- Required quantity: 2
- Inner Diameter [mm]: 14
-
Name: Laager,
amorditugilaager - Manufacturer: TED
- Fitting Position: Front Axle
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Height [mm]: 14
- Manufacturer: DELLO AUTOMEGA
-
Production date from: 05/
08 - Fitting Position: Front Axle
- for OE number: 1J0412249
- Manufacturer: SASIC
- Width [mm]: 13.5
- Weight [kg]: 0.08
- Bearing Type: Angular Ball Bearing
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Material: Plastic
- Required quantity: 2
- Fitting Position: Front Axle
- General Information: deep groove ball thrust bearing; front
- Manufacturer: VIKA
-
Fitting Position: Front Axle Left,
Front Axle Right - Base body material: Sheet Steel
-
Name: Laager -
Kndmik. VW P. GOLF 4 - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 10
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle
-
Name: Laager -
Kndmik. VW P. GOLF 4 Z O½YSKIEM - Manufacturer: MAX
- Fitting Position: Front Axle Left
- Weight [g]: 65
- Bearing manufacturer: IMPERGOM
- Thickness [mm]: 13.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
-
Name: IM 32295/
1 - Manufacturer: ORIGINAL IMPERIUM
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Quality class: PJ
-
Name: Top mount left,
right
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Name: GH 364709
-
Manufacturer: AUTO-
GH
-
Fitting Position: Front Axle Right,
Front Axle Left - Manufacturer: 3RG
- Fitting Position: Front Axle
- Weight [kg]: 0.07
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
for PR number: G75,
G76, G77 - Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Height [mm]: 13.5
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Laager,
amorditugilaager - Manufacturer: MAX
- Model Year to: 2011
-
for combined PR number: G17,
G19, G21, G24 - Fitting Position: Front Axle
- Weight [kg]: 0.065
- Packaging length [cm]: 4.5
- Packaging width [cm]: 4.5
- Packaging height [cm]: 1.4
- Inner Diameter [mm]: 14.2
- Outer Diameter [mm]: 45.5
- Manufacturer: FEBEST
- for OE number: 1J0 412 249
- Fitting Position: Front Axle
- Bearing Type: Angular Ball Bearing
- Material: Plastic
- Width [mm]: 13.5
- Outer Diameter [mm]: 45
- Manufacturer: TRUCKTEC AUTOMOTIVE
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Alternative Repair Kit: 108 561
- Consult accessories list for recommended additional repairs:
- Supplementary Article/Info 2: without rolling bearing
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - Required quantity: 2
- Supplementary Article/Info 2: without bearing
- Alternative Repair Kit: 80001637
- Weight [kg]: 0.23
- Name: COC 21652788
- Manufacturer: CORTECO
- for OE number: 1J0512149B
- Fitting Position: Rear Axle
- Weight [g]: 104
- Name: IM 37242
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 82
- Manufacturer: JP GROUP
-
Lisainfo: Bearing for strut,
without bearing, front -
Additional information: Bearing for strut,
without bearing, front
-
for PR number: G75,
G76, G77 - Fitting Position: Front Axle
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 45
- Height [mm]: 13.5
- Bearing Type: Ball Bearing
- Manufacturer: MEY
Name: Laager - Kndmik AUDI A1 10- SEAT IBIZA V 08-, TOLEDO 12-
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 1J0 412 331 B
- Manufacturer: GSP
- Fitting Position: Front Axle
- SVHC: No SVHC present!
- Name: Vedruamordi tugilaager
- Manufacturer: FAG
- Fitting Position: Front Axle
- Quantity per axle: 2
-
Name: Laager -
Kndmik VW - Manufacturer: SKF
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right - Supplementary Article/Info 2: with bearing
-
Fabrication Number: AD-
VW- 006 - Manufacturer: NTY
-
Name: NTY AD-
VW- 006
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Model Year from: 2016
-
for PR number: G55,
G57 - Suspension: for vehicles without electronic suspension control
- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Laager -
Kndmik. VW P. GOLF 4 KPL. - Manufacturer: MAX
- Model Year from: 2016
-
for PR number: G55,
G57 - Suspension: for vehicles without electronic suspension control
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
Name: Laager -
Kndmik VW P. GOLF 91- PASSAT - Manufacturer: SAA
for OE number: 1J0 412 249, 357 412 249, 357 412 249 A, 450 330 00 51, 7201848, 95VW-3K031-AA, A 450 330 00 51
- Model Year from: 2016
-
for PR number: G55,
G57 - Suspension: for vehicles without electronic suspension control
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
Name: Laager -
Kndmik VW GOLF/ PASSAT 91- - Manufacturer: LMI
for OE number: 1J0 412 249, 357 412 249, 357 412 249 A, 450 330 00 51, 7201848, 95VW-3K031-AA, A 450 330 00 51
- Fitting Position: Front Axle
- Manufacturer: OYODO
-
Fitting Position: Right,
Front Axle, Front Axle Right - Outer Diameter 1 [mm]: 65
- Height [mm]: 53
- Outer Diameter 2 [mm]: 82
- Name: SN KBLF410.82
-
Manufacturer: NTN-
SNR
- Material: Rubber
-
Fitting Position: Upper,
Rear Axle both sides - Outer Diameter [mm]: 75
- Supplementary Article/Info 2: without bearing
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 53
- Inner Diameter [mm]: 26
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: BGA
- Fitting Position: Front Axle
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
- Supplementary Article/Info 2: without bearing
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Laager -
Kndmik. VW P. GOLF 4 - Manufacturer: MEY
- not for vehicle type: Cupra
- Fitting Position: Front Axle
- Manufacturer: ASHIKA
- Model Year to: 2015
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- for OE number: 6R0 412 249
-
Name: Laager,
amorditugilaager - Manufacturer: SAA
- Model Year from: 2016
-
for PR number: G75,
G76, G77 - Suspension: for vehicles without electronic suspension control
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- for OE number: 6R0 412 249
- Manufacturer: LMI
Name: Laager - Kndmik AUDI A1 10- SEAT IBIZA V 08-, TOLEDO 12-
- Fitting Position: Front Axle
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle
- Thickness [mm]: 54
- Weight [kg]: 0.237
- Required quantity: 2
-
Material: Rubber/
Metal - Inner Diameter [mm]: 26
- Outer Diameter [mm]: 83
- Mounting Type: Rubber Mount
- Manufacturer: METALCAUCHO
- Fitting Position: Front Axle
- Weight [kg]: 0.237
- Required quantity: 2
- Thickness [mm]: 54
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 83
-
Material: Rubber/
Metal - Supplementary Article/Info 2: without ball bearing
- General Information: Shock absorber top rubber; front
- Manufacturer: VIKA
- not for vehicle type: Cupra
- Fitting Position: Front Axle
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- Weight [kg]: 0.28
-
Material: Rubber/
Metal - Inner Diameter [mm]: 14.2
- Outer Diameter [mm]: 83
- Weight [g]: 280
- Supplementary Article/Info 2: with rolling bearing
- Manufacturer: METALCAUCHO
- Fitting Position: Front Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: GSP
- Height [mm]: 54
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 83
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.237
- Supplementary Article/Info 2: without ball bearing
- Observe service information:
-
Name: Laager -
Kndmik. VW P. GOLF 4 - Manufacturer: FEB
- Additional information: FE09227
- Lisainfo: FE09227
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Required quantity: 2
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: CORTECO
- Name: COC 80001637
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 26
- Outer Diameter [mm]: 83
- Height [mm]: 54
- Manufacturer: 3RG
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left -
Manufacturer: AUTO-
GH
-
Fitting Position: Front Axle both sides,
Front Axle - Name: CFD 150201
- Manufacturer: DACO
- Suspension: for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Manufacturer: MAX
Name: Laager - Kndmik. VW T. BORA/GOLF 4/FABIA/A2/OCTAVIA 96- LE/PR
- Height [mm]: 54
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 83
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.237
- Supplementary Article/Info 2: without ball bearing
- Name: SW 30 54 0012
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 11
-
Fabrication Number: AD-
VW- 018 - Manufacturer: NTY
-
Name: NTY AD-
VW- 018
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - for OE number: 1J0 513 353 B S1
-
Fabrication Number: AD-
VW- 020 - Manufacturer: NTY
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount -
Fabrication Number: AD-
VW- 007 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle,
both sides - Quality: OE Performance
- Colour: silver
- Weight [g]: 239
- Manufacturer: GATES
- for OE number: 1J0412331
- Fitting Position: Front Axle
- Required quantity: 2
-
Material: Rubber/
Metal - Inner Diameter [mm]: 26
- Outer Diameter [mm]: 83
- Weight [g]: 273
- Supplementary Article/Info 2: without bearing
- Thickness [mm]: 54
- Name: IM 32354
- Manufacturer: ORIGINAL IMPERIUM
- Model Year from: 2013
-
for PR number: 1JP,
1JS, UA2, UB1, UB7, UB9, UB5 - Block Separation:
- Production date from: 08.07.2013
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount - Housing Type: Aluminium Housing
- Quantity per axle: 2
- Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Suspension: for vehicles without electronic suspension control
- SVHC: No SVHC present!
- Name: LU 815008930
- Manufacturer: FAG
- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: without ball bearing
-
Alternative Repair Kit: 25346 01,
36957 01 -
for OE number: 1J0 412 331,
1J0 412 331 B, 1J0 412 331 C -
Name: Laager -
Kndmik. VW P. GOLF 4 (BEZ O½YSKA) - Manufacturer: LMI
- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: without ball bearing
-
Alternative Repair Kit: 802 270,
802 697 -
for OE number: 1J0 412 331,
1J0 412 331 B, 1J0 412 331 C - Manufacturer: SACHS AMORTYZATORY
- Construction Year from: 07.2013
- Suspension: for vehicles with sports suspension
-
Fabrication Number: AD-
VV- 005 - Manufacturer: NTY
Fitting Position: Rear Axle, Front Axle Left, Front Axle Right, Front Axle
- Quantity: 2
- Weight [kg]: 0.237
- Fitting Position: Front Axle
- Thickness [mm]: 54
- Required quantity: 2
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 83
-
Material: Rubber/
Metal - Supplementary Article/Info 2: without ball bearing
- General Information: Shock absorber top rubber; front
- Manufacturer: BORSEHUNG
-
Fitting Position: Front Axle Left,
Front Axle Right
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
- not for vehicle type: Cupra
- Fitting Position: Rear Axle
- Manufacturer: ASHIKA
- Construction Year from: 09.2010
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Required quantity: 2
- Supplementary Article/Info 2: without bearing
- Name: COC 80004690
- Manufacturer: CORTECO
- not for vehicle type: Cupra
- Fitting Position: Front Axle
- Name: CFD PK0211
- Manufacturer: DACO
- Fitting Position: Front Axle
- Name: CFD PK4710
- Manufacturer: DACO
- not for vehicle type: Cupra
- Fitting Position: Rear Axle
- Manufacturer: JAPKO
- Lisainfo: 1590935 JAPKO
- Additional information: 1590935 JAPKO
- Fitting Position: Rear Axle both sides
- Name: CFD 150206
- Manufacturer: DACO
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: AB-
VW- 025K - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle
- Weight [kg]: 0.28
- Required quantity: 2
- Manufacturer: TEDGUM
- Inner Diameter [mm]: 26
- Height [mm]: 53
- Outer Diameter [mm]: 83
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.317
- Supplementary Article/Info 2: with ball bearing
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - Kndmik. VW P. GOLF 4 98- KPL. Z O½YSKIEM
- Quantity: 2
- Fitting Position: Front Axle
- Weight [kg]: 0.237
- Required quantity: 2
- Thickness [mm]: 54
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 83
-
Material: Rubber/
Metal - Supplementary Article/Info 2: without ball bearing
- General Information: Shock absorber rubber kit; front
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MAX
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
-
for OE number: 1J0513353G,
1J0513353B, 6R0513353 - Fitting Position: Rear Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
- Suspension: for vehicles with sports suspension
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Required quantity: 2
- Supplementary Article/Info 2: without bearing
- Weight [kg]: 0.28
- Manufacturer: CORTECO
- Name: COC 80000230
- Fitting Position: Front Axle
- for OE number: 1H0412303B
- Manufacturer: KAMOKA AMORTYZATORY
- Quantity: 2
- Fitting Position: Front Axle
- General Information: deep groove ball thrust bearing; front
- Manufacturer: BORSEHUNG
-
Fitting Position: Front Axle Left,
Front Axle Right -
Material: Rubber/
Metal - Supplementary Article/Info 2: with bearing
- Required quantity: 2
- Height [mm]: 53
- Outer Diameter [mm]: 83
- Centering Diameter [mm]: 14.2
- Manufacturer: TRW
for OE number: 1J0 412 249, 1J0 412 331 B, 1J0 412 331 C, 357 412 249 A, 6K0 413 031 B
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without bearing
-
Mounting Type: Rubber-
Metal Mount - Required quantity: 2
- replacement in pairs recommended:
- Name: Vedruamordi tugilaager
- Manufacturer: MEY
- Suspension: for vehicles without electronic suspension control
- Fitting Position: Rear Axle
-
Name: Laager -
Kndmik. VW T. GOLF 4/ B - Manufacturer: MAX
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left -
Manufacturer: AUTO-
GH
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Shape: round
- Manufacturer: JP GROUP
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left -
Manufacturer: AUTO-
GH
- Model Year from: 2013
-
for PR number: 1JP,
1JS, UA2, UB1, UB7, UB9 -
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper - Quantity per axle: 2
- Replace in pairs only:
- Supplementary Article/Supplementary Info: Rolling Bearing is not required
- for OE number: 1J0 513 353 C
- Housing Type: Aluminium Housing
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Shape: round
- Name: CFD PK4720
- Manufacturer: DACO
- Vehicle Identification Number (VIN) from: ******6J*B*059761
-
for PR number: UA2,
UB1 - Block Separation:
- Length [mm]: 126
- Inner Diameter [mm]: 11
- Height [mm]: 57
- Outer Diameter [mm]: 63
-
Material: Rubber/
Metal - Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.28
- Supplementary Article/Info 2: without ball bearing
- Observe service information:
- Name: Vedruamordi tugilaager
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Right,
Front Axle Left - Manufacturer: 3RG
- not for vehicle type: Cupra
- Fitting Position: Front Axle
- Manufacturer: ASHIKA
- Construction Year from: 03.2013
- Suspension: for vehicles with sports suspension
- for PR number: UB1
-
Fitting Position: Front Axle Left,
Front Axle Right -
Material: Rubber/
Metal - Supplementary Article/Info 2: without bearing
-
Fabrication Number: AD-
VV- 003 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - for OE number: 1J0 513 353 A
- Manufacturer: GSP ZAWIESZENIE
- for OE number: 1J0513353D
- Fitting Position: Rear Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MAX
-
Lisainfo: 72-
2698 -
Additional information: 72-
2698
- Fitting Position: Front Axle
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- not for vehicle type: Cupra
- Fitting Position: Front Axle
- Manufacturer: JAPKO
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
- Shape: round
- for OE number: 1J0513425
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MAX
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
-
Fabrication Number: AB-
MZ- 034K - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Suspension: for vehicles with sports suspension
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Article number of recommended accessories: 512242,
512214, 510072, 510339, 512243, 533864 - Manufacturer: GSP ZAWIESZENIE
- Fitting Position: Rear Axle
- Weight [kg]: 0.36
-
Material: Aluminium,
Rubber/ Metal - Weight [g]: 360
- Manufacturer: METALCAUCHO
- for OE number: 1J0412331B
- Fitting Position: Front Axle
-
Material: Rubber/
Metal - Weight [g]: 276
- Supplementary Article/Info 2: with ball bearing
- Component Number: 2
- Bearing manufacturer: IMPERGOM
- Name: IM 37241
- Manufacturer: ORIGINAL IMPERIUM
- not for vehicle type: Cupra
- Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
- Suspension: for vehicles without electronic suspension control
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
-
for OE number: 1J0 513 353 B,
6R0 513 353, 6R0 513 353 B - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Name: Vedruamordi tugilaager
- Manufacturer: SAA
- Width [mm]: 80
-
Material: PU
(Polyurethane), Plastic - Fitting Position: Front Axle
- Manufacturer: MAX
Name: ZESTAW MONTA½OWY AMORTYZATORA VW P. BORA/VENTO/IBIZA 97- (ODBOJE OSONY)
- Quantity: 2
- Construction Year from: 05.2013
- Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit; rear
- Manufacturer: VIKA
- Construction Year from: 02.2012
- Construction Year to: 02.2013
- Suspension: for vehicles with sports suspension
- for PR number: UB9
- Inner Diameter [mm]: 11
- Material: Aluminium
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Hole Spacing [mm]: 102
- Weight [kg]: 0.28
- Supplementary Article/Info 2: without ball bearing
- Name: SW 30 54 0024
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Model Year from: 2016
- Suspension: for vehicles without electronic suspension control
-
for PR number: G55,
G57 -
for OE number: 1J0 412 331,
1J0 412 331 B, 1J0 412 331 C - Fitting Position: Front Axle both sides
- Supplementary Article/Info 2: without ball bearing
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A3/OCTAVIA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A3/OCTAVIA
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Right,
Front Axle Left - for OE number: 344417
- Manufacturer: AUTOFREN SEINSA
-
Name: SE D5-
048
- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: LMI
Name: Laager - Kndmik. VW P. GOLF 4 98- KPL. Z O½YSKIEM
- Fitting Position: Front Axle
- Technical Information: Suspension mounting + separated suspension bearing
- Manufacturer: KYB
Name: Laager - Kndmik. FORD P. GALAXY/ SEAT ALHAMBRA, CORDOBA, IBIZA II, INCA, TOLEDO/ VW CADDY II, CORRADO, GOLF III, IV, PASSAT, POLO, SHARAN,
- not for vehicle type: Cupra
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
- Quantity per axle: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: SACHS AMORTYZATORY
- Suspension: for vehicles with sports suspension
- for PR number: UB9
- Fitting Position: Rear Axle
- Weight [kg]: 0.37
- Supplementary Article/Info 2: without ball bearing
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 14
- for OE number: 1J0 412 331 C S1
-
Material: Rubber/
Metal - Fitting Position: Front Axle both sides
- Outer Diameter [mm]: 83
- Supplementary Article/Info 2: with bearing
- Name: Suspension strut support bearing left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A3/TT/SKODA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A3/TT/SKODA
(kvaliteediklass: PJ)"
- Suspension: for vehicles without electronic suspension control
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
-
for OE number: 1J0 513 353 B,
6R0 513 353, 6R0 513 353 B - Supplementary Article/Supplementary Info: Rolling Bearing is not required
- Manufacturer: LMI
Name: Laager - Kndmik. VW T. BORA/GOLF 4/FABIA/A2/OCTAVIA 96- LE/PR
- Fitting Position: Front Axle
-
Article number of recommended accessories: 510213S,
512244S, 510070, 512244 - Manufacturer: GSP ZAWIESZENIE
-
Fitting Position: Rear Axle,
Rear Axle both sides - Suspension: for vehicles with standard suspension
- Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
- for OE number: 1J0513353D
- Fitting Position: Rear Axle
- Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
- Name: MM APK0137
- Number of Parts [parts]: 2
-
Article number of the recommended special tool: Clas :
OM1112, Clas : OP3231 - Manufacturer: SNR
- Name: SN KB657.08
Fitting Position: Right, Left, Front Axle, Front Axle Right, Front Axle Left
- for OE number: 1J0513353D
- Fitting Position: Rear Axle
- Manufacturer: ASHIKA
- Fitting Position: Front Axle
- Weight [kg]: 0.4
- Supplementary Article/Info 2: with rolling bearing
- Guarantee: 5 years guarantee
- Packaging length [cm]: 8.1
- Packaging width [cm]: 8.1
- Packaging height [cm]: 9
- Manufacturer: MONROE
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
- Fitting Position: Rear Axle
- Weight [kg]: 0.28
- Required quantity: 2
-
Material: Aluminium,
Rubber/ Metal - General Information: Shock absorber upper cover
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Weight [g]: 280
- General Information: Shock absorber upper cover
- Manufacturer: BORSEHUNG
- Additional information: 1J0513353G BOR
- Lisainfo: 1J0513353G BOR
- for OE number: 1J0513353D
- Fitting Position: Rear Axle
- Manufacturer: KAVO PARTS
-
for OE number: 1J0513353G,
1J0513353B, 6R0513353 - Fitting Position: Rear Axle
-
Technical Information: Suspension mounting only
(no bearing) - Manufacturer: KYB
Name: Laager - Kndmik. AUDI T. A1, A2, A3, TT/ SEAT CORDOBA, IBIZA IV, V, LEON/ SKODA FABIA, OCTAVIA, ROOMSTER/ VW BORA, FOX, GOLF IV, NEW BEETL
-
Fitting Position: Rear Axle,
Rear Axle both sides - Suspension: for vehicles with sports suspension
- Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
IBIZA/LEON/FABIA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
IBIZA/LEON/FABIA
(kvaliteediklass: PJ)"
- Construction Year to: 07.2013
- Suspension: for vehicles with sports suspension
-
for PR number: UB5,
UB7 - Block Separation:
- Length [mm]: 125
- Inner Diameter [mm]: 29
- Height [mm]: 58
-
Material: Rubber/
Metal - Fitting Position: Rear Axle
- Weight [kg]: 0.3
- Supplementary Article/Info 2: with ball bearing
- Observe service information:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - Kndmik. VW T. BORA/GOLF 4/FABIA/A2/OCTAVIA 96- LE/PR
- Name: Shock absorber protection kit left+right
- Quality class: Q
Lisainfo: "Tootja: POLCAR
SEAT LEON (1M1)
(kvaliteediklass: Q)"
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Quantity: 2
- Manufacturer: KAVO PARTS
- Fitting Position: Front Axle
- Quantity per axle: 2
- General Information: SKF recommends always changing in pairs both sides
- Name: Vedruamordi tugilaager
- Manufacturer: SKF
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Rear Axle
- Weight [kg]: 0.3
- Supplementary Article/Info 2: without bearing
- Guarantee: 5 years guarantee
- Packaging length [cm]: 13.6
- Packaging width [cm]: 11.8
- Packaging height [cm]: 11.4
- Manufacturer: MONROE
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
- Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
- Name: MM APK0093
- Name: Shock absorber protection kit left+right
- Quality class: Q
Lisainfo: "Tootja: POLCAR
SKODA OCTAVIA (1U2)
(kvaliteediklass: Q)"
- Quantity per packing unit: 2
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: KYB
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Quantity: 2
- Manufacturer: KAVO PARTS
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: AUT
- Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI/VW/SKODA
(kvaliteediklass: PJ)"
- Construction Year to: 07.2013
- Suspension: for vehicles with sports suspension
-
for PR number: UB5,
UB7 - Block Separation:
- Length [mm]: 125
- Inner Diameter [mm]: 29
- Height [mm]: 58
-
Material: Rubber/
Metal - Fitting Position: Rear Axle
- Weight [kg]: 0.3
- Supplementary Article/Info 2: with ball bearing
- Name: SW 32 91 9274
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for PR number: G17
-
Material: PU
(Polyurethane), Rubber - Fitting Position: Front Axle
- Weight [kg]: 0.201
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Quantity per axle: 2
- General Information: SKF recommends always changing in pairs both sides
- Name:
- Manufacturer: SKF
- Fitting Position: Front Axle
- Weight [kg]: 0.4
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Front Axle
- Quantity Unit: Set
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MEY
Suspension: for vehicles with sports suspension, for vehicles with standard suspension
- for combined PR number: G18+G20
-
Material: PU
(Polyurethane), Rubber - Fitting Position: Front Axle
- Weight [kg]: 0.5
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- for OE number: 357413175A
- Weight [kg]: 0.3
- Guarantee: 5 years guarantee
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
- Suspension: for vehicles with sports suspension
- Number of Parts [parts]: 1
- Outer Diameter 1 [mm]: 62
- Width 1 [mm]: 58
- Width 2 [mm]: 126
- Manufacturer: SNR
- Name: SN KB957.04
Fitting Position: Right, Left, Rear Axle, Rear Axle Right, Rear Axle Left
-
Vehicle Identification Number (VIN) from: 6J-
B- 059761 -
for PR number: UA2,
UB1 - Fitting Position: Rear Axle
- Manufacturer: BILSTEIN
-
Name: BI 12-
226429 - Quality class: Q
- for OE number: 1J0513353D
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Required quantity: 2
-
Material: Aluminium,
Rubber/ Metal - Weight [g]: 311
- Name: IM 35085
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
- General Information: Rubber and dust cover kit;rear
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Shape: round
- Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Front Axle
- Weight [kg]: 35
- Shape: round
- Height of bump stop [mm]: 65
- Inner Diameter [mm]: 18
- Manufacturer: DENCKERMANN AMORTYZATORY
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 210
- Suspension: for vehicles with standard suspension
- Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane), Thermoplast - Weight [g]: 240
- Component Number: 4
- Name: IM 50599
- Manufacturer: ORIGINAL IMPERIUM
- for PR number: G17
-
Material: PU
(Polyurethane), Rubber - Fitting Position: Front Axle
- Weight [kg]: 0.201
- Name: SW 30 56 0029
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Weight [g]: 217
- Component Number: 4
- Name: IM 50131
- Manufacturer: ORIGINAL IMPERIUM
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: KYB
- Suspension: for vehicles with sports suspension
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Fitting Position: Rear Axle
- Quantity Unit: Set
- Shape: round
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
-
Fitting Position: Right,
Left, Rear Axle - Number of Parts [parts]: 1
- Width 1 [mm]: 57
- Outer Diameter 1 [mm]: 64
- Manufacturer: SNR
- Name: SN KB957.03
-
for PR number: G18,
G20 - Block Separation:
- Length [mm]: 300
- Width [mm]: 80
-
Material: PU
(Polyurethane), Plastic - Fitting Position: Front Axle
- Weight [kg]: 0.16
-
Name: Puhver,
vedrustus - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Shape: round
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
- Model Year to: 2011
-
for combined PR number: G17,
G19, G21, G24 - Fitting Position: Front Axle
- Weight [kg]: 0.352
- Packaging length [cm]: 8.2
- Packaging width [cm]: 8.2
- Packaging height [cm]: 5.2
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with ball bearing
- Quantity Unit: Set
- Manufacturer: MEY
-
Lisainfo: 1004122019/
S -
Additional information: 1004122019/
S
Name: Laager - Kndmik. AUDI P A1 (8X1, 8XA) (05/10-/)/ SEAT IBIZA V (6J1, 6J5, 6J8) (03/08-06/10), MII 10/11- KPL NA 1 STR ZE RUB¤
- Fitting Position: Rear Axle
- Quantity Unit: Set
- Shape: round
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
- Fitting Position: Rear Axle
- Quantity per packing unit: 2
- Weight [kg]: 0.4
- Shape: round
- Guarantee: 5 years guarantee
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
- Additional information: PK078 MONROE
- Lisainfo: PK078 MONROE
- Quantity: 2
- Fitting Position: Front Axle
- Quantity per axle: 2
- Alternative Repair Kit: 108 561
-
Mounting Type: Rubber-
Metal Mount - Supplementary Article/Info 2: without rolling bearing
- General Information: Shock absorber rubber kit; front
- Manufacturer: BORSEHUNG
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
-
Vehicle Identification Number (VIN) from: 6J-
B- 059761 -
for PR number: UA2,
UB1 - Fitting Position: Front Axle
-
Name: Laager -
Kndmik. VW P. GOLF 4 KPL. - Manufacturer: BIL
- Quality class: Q
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
- Construction Year to: 07.2013
- Suspension: for vehicles with sports suspension
-
for PR number: UB5,
UB7 - Block Separation:
- Fitting Position: Rear Axle
- Weight [kg]: 0.462
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Supplementary Article/Info 2: without ball bearing
-
Name: Remondikomplekt,
vedruamordi tugilaager - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with sports suspension
- Length [mm]: 218
- Width [mm]: 56
- Fitting Position: Rear Axle
- Weight [kg]: 0.288
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
- Name: Shock absorber protection kit left+right
- Quality class: Q
Lisainfo: "Tootja: BILSTEIN
AUDI/VW/SEAT/SKODA
(kvaliteediklass: Q)"
- Name: Shock absorber protection kit left+right
- Quality class: Q
Lisainfo: "Tootja: BILSTEIN
GOLF IV
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
- Manufacturer: BILSTEIN
-
Name: BI 11-
106470 - Quality class: Q
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control
Additional information: "Tootja: BILSTEIN
VW POLO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
VW POLO
(kvaliteediklass: Q)"
- Quantity: 2
- Fitting Position: Front Axle
- Weight [kg]: 0.237
- Required quantity: 2
- Thickness [mm]: 54
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 83
-
Material: Rubber/
Metal - Supplementary Article/Info 2: without ball bearing
- General Information: Rubber and dust cover kit
- Manufacturer: VIKA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks