• Fitting Position: Front Axle Left
• paired article number: 1144600880
• Manufacturer: JP GROUP
• Lisainfo: Tie rod end, left
• Additional information: Tie rod end, left

• Fitting Position: Front Axle Right
• paired article number: 1144600870
• Manufacturer: JP GROUP
• Lisainfo: Tie rod end, right
• Additional information: Tie rod end, right

• Fitting Position: Front Axle Right, outer
• Block Separation:
• paired article number: 5034781
• Thread Size: 16x1,5
• Thread Type: with right-hand thread
• Net weight [kg]: 0.46
• Name: Liigend - Roolimine VW GOLF 5
• Manufacturer: NK

Left-/right-hand drive vehicles: for right-hand drive vehicles, for left-hand drive vehicles

• Quantity per packing unit: 2
• Fitting Position: Rear Axle, both sides, Rear Axle Upper, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.231
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 5
• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Right, Rear Axle Left
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 97
• Overall Length [mm]: 109
• Bolt Head-/Nut Design: Male Hex
• Strength class: 10.9
• Spanner Size: 18
• Surface: Zink flake coated
• Axle: Independent wheel suspension
• Consult accessories list for recommended additional repairs:
• Name: Rattakalde korrektuurkruvi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity per packing unit: 20
• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Right, Rear Axle Left
• Bolt Head-/Nut Design: Male Hex
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 90
• Overall Length [mm]: 102
• Strength class: 10.9
• Spanner Size: 18
• Surface: Zink flake coated
• Axle: Independent wheel suspension
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left
• Thread Size: M16x1,5
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Right
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Right
• Length [mm]: 93
• Cone Size [mm]: 13
• paired article number: 9010262
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Length [mm]: 93
• Cone Size [mm]: 13
• paired article number: 9010263
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Length [mm]: 95
• Internal Thread [mm]: M16x1.5
• External Thread [mm]: M12x1.5
• Thread Type: with right-hand thread, with internal thread
• Thread Size 1: M16x1.5
• paired article number: SR9607
• Manufacturer: BGA

• Fitting Position: Front Axle Right
• Length [mm]: 95
• Internal Thread [mm]: M16x1.5
• External Thread [mm]: M12x1.5
• Thread Type: with right-hand thread, with internal thread
• Thread Size 1: M16x1.5
• paired article number: SR9606
• Manufacturer: BGA

• Fitting Position: Front Axle Right
• Length [mm]: 95
• Internal Thread [mm]: M16x1,5
• External Thread [mm]: M12x1,5
• Supplementary Article/Info 2: with self-locking nut
• paired article number: M-S0199
• Manufacturer: MERTZ

• Fitting Position: Front Axle Left
• Length [mm]: 95
• Internal Thread [mm]: M16x1,5
• External Thread [mm]: M12x1,5
• Supplementary Article/Info 2: with self-locking nut
• paired article number: M-S0200
• Manufacturer: MERTZ

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Fitting Position: Front Axle Right, outer
• Fabrication Number: SKZ-VW-008
• paired article number: SKZ-VW-007
• Manufacturer: NTY
• Name: NTY SKZ-VW-008

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Fitting Position: Front Axle Left, outer
• Fabrication Number: SKZ-VW-007
• paired article number: SKZ-VW-008
• Manufacturer: NTY
• Name: NTY SKZ-VW-007

• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, outer
• Thread Size: FM16X1.5
• Cone Size [mm]: 13.5
• Thread Size 2: MM12X1.5
• Manufacturer: OYODO

• Fitting Position: Front Axle Left, outer
• Thread Size: FM16X1.5 RHT
• Cone Size [mm]: 13.5
• Length [mm]: 96
• Thread Size 2: MM12X1.5 RHT
• paired article number: 230620
• Weight [kg]: 0.419
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Left, Front Axle Right
• External Thread [mm]: M16x1,5
• Internal Thread [mm]: M16x1,5
• Length [mm]: 311
• Manufacturer: MERTZ

• Fitting Position: Front Axle both sides
• Thread Size: MM16X1.5R
• Thread Size 1: MM16X1.5R
• Axle Joint Length [mm]: 311
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Right, outer
• Thread Size: FM16X1.5
• Cone Size [mm]: 13.5
• Thread Size 2: MM12X1.5
• Manufacturer: OYODO

• Fitting Position: Front Axle
• Fabrication Number: SDK-VW-003
• Manufacturer: NTY

• Fitting Position: Front Axle Right, outer
• Thread Size: FM16X1.5 RHT
• Cone Size [mm]: 13.5
• Length [mm]: 96
• Thread Size 2: MM12X1.5 RHT
• paired article number: 230619
• Weight [kg]: 0.413
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• paired article number: 69-0186
• Fitting Position: Front Axle Right
• Name: Liigend - Roolimine VW GOLF 5 PR
• Manufacturer: MAX
• Lisainfo: MGZ-301043
• Additional information: MGZ-301043

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 3C0423810A
• Thread Size 1: M16X1,5
• Thread Size 2: M16X1,5
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle Right
• paired article number: S070032
• Length [mm]: 95.5
• Cone Size [mm]: 13.5
• Thread Size 1: M12X1,5
• Thread Size 2: M16X1,5
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle Left
• paired article number: S070033
• Length [mm]: 95.5
• Cone Size [mm]: 13.5
• Thread Size 1: M12X1,5
• Thread Size 2: M16X1,5
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size 1: M16X1.5
• Thread Size 2: M16X1.5
• Manufacturer: OYODO

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size: M16x1.5
• Manufacturer: BGA

• Fitting Position: Front Axle Right, Front Axle Left
• Overall Length [mm]: 334
• External Thread 1 [mm]: M 16
• Thread Pitch 1 [mm]: 1.5
• External Thread 2 [mm]: M 16
• Thread Pitch 2 [mm]: 1.5
• Supplementary Article/Info 2: with nut
• DIN standards (Nuts): DIN 936 (thin hexagon nuts)
• Spanner Size: 24
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• paired article number: 69-0464
• Fitting Position: Front Axle Right
• Name: Liigend - Roolimine VW PASSAT/CADDY 04- PR
• Manufacturer: MAX

• Fitting Position: Front Axle Left
• Internal Thread [mm]: M 16 x 1,5
• Supplementary Article/Info 2: with nut
• paired article number: 110 174
• External Thread [mm]: M 12 x 1,5
• Length [mm]: 95
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Right
• Weight [kg]: 0.4
• Length [mm]: 90
• Thread Size 1: M12x1,50
• Thread Size 2: M16x1,50
• Manufacturer: 3RG

• Fitting Position: Front Axle Left, Front Axle Right
• Axle Joint Length [mm]: 310
• Thread Size 1: M16X1.5 RHT
• Thread Size 2: M16X1.5 RHT
• paired article number: 240375
• Weight [kg]: 0.665
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Internal Thread [mm]: M 16 x 1,5
• Supplementary Article/Info 2: with nut
• External Thread [mm]: M 12 x 1,5
• Length [mm]: 95
• paired article number: 110 173
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Right
• Thread Type: with right-hand thread
• Internal Thread [mm]: M 16x1,5
• paired article number: 49398596
• Name: COC 49398648
• Manufacturer: CORTECO

• Fitting Position: Front Axle Left
• Thread Type: with right-hand thread
• Internal Thread [mm]: M 16x1,5
• paired article number: 49398648
• Name: COC 49398596
• Manufacturer: CORTECO

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Tie rod, left/right
• Additional information: Tie rod, left/right

• Fitting Position: Front Axle Left, outer
• Block Separation:
• paired article number: 5034782
• Thread Size: 16x1,5
• Thread Type: with right-hand thread
• Net weight [kg]: 0.45
• Name: Liigend - Roolimine VW GOLF 5
• Manufacturer: NK

Left-/right-hand drive vehicles: for right-hand drive vehicles, for left-hand drive vehicles

• Quantity: 2
• Fitting Position: Front Axle, Front Axle both sides
• Length [mm]: 311
• Weight [kg]: 0.748
• Required quantity: 2
• External Thread [mm]: M16 x 1,5
• General Information: track rod
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size 1: 16x1,5
• Thread Type: with right-hand thread
• Length [mm]: 310
• Net weight [kg]: 0.7
• Name: Liigend - Roolimine VW A3/GOLF5/PASSAT 03- LE/PR
• Manufacturer: NK

• Fitting Position: Front Axle Left, Front Axle Right, Front Axle
• Guarantee: 3 years guarantee
• Weight [kg]: 0.78
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Fitting Position: 1st front axle right
• Length [mm]: 94
• Thread Size 1: M16x1.5
• Thread Size 2: M12x1.5
• paired article number: 22-91107-2
• Weight [kg]: 0.41
• Name: DY 22-91107-1
• Manufacturer: DYS

• Thread Size: M16x1.5
• Thread Type: with right-hand thread
• Cone Size [mm]: 13.3
• paired article number: TA1914
• Fitting Position: Front Axle Right
• Length [mm]: 120
• Width [mm]: 40
• Height [mm]: 80
• Manufacturer: DELPHI
• Name: DE TA1915

• Fitting Position: Front Axle Left
• paired article number: 80024AL
• Cone Size [mm]: 13.3, 16.4
• Length [mm]: 95
• Thread Size: M16 x 1,5, M12 x 1,5
• Name: ALT 80025AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Right
• paired article number: 80025AL
• Cone Size [mm]: 13.3, 16.4
• Length [mm]: 95
• Thread Size: M16 x 1,5, M12 x 1,5
• Name: ALT 80024AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Left
• Base body material: Steel
• Net weight [kg]: 0.438
• Thread Size: RHT M16x1.5
• Thread Size 1: RHT M16x1,5
• paired article number: G10.3030
• Name: OMG G10.3029
• Manufacturer: OMG

• Fitting Position: Front Axle Right
• Base body material: Steel
• Net weight [kg]: 0.44
• Thread Size: RHT M16x1.5
• Thread Size 1: RHT M16x1,5
• paired article number: G10.3029
• Name: OMG G10.3030
• Manufacturer: OMG

• Thread Size: M16x1.5
• Thread Type: with right-hand thread
• Cone Size [mm]: 13.3
• paired article number: TA1915
• Fitting Position: Front Axle Left
• Length [mm]: 120
• Width [mm]: 40
• Height [mm]: 80
• Manufacturer: DELPHI
• Name: DE TA1914

• Fitting Position: Front Axle Left
• Length [mm]: 94
• Weight [kg]: 0.412
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• paired article number: 53163
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle Right, Front Axle Left
• External Thread [mm]: M 16x1,5
• Name: COC 49398480
• Manufacturer: CORTECO

• Thread Size 2: M16x1.5
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 332
• Width [mm]: 37
• Height [mm]: 37
• Manufacturer: DELPHI
• Name: DE TA1905

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: Front Axle
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,5
• paired article number: QS4181/HQ
• Name: Liigend - Roolimine VW GOLF 5 PR
• Manufacturer: QUARO

• Fitting Position: Front Axle Right
• Thread Type: with right-hand thread
• Internal Thread [mm]: M 16x1,5
• paired article number: 49398852
• Name: COC 49398834
• Manufacturer: CORTECO

• Fitting Position: Front Axle Left
• Thread Type: with right-hand thread
• Internal Thread [mm]: M 16x1,5
• paired article number: 49398834
• Name: COC 49398852
• Manufacturer: CORTECO

• Fitting Position: Front Axle Left
• paired article number: KTR4055
• Manufacturer: KYB

• Fitting Position: Front Axle Right
• paired article number: KTR4056
• Manufacturer: KAYABA AMORTYZATORY

• Fitting Position: Front Axle Left, Front Axle Right
• Axle Joint Length [mm]: 311
• Thread Size 1: M16x1.5
• Thread Size 2: M16x1.5
• Weight [kg]: 0.66
• Name: DY 24-06103
• Manufacturer: DYS

• Fitting Position: Front Axle, Right
• Quantity: 1
• Weight [kg]: 0.41
• Length [mm]: 112
• Required quantity: 1
• Internal Thread [mm]: M16 x 1,5
• External Thread [mm]: M12 x 1,5
• General Information: Tie rod end; right
• Manufacturer: VIKA

• Fitting Position: Front Axle Right
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• for steering manufacturer: ZF
• paired article number: VKDY 311016
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: SKF
• Name: SK VKDY311017

• Fitting Position: Front Axle Left
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• for steering manufacturer: ZF
• paired article number: VKDY 311017
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: SKF
• Name: SK VKDY311016

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• paired article number: 37594
• Length [mm]: 112
• Internal Thread Size: M16 x 1,5
• External Thread Size: M12 x 1,5
• Fitting Position: Front Axle Left
• Weight [kg]: 0.41
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Name: Liigend - Roolimine VW PASSAT/CADDY
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 06/10
• Fitting Position: Front Axle Left
• Thread Size: M16x1,5
• for OE number: 1K0423811J
• paired article number: 9006637
• Manufacturer: SASIC

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• paired article number: 37593
• Length [mm]: 112
• Internal Thread Size: M16 x 1,5
• External Thread Size: M12 x 1,5
• Spanner Size: T40
• Fitting Position: Front Axle Right
• Weight [kg]: 0.41
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Name: Liigend - Roolimine VW PASSAT/CADDY
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 06/10
• Fitting Position: Front Axle Right
• Thread Size: M16x1,5
• for OE number: 1K0423812J
• paired article number: 9006638
• Manufacturer: SASIC

• Fitting Position: Front Axle both sides
• Length [mm]: 330
• Weight [kg]: 0.665
• Thread Size 1: M16X1,5
• Thread Size 2: M16X1,5
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• Thread Size 1: M16x1,5
• Thread Size 2: M16x1,5
• Axle Joint Length [mm]: 288
• Name: Liigend - Roolimine VW GOLF 5 LE/PR
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Thread Size 1: M16x1,5 A
• Thread Size 2: M16x1,5 A
• Axle Joint Length [mm]: 311
• SVHC: No SVHC present!
• Name: Sisemine rooliots,roolivarras
• Manufacturer: FAG

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• paired article number: 30 93 7594
• Length [mm]: 112
• Internal Thread Size: M16 x 1,5
• External Thread Size: M12 x 1,5
• Fitting Position: Front Axle Left
• Weight [kg]: 0.41
• Supplementary Article/Supplementary Info: with lock nut
• Name: SW 30 93 7593
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• paired article number: 30 93 7593
• Length [mm]: 112
• Internal Thread Size: M16 x 1,5
• External Thread Size: M12 x 1,5
• Spanner Size: T40
• Fitting Position: Front Axle Right
• Weight [kg]: 0.41
• Supplementary Article/Supplementary Info: with lock nut
• Name: SW 30 93 7594
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• paired article number: ADV188707
• Length [mm]: 95
• Internal Thread Size: M16 x 1,5
• External Thread Size: M12 x 1,5
• Fitting Position: Front Axle Right
• Weight [kg]: 0.44
• Supplementary Article/Supplementary Info: with lock nut
• Manufacturer: BLUE PRINT ZAWIESZENIE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Model Year from: 2011
• Fitting Position: Front Axle
• Weight [kg]: 0.705
• Thread Size 1: M16x1,5
• Thread Size 2: M16x1,5
• Packaging length [cm]: 34
• Packaging width [cm]: 4.5
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Manufacturer: KYB

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with nut
• Manufacturer: FAST

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• paired article number: ADV188708
• Length [mm]: 95
• Internal Thread Size: M16 x 1,5
• External Thread Size: M12 x 1,5
• Fitting Position: Front Axle Left
• Weight [kg]: 0.4
• Supplementary Article/Supplementary Info: with lock nut
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• paired article number: 26096
• Length [mm]: 95
• Internal Thread Size: M16 x 1,5
• External Thread Size: M12 x 1,5
• Fitting Position: Front Axle Right
• Weight [kg]: 0.4
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• paired article number: 26097
• Length [mm]: 95
• Internal Thread Size: M16 x 1,5
• External Thread Size: M12 x 1,5
• Fitting Position: Front Axle Left
• Weight [kg]: 0.4
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Name: Liigend - Roolimine VW GOLF 5
• Manufacturer: FEB