• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Protective Cap/Bellow, shock absorber
• Additional information: Protective Cap/Bellow, shock absorber

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Vehicle Equipment: for vehicles without level control
• Fitting Position: Rear Axle
• Material: Thermoplast
• Height [mm]: 180
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Height [mm]: 206
• Manufacturer: MAX
• Lisainfo: 72-2185
• Additional information: 72-2185

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• Quantity: 2
• Fitting Position: Rear Axle
• General Information: protective pipe; rear
• Manufacturer: VIKA

• for PR number: 1JA, 1JC
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

Suspension: for vehicles with standard suspension, for vehicles with sports suspension General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Production date from: 06/10
• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• Height [mm]: 206
• for OE number: 6N0413175A
• Manufacturer: SASIC

• Special Purpose Vehicle: for taxis
• Suspension: for vehicles without electronic suspension control
• for PR number: 1JA, 1JC
• Block Separation:
• Thickness [mm]: 240
• Inner Diameter [mm]: 64
• Material: PE (Polyethylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 2
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Material: Thermoplast
• Required quantity: 2
• Outer Diameter [mm]: 68, 80
• General Information: protective pipe; front
• Manufacturer: VIKA

• for OE number: 6N0413175A
• Fitting Position: Front Axle
• Height [mm]: 193
• Material: Thermoplast
• Weight [g]: 68
• Diameter 1 [mm]: 63.6
• Diameter 2 [mm]: 74
• Name: IM 37485
• Manufacturer: ORIGINAL IMPERIUM

• Inner Diameter 2 [mm]: 72
• Inner Diameter 1 [mm]: 63
• Height [mm]: 198
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Required quantity: 2
• Manufacturer: TEDGUM

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Height [mm]: 206
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: SW 30 93 6006
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Model Year from: 2011
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye
• Weight [kg]: 0.144
• Packaging length [cm]: 4.2
• Packaging width [cm]: 4.2
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Weight [kg]: 0.108
• Packaging length [cm]: 19
• Packaging width [cm]: 7.8
• Packaging height [cm]: 7.8
• Height [mm]: 200
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: DACO GERMANY

• Fitting Position: Rear Axle
• Suspension: for vehicles without electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• max. length [mm]: 593
• Shock Absorber Design: Spring-bearing Damper
• Name: CFD 564773
• Manufacturer: DACO

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA

• Fabrication Number: A-AU-017
• Fitting Position: Rear Axle Left, Rear Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Observe technical data:
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Damper without Rebound Spring
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-2504
• Name: AMORT
• Manufacturer: MAX

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Piston Rod Diameter [mm]: 25
• Name: CFD 454722
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: JPA

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Fabrication Number: A-VW-013
• Manufacturer: NTY

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-692207
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Suspension Strut Outer Diameter [mm]: 55
• Name: GH 359961
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Manufacturer: DRIVE

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control

• Vehicle Equipment: for vehicles without level control
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-3359
• Name: Amort
• Manufacturer: MAX

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Housing Diameter [mm]: 55
• Manufacturer: OYODO

• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Name: MM 4320G

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Length [mm]: 338
• Manufacturer: DRIVE

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control

• Vehicle Equipment: for vehicles without level control
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Name: Amort
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Suspension: for vehicles without electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.7
• Bore Diameter [mm]: 30
• Length 1 [mm]: 370
• Length 2 [mm]: 593
• Piston Rod Diameter [mm]: 12.4, 13
• Observe service information:
• Article number of recommended accessories: MK203, PK078
• Packaging length [cm]: 50.5
• Packaging width [cm]: 6.4
• Packaging height [cm]: 6.4
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY
• Lisainfo: 1267250024
• Additional information: 1267250024

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Diameter 1/Diameter 2 [mm]: 25/55
• Article number of recommended accessories: SMA0148
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-196862
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Length [mm]: 338
• Name: AMORT
• Manufacturer: KYB
• Additional information: 344459
• Lisainfo: 344459

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Diameter 1/Diameter 2 [mm]: 25/55
• Article number of recommended accessories: SMJ0148
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO
• Lisainfo: MJ00031 JAPKO
• Additional information: MJ00031 JAPKO

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 25
• Diameter 2 [mm]: 55
• Spring Type: for vehicles with coil spring suspension
• Name: MM 4319G
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Diameter 1/Diameter 2 [mm]: 25/55
• Article number of recommended accessories: SM0148
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: JPA

• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Parameter: SEOV30/13X212A
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: SAA

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 55
• Piston Rod Diameter [mm]: 25
• Name: AMORT
• Manufacturer: KYB
• Additional information: KYB335808
• Lisainfo: KYB335808

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control Technical Information: Please refer to the technical drawing in "Documents"

• Name: Gas shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
SKODA/VW
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X160A
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles without electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.168
• Bore Diameter [mm]: 32
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK194, PK163
• Packaging length [cm]: 57.1
• Packaging width [cm]: 17
• Packaging height [cm]: 17
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV30/13X217A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• reinforced version:
• Name: AMORT
• Manufacturer: SAA

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-196859
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 55
• Piston Rod Diameter [mm]: 25
• Name: AMORT
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control Technical Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Length [mm]: 632
• Vehicle Equipment: for vehicles without level control
• Length 1 [mm]: 371
• Length 2 [mm]: 584
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN
• Name: BI 24-172936
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
VW/SKODA/SEAT
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
VW/SKODA/SEAT
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
AUDI A3/GOLF V ' 03-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI A3/GOLF V ' 03-
(kvaliteediklass: Q)"