Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
External Thread [mm]: M14x1,
5 - Length [mm]: 16
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Length [mm]: 24
-
External Thread Size: M14 x 1,
5 - Quality/ Grade: 5.8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 16
- Weight [kg]: 0.031
- Supplementary Article/Info 2: without seal ring
- Observe service information:
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Lisainfo: 99 90 3272 SWA Pikkus (mm): 23,8 Väliskeere [mm]: M14 x 1,5 Additional information: 99 90 3272 SWA Pikkus (mm): 23,8 Väliskeere [mm]: M14 x 1,5
- Quantity per packing unit: 25
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Material: Copper
- Shape: A Shape
- DIN/ISO: 7603
-
Alternative Repair Kit: 017.736,
505.550, 505.540 - Manufacturer: ELRING
- Lisainfo: 115.100 ELR
- Additional information: 115.100 ELR
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
-
DIN/ISO: 7603 A/
CU - Material: Copper
- Weight [kg]: 0.002
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 100
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Material: Copper
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Thread Size: M14x1,
5 - Length [mm]: 17
- Additionally required articles (article numbers): 259.150.100
- Spanner Size: 19 mm
- Length [mm]: 24
-
External Thread Size: M14 x 1,
5 - Quality/ Grade: 5.8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 16
- Weight [kg]: 0.031
- Supplementary Article/Info 2: without seal ring
- Manufacturer: FEBI BILSTEIN
- Lisainfo: 03272 FEBI
- Additional information: 03272 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 5
-
Article number of recommended accessories: V30-
2488 - Fitting Position: Oil Sump
- Thread Size: M10
- Bolt Head-/Nut Design: Hexagon Socket
- Supplementary Article/Info 2: without seal ring
- Required quantity: 1
- Thread Pitch [mm]: 1
- Weight [kg]: 0.012
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M14x1,
5 - Length [mm]: 17
- Spanner Size: 19 mm
- Supplementary Article/Info 2: with seal ring
-
Engine Code: ALM,
AEE - Length [mm]: 24
- Inner Diameter [mm]: 14.4
- Outer Diameter [mm]: 20
-
External Thread Size: M14 x 1,
5 - Quality/ Grade: 5.8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 16
- Weight [kg]: 0.033
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: ALM,
AEE - Length [mm]: 24
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
-
External Thread Size: M14 x 1,
5 - Quality/ Grade: 5.8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated, Phosphatized - Screw length below head [mm]: 16
- Weight [kg]: 0.32
- Supplementary Article/Info 2: with seal ring
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AEE
-
Thread Size: M14x1,
5 - Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Manufacturer: DR.MOTOR AUTOMOTIVE
- Quantity per packing unit: 10
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Alternatively:
- Manufacturer: FA1
-
Thread Size: M14x1,
5x16 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 19 mm
- Alternative Repair Kit: 878.070
- Supplementary Article/Info 2: without seal ring
- Manufacturer: ELRING
-
Thread Size: M14x1,
5x16 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 19 mm
- Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
- Supplementary Article/Info 2: with seal ring
-
Thread Size: M 14 x 1,
50 - Length [mm]: 16
- Packing Type: Blister Pack
- Manufacturer: CORTECO
- Quantity per packing unit: 100
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks