Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Material: Plastic
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Quantity per packing unit: 100
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Material: Plastic
- for OE number: 032121142
- Manufacturer: DELLO AUTOMEGA
-
Kaal (kg): 0,
015 - Materjal: Plastik
- vajaminev tükihulk: 1
- Üldine informatsioon: retaining spring
- Manufacturer: VIKA
-
Materjal: NBR
(Nitril- Butadien- Kautschuk) -
Kaal (kg): 0,
003 -
Jämedus/Tugevus (mm): 3,
5 -
Siseläbimõõt [mm]: 19,
5 - vajaminev tükihulk: 1
-
Üldine informatsioon: o-
ring - Manufacturer: VIKA
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Name: STOPPER
- Manufacturer: MAX
- Material: Plastic
- Weight [kg]: 0.015
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: ABU
- Construction Year to: 12.1996
- Thickness [mm]: 3
- Inner Diameter [mm]: 43
- Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Supplementary Info: with accessories
-
Name: SULGURKORK,
JAHUTUSVEDELIKUFLANTS - Manufacturer: MAX
- Housing material: Plastic
- Supplementary Article/Info 2: with seal ring
- for OE number: 030121121B
- Manufacturer: DELLO AUTOMEGA
-
Engine Code: ALM,
AEE - Weight [kg]: 0.02
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: ABU
- Material: Plastic
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Quantity per packing unit: 4
- Installatsiooni pool: küljepoolne sisseehitus
-
Kaal (kg): 0,
041 - Materjal: Plastik
- Piirangutega toode/piirangu info: koos tihendiga
- Kaal (g): 41
- Manufacturer: METALCAUCHO
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
Manufacturer: KAMOKA
- Construction Year to: 12.1999
- Thickness [mm]: 3.15
- Inner Diameter [mm]: 36
- Material: Rubber
- Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Kaal (kg): 0,
061 - Materjal: Plastik
- vajaminev tükihulk: 1
- Üldine informatsioon: pipe union
- Manufacturer: VIKA
-
Engine Code: AEE,
ALM - Material: Plastic
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
-
Fabrication Number: CTM-
AU- 007 - Manufacturer: NTY
-
Name: NTY CTM-
AU- 007
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: ABU
- Number of flange connections: 1
- Manufacturer: BGA
Manufacturer: KAMOKA
- Quantity per packing unit: 2
-
Kaal (kg): 0,
052 - Materjal: Plastik
- Kaal (g): 52
- Piirangutega toode/piirangu info 2: ilma termostaadita
- Manufacturer: METALCAUCHO
- Engine Code: ABU
- Material: Plastic
- Weight [kg]: 0.061
- for OE number: 030 121 121 B
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 037121145
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 45
- Supplementary Article/Info 2: without thermostat
- Name: IM 90186
- Manufacturer: ORIGINAL IMPERIUM
- Engine Code: ABU
- Housing material: Plastic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Manufacturer: VERNET
- for OE number: 030121121B
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 57
- Supplementary Article/Info 2: without thermostat
- Name: IM 90181
- Manufacturer: ORIGINAL IMPERIUM
- Engine Code: ABU
- Material: Plastic
- Weight [kg]: 0.061
- for OE number: 030 121 121 B
- Name: SW 32 92 3346
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Diameter 1 [mm]: 32
- for OE number: 030121121B
- Manufacturer: MEAT&DORIA
- for OE number: 030121121B
- Manufacturer: NRF
- Required quantity: 1
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 55
- Supplementary Article/Info 2: without thermostat
- Name: IM 90353
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 032121121J
- Material: Plastic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 63
- Supplementary Article/Info 2: without thermostat
- Name: IM 90242
- Manufacturer: ORIGINAL IMPERIUM
-
Engine Code: AEE,
ALM - Housing material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: VERNET
-
Fitting Position: Cylinder Head,
Rear - Weight [kg]: 0.038
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of flange connections: 1
- Number of mounting bores: 2
-
Name: KRàCIEC UKADU CHODZENIA VW POLO 95-
- Manufacturer: NRF
-
Kaal (kg): 0,
12 - Materjal: Plastik
- Kaal (g): 120
- Piirangutega toode/piirangu info 2: ilma termostaadita
- Manufacturer: METALCAUCHO
-
Kaal (kg): 0,
05 - Materjal: Plastik
- Kaal (g): 50
- Piirangutega toode/piirangu info 2: ilma termostaadita
- Manufacturer: METALCAUCHO
-
Fitting Position: Front,
Cylinder Head - Weight [kg]: 0.104
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Plastic
-
Supplementary Article/Info 2: with bolts/
screws -
Supplementary Article/Supplementary Info: with gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Left
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MEY
- Weight [kg]: 0.066
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ABU
- Housing material: Plastic
- Supplementary Article/Info 2: with seal ring
- for OE number: 030121117N
- Manufacturer: DELLO AUTOMEGA
- Üldine informatsioon: pipe union
- Manufacturer: VIKA
-
Supplementary Article/Supplementary Info: with gasket/
seal - Fitting Position: Front
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MEY
- Engine Code: ABU
- Fitting Position: Front
- Material: Plastic
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
-
Name: KRàCIEC UKADU CHODZENIA SEAT IBIZA 93-
- Manufacturer: NRF
- Engine Code: ABU
- Fitting Position: Engine
- Housing material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: VERNET
- Engine Code: ABU
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Supplementary Article/Info 2: with bolts/
screws - Weight [kg]: 0.22
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Esisild
- Versioon: 4 pins connector
- Avamistemperatuur (°C): 87
- Materjal: Plastik
- Manufacturer: METALCAUCHO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks