Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Vehicle Identification Number (VIN) to: 6K-
X- 290 000 - Fitting Position: Rear Axle
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Rear Axle
- Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 61
- Outer Diameter [mm]: 79.5
-
Supplementary Article/Info 2: for wheel bearing/
wheel hub - Width [mm]: 21
- Weight [kg]: 0.039
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Supplementary Article/Info 2: for wheel bearing/
wheel hub - Fitting Position: Rear Axle both sides
- Manufacturer: METZGER
-
Fitting Position: Front Axle Left,
Front Axle Right -
Thread Size: M12X1,
5 - for OE number: 357 407 615
- Outer Diameter [mm]: 120.5
- Rim Hole Number: 4
- Number of Teeth: 22
- Manufacturer: GSP
- Fitting Position: Rear Axle
- Height [mm]: 109
-
Fabrication Number: KLT-
VW- 000P3 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Quantity: 2
- Fitting Position: Rear Axle
- Weight [kg]: 0.81
- Number of Holes: 6
- Required quantity: 2
- General Information: Rear axle hub
- Manufacturer: VIKA
- Braking/Drive Dynamics: for vehicles without ABS
- Outer Diameter [mm]: 40
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.43
- for OE number: 357 407 615
- Supplementary Article/Info 2: without wheel bearing
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Braking/Drive Dynamics: for vehicles without ABS
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: KLP-
VW- 000P2 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
-
Supplementary Article/Supplementary Info: without fastening/
mounting material - Supplementary Article/Info 2: without wheel bearing
- Outer Diameter [mm]: 120
- Width [mm]: 40
- Bolt Hole Circle Ø [mm]: 100
- Rim Hole Number: 4
- Braking/Drive Dynamics: for vehicles without ABS
- Number of Teeth: 22
- Name: RATTARUMM
- Manufacturer: MEY
-
Supplementary Article/Supplementary Info: without fastening/
mounting material - Supplementary Article/Info 2: without wheel bearing
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Rim Hole Number: 4
- Braking/Drive Dynamics: for vehicles without ABS
-
Fitting Position: Front Axle Left,
Front Axle Right - Name: RATTARUMM
- Manufacturer: MAX
- Quantity: 1
- Fitting Position: Rear Axle
- Weight [kg]: 0.81
- Required quantity: 1
- General Information: Rear axle hub
- Manufacturer: VIKA
- old version:
- Outer Diameter [mm]: 40
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.435
- for OE number: 357 407 615 A
- Supplementary Article/Info 2: without wheel bearing
- Name: RATTARUMM
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: without wheel bearing
- Rim Hole Number: 4
- Braking/Drive Dynamics: for vehicles without ABS
-
Lisainfo: Wheel hub for disc brake,
front, 40 mm -
Additional information: Wheel hub for disc brake,
front, 40 mm
- Outer Diameter [mm]: 40
- Bolt Hole Circle Ø [mm]: 100
- Supplementary Article/Info 2: without wheel bearing
- for OE number: 357 407 615 A
-
Fitting Position: Front Axle Left,
Front Axle Right - Name: RATTARUMM
- Manufacturer: MAX
- Fitting Position: Front Axle both sides
- Height [mm]: 74
- Weight [kg]: 1.43
- Drum diameter [mm]: 40
- Inner Diameter [mm]: 22.9
- Outer Diameter [mm]: 120.5
- Number of Holes: 4
- Wheel Hub Diameter [mm]: 57
- Number of Teeth: 22
- Manufacturer: METALCAUCHO
-
Braking/Drive Dynamics: for vehicles with ABS,
for vehicles without ABS - Diameter [mm]: 40
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Fitting Position: Front Axle
- Weight [kg]: 1.613
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle both sides
- Height [mm]: 74
- Weight [kg]: 1.435
- Drum diameter [mm]: 65
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 120.5
- Number of Holes: 4
- Braking/Drive Dynamics: for vehicles with ABS
- Wheel Hub Diameter [mm]: 57
- Number of Teeth: 22
- Manufacturer: METALCAUCHO
- new version:
- Outer Diameter [mm]: 40
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Fitting Position: Front Axle
- Weight [kg]: 1.435
-
Supplementary Article/Info 2: without wheel bearing,
with ABS sensor ring - Name: RATTARUMM
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: without wheel bearing
- Rim Hole Number: 4
- Manufacturer: JP GROUP
-
Lisainfo: Wheel hub for disc brake,
front, 40 mm -
Additional information: Wheel hub for disc brake,
front, 40 mm
- Fitting Position: Rear Axle Left
- Height [mm]: 110
- Weight [kg]: 0.88
- Drum diameter [mm]: 44
- Manufacturer: METALCAUCHO
- Bolt Hole Circle Ø [mm]: 100
- Diameter [mm]: 40
- Supplementary Article/Info 2: with ABS sensor ring
- Number of Holes: 4
- Fitting Position: Front Axle
- Weight [kg]: 1.497
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Height [mm]: 74
- Weight [kg]: 1.435
- Drum diameter [mm]: 65
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 120.5
- Number of Holes: 4
- Wheel Hub Diameter [mm]: 57
- Supplementary Article/Info 2: with ABS sensor ring
- Number of Teeth: 22
- Manufacturer: METALCAUCHO
- Fitting Position: Rear Axle Left
- Braking/Drive Dynamics: for vehicles with ABS
- Brake Type: Drum Brake
- Manufacturer: METZGER
- Required quantity: 2
- Braking/Drive Dynamics: for vehicles without ABS
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks