• Construction Year to: 04.2015
• Supplementary Article/Supplementary Info: with seal
• Lisainfo: Water pump
• Additional information: Water pump

Lisainfo: (AM) Mehaaniline pump vana andur ei sobi

• Construction Year from: 05.2015
• Operating Mode: Mechanical
• Manufacturer: JP GROUP
• Lisainfo: Water Pump
• Additional information: Water Pump

• Number of Teeth: 19
• Water Pump Type: for timing belt drive
• for OE number: 03L 121 011
• Manufacturer: KAMOKA

• Transmission Type: 6-Speed Manual Transmission
• Fabrication Number: CPW-VW-051
• Manufacturer: NTY

• Supplementary Article/Supplementary Info: with seal
• Number of blades/vanes: 7
• Seal Material: Rubber
• Water pump impeller material: Metal
• Manufacturer: KAMOKA

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Number of Teeth: 19
• Name: VEEPUMP
• Manufacturer: MAX

• reinforced version:
• Model Year from: 2009
• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.68
• Manufacturer: AKSDASIS

• Construction Year from: 01.2013
• Water Pump Type: for timing belt drive
• Water pump impeller material: Thermoplast
• Supplementary Article/Info 2: with water pump seal ring
• Operating Mode: Mechanical
• Manufacturer: ASHIKA

• Overall Height [mm]: 98
• Diameter [mm]: 54
• Manufacturer: JAPKO

• Overall Height [mm]: 98
• Diameter [mm]: 54
• Manufacturer: ASHIKA

• Service exchange part:
• Construction Year to: 04.2015
• Supplementary Article/Info 2: with evaporator
• reinforced version:
• Model Year from: 2009
• Manufacturer: DOLZ
• Name: DO A224

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.2013
• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: with seal ring
• Quality class: PJ
• Name: Water pump

• Trim Level: TB
• for OE number: 03L121011PX
• Belt Pulley Ø [mm]: 56
• Height 1 [mm]: 28.5
• Weight [kg]: 1.1
• Name: DA DP206
• Manufacturer: DAYCO

• Construction Year from: 05.2015
• Weight [kg]: 0.722
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Manufacturer: CONTITECH

• Construction Year from: 01.2013
• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 8
• Water Pump Pulley Ø [mm]: 56.23
• Impeller Diameter [mm]: 63.4
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Name: VEEPUMP
• Manufacturer: GRA

• Supplementary Article/Supplementary Info: with seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• Quality: Sealed with SiC/SiC
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Operating Mode: Electric
• Voltage [V]: 12
• Name: Lisaveepump (jahutusvee ringlusssteem)
• Manufacturer: MAX

• Construction Year from: 01.2013
• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 8
• Water Pump Pulley Ø [mm]: 56.23
• Impeller Diameter [mm]: 63.4
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Manufacturer: METELLI

• Construction Year to: 04.2015
• Weight [kg]: 0.76
• Name: AI 1992
• Manufacturer: AIRTEX

• for OE number: 6R0 965 561 A
• Manufacturer: KAMOKA

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.725
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Name: SW 30 93 6048
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA
• Lisainfo: 538006010
• Additional information: 538006010

• Fabrication Number: EZC-VW-438
• Manufacturer: NTY
• Name: NTY EZC-VW-438

• Engine Code: CAYC, CLNA
• Block Separation:
• Operating Mode: Mechanical
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Name: VEEPUMP
• Manufacturer: PIE

• Construction Year to: 04.2015
• Vehicle Equipment: for vehicles with auxiliary water pump
• Operating Mode: Electric
• Fitting Position: Left
• Fabrication Number: CPZ-VW-001
• Manufacturer: NTY

• Supplementary Article/Supplementary Info: with seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• reinforced version:
• Quality: Sealed with SiC/SiC
• Water pump impeller material: Metal
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Housing material: Stainless Steel
• Chemical Properties: Heat-resistant
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Operating Mode: Electric
• Voltage [V]: 12
• Lisainfo: Additional Water Pump
• Additional information: Additional Water Pump

• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Manufacturer: SKF
• Name: SK VKPC81269

• Construction Year from: 06.2015
• Engine Code: CAYC, CLNA
• Block Separation:
• Operating Mode: Electric
• Voltage [V]: 12
• Name: Lisaveepump (jahutusvee ringlusssteem)
• Manufacturer: MAX

• for OE number: 2Q0 965 567
• Manufacturer: KAMOKA

• Construction Year to: 07.2017
• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Weight [kg]: 0.75
• Name: VEEPUMP
• Manufacturer: VAL

• Construction Year from: 05.2015
• Weight [kg]: 0.7
• Operating Mode: Mechanical
• Version: NON SWITCHABLE
• Name: AI 2131
• Manufacturer: AIRTEX

• for OE number: 04L 121 011 EX
• Supplementary Article/Supplementary Info: without integrated regulator
• Supplementary Article/Info 2: without integrated disabling contact
• Operating Mode: Mechanical
• Manufacturer: TRUCKTEC

• Operating Mode: Electric
• Supplementary Article/Info 2: with mounting parts
• Manufacturer: NRF

• Fabrication Number: CPZ-VW-019
• Operating Mode: Electric
• Manufacturer: NTY

• Packaging length [cm]: 17.8
• Packaging width [cm]: 11.4
• Packaging height [cm]: 11.4
• Weight [kg]: 0.68

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of blades/vanes: 6
• Weight [kg]: 0.924
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: Veepump
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Trim Level: AUX
• for OE number: 6R0965561A
• Operating Mode: Electric
• Name: Lisaveepump
• Manufacturer: DAY

• Engine Code: CAYC, CLNA
• Name: Lisaveepump
• Manufacturer: MAG

• Engine Code: CAYC
• Construction Year from: 05.2015
• for OE number: 04L 121 011
• Manufacturer: FAI AUTOPARTS

Supplementary Article/Info 2: without integrated disabling contact, without sensor

• Connector Shape: oval
• Material: Plastic
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: NISSENS

• Construction Year from: 05.2015
• Weight [kg]: 0.91
• Specification: AIRTEX SW PATENTED
• Operating Mode: Electric-hydraulic
• Version: SWITCHABLE
• Supplementary Article/Info 2: without integrated disabling contact
• Name: AI 1978
• Manufacturer: AIRTEX

• Number of Teeth: 145
• Width [mm]: 25
• Weight [kg]: 2.05
• for article number: A255
• Manufacturer: DOLZ
• Name: DO KD153

• Weight [kg]: 0.329
• Packaging height [cm]: 16
• Packaging width [cm]: 13
• Packaging length [cm]: 13
• Operating Mode: Electric
• Name: Lisaveepump (jahutusvee ringlusssteem)
• Manufacturer: CON

• Number of Teeth: 160
• Width [mm]: 25
• Number of belts: 1
• Weight [kg]: 2.28
• for article number: A224
• Manufacturer: DOLZ
• Name: DO KD100

• Construction Year from: 05.2015
• Connector Shape: oval
• Material: Plastic
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: NISSENS

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as brackets in the box when mounted in exposed position

• Engine Code: CAYC, CLNA
• Block Separation:
• Construction Year to: 05.2015
• Number of connectors: 3
• Weight [kg]: 0.26
• for OE number: 6R0 965 561 A
• Name: Lisaveepump
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth: 160
• Width [mm]: 25
• Number of belts: 1
• for article number: 570043N
• Packaging length [cm]: 28
• Packaging width [cm]: 17.5
• Packaging height [cm]: 17.5
• Weight [kg]: 2.442
• Manufacturer: AKSDASIS

• Operating Mode: Electric
• Voltage [V]: 12
• Name: LISAVEEPUMP
• Manufacturer: PIE

• Construction Year from: 10.2013
• Construction Year to: 05.2015
• Operating Mode: Electric
• Voltage [V]: 12
• Pressure [bar]: 0.1
• Flow rate [l/h]: 680
• Manufacturer: BOSCH

• Construction Year to: 04.2015
• Number of belts: 1
• Weight [kg]: 2.77
• Name: AI WPK-199201
• Manufacturer: AIRTEX

• Driven Units: Camshaft
• Trim Level: HT -KTBWP
• Number of Teeth: 160
• Width [mm]: 25
• Length [mm]: 1,524
• Number of belts: 1
• Pulleys contained: 4
• Weight [kg]: 3.1
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY
• Additional information: KTBWP7880 DAYCO
• Lisainfo: KTBWP7880 DAYCO

• Construction Year from: 10.2013
• Construction Year to: 05.2015
• Length [mm]: 1,524
• Number of Teeth: 160
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 4
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: BOS

• Width [mm]: 25
• Number of Teeth: 160
• Surface: Coated
• Belts: with rounded tooth profile
• Weight [kg]: 2.63
• for OE number: 03L 198 119 F S1
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 4
• Number of Teeth 1: 160
• Manufacturer: SNR
• Name: SN KDP457.720

• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 2
• Water pump impeller material: Plastic
• Belt Width [mm]: 25
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 160
• Manufacturer: SKF
• Name: SK VKMC01148-2
• Lisainfo: VKMC 01148-2 SKF
• Additional information: VKMC 01148-2 SKF

• Construction Year from: 01.2013
• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Water Pump Type: for timing belt drive
• Manufacturer: BUGATTI

• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA
• Lisainfo: 530055032
• Additional information: 530055032

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4840A, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT
• Lisainfo: KP25649XS-1 GAT
• Additional information: KP25649XS-1 GAT

• Construction Year from: 01.2013
• Number of Teeth 1: 160
• Width 1 [mm]: 25
• Water Pump Type: for timing belt drive
• Manufacturer: GRAF

• Construction Year from: 06.2015
• Engine Code: CAYC, CLNA
• Block Separation:
• for OE number: 5Q0 965 561 B
• Operating Mode: Electric
• Voltage [V]: 12
• Name: LISAVEEPUMP
• Manufacturer: PIE

• Driven Units: Camshaft, Water Pump
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 160
• Weight [kg]: 2.622
• Width [mm]: 25
• Supplementary Article/Supplementary Info: with camshaft screws
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON

Technical Information: According to VW AG, date restrictions can deviate., Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Packaging length [cm]: 17.8
• Packaging width [cm]: 11.4
• Packaging height [cm]: 11.4
• Weight [kg]: 0.76
• Manufacturer: AKSDASIS

• Number of Teeth: 145
• Width [mm]: 25
• Weight [kg]: 2.12
• for article number: A255V
• Manufacturer: DOLZ
• Name: DO KD153V

• Driven Units: Camshaft, Water Pump
• Width [mm]: 25
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with water pump
• Pulleys contained: 4
• Supplementary Article/Info 2: with fastening material
• Number of belts: 1
• Number of Teeth: 160
• Weight [kg]: 3.383
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Driven Units: Camshaft, Water Pump
• Pulleys contained: 4
• Number of belts: 1
• Width [mm]: 25
• Number of Teeth: 160
• Operating Mode: Mechanical
• Weight [kg]: 7.159
• Manufacturer: VAICO

Supplementary Article/Supplementary Info: with attachment material, with coolant, with water pump General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.