Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Protective Cap/
Bellow, shock absorber -
Additional information: Protective Cap/
Bellow, shock absorber
- Fitting Position: Rear Axle both sides
- General Information: protective pipe
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle both sides
- General Information: dust boot
- Manufacturer: BORSEHUNG
- Thickness [mm]: 230
- Material: Thermoplast
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.07
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 230
- Material: Thermoplast
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Name: SW 30 94 5893
- Manufacturer: SWAG
- Lisainfo: 30 94 5893 SWA
- Additional information: 30 94 5893 SWA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Thickness [mm]: 172
- Material: Thermoplastic polyester elastomer
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.07
- Manufacturer: FEBI
- Lisainfo: 46720 FEBI
- Additional information: 46720 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Fabrication Number: A-
AU- 032 - Manufacturer: NTY
- Fitting Position: Rear Axle
- Construction Year to: 10.2017
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube -
Axle: Four-
Link Axle - Manufacturer: DENCKERMANN AMORTYZATORY
- Lisainfo: DSF211G DKM
- Additional information: DSF211G DKM
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Diameter [mm]: 45
- Length [mm]: 630
- Manufacturer: KAVO
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Manufacturer: KAMOKA
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Manufacturer: KAVO PARTS
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Piston Rod Diameter [mm]: 13
- Shock absorber eyelet diameter [mm]: 59
- max. length [mm]: 625
- Manufacturer: KAYABA AMORTYZATORY
- Additional information: 3448024 KAYABA
- Lisainfo: 3448024 KAYABA
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Weight [kg]: 1.836
- Length 1 [mm]: 409
- Length 2 [mm]: 631
-
Article number of recommended accessories: MK503,
PK424, PK472 - Packaging length [cm]: 60
- Packaging width [cm]: 7
- Packaging height [cm]: 7.2
- Manufacturer: MONROE
Guarantee: 5 years guarantee with accessories when replaced in pairs
- Fitting Position: Front Axle
- Construction Year to: 10.2017
- Amorditüüp: Gaasirõhk
- Amort-Ehitusliik: Vedruamort
- Amort-süsteem: kaks toru
- Amort-kinnitusliik: ülemine tihvt
- Manufacturer: OYODO
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Manufacturer: KAYABA
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Construction Year to: 10.2017
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: SEOV30/
13X170A -
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Axle: Four-
Link Axle - Manufacturer: SACHS
- Lisainfo: 318 202
- Additional information: 318 202
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Weight [kg]: 4.43
- Bore Diameter [mm]: 32
- Observe technical data:
- Length 1 [mm]: 382
- Length 2 [mm]: 549
- Piston Rod Diameter [mm]: 22
-
Article number of recommended accessories: MK411,
PK468 - Packaging length [cm]: 56.8
- Packaging width [cm]: 17.2
- Packaging height [cm]: 17.2
- Housing diameter in clamping area [mm]: 55
- Manufacturer: MONROE
Guarantee: 5 years guarantee with accessories when replaced in pairs
- Fitting Position: Front Axle
- Construction Year to: 07.2018
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: ST36/
25X167A - Shock Absorber Mounting Type: Top pin
- Housing Diameter [mm]: 55
- Manufacturer: SACHS
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper without Rebound Spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Fabrication Number: A-
VW- 004 - Shock Absorber System: Electronically adjustable shock strength
- Braking/Driving Dynamics: for vehicles with DCC suspension
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle Left,
Front Axle Right - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Fabrication Number: A-
VW- 003 -
Shock Absorber System: Twin-
Tube - Suspension: for vehicles with electronic suspension control
- Braking/Driving Dynamics: for vehicles with DCC suspension
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Top pin
- Length [mm]: 677
-
Axle: Multi-
link Axle - for PR number: 0N4
- Shock Absorber System: Monotube
- Manufacturer: BILSTEIN
-
Name: BI 24-
229890
Suspension: for vehicles with standard suspension, for vehicles with lowered suspension
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Suspension: for vehicles with electronic suspension control
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Shock Absorber Type: Gas Pressure
-
Article number of recommended accessories: GH-
369964, GH- 399961, GH- 693610 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Suspension Strut Outer Diameter [mm]: 55
- Weight [kg]: 5.568
- Operating Mode: Electronic
-
Manufacturer: AUTO-
GH - Name: GH 359967
Shock Absorber System: Twin-Tube, Electronically adjustable shock strength
- Fitting Position: Front Axle
- Suspension: for vehicles with electronic suspension control
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Electronically adjustable shock strength
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Weight [kg]: 5.568
- Operating Mode: Electronic
- Guarantee: 5 years guarantee
- Packaging length [cm]: 59.1
- Packaging width [cm]: 20.7
- Packaging height [cm]: 21.2
- Manufacturer: MONROE
- Fitting Position: Rear Axle
- Suspension: for vehicles with electronic suspension control
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper without Rebound Spring
- Shock Absorber System: Electronically adjustable shock strength
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Weight [kg]: 4.2
- Operating Mode: Electronic
- Guarantee: 5 years guarantee
- Packaging length [cm]: 69.6
- Packaging width [cm]: 13.3
- Packaging height [cm]: 13.6
- Manufacturer: MONROE
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Housing diameter in clamping area [mm]: 55
- Shock Absorber System: Single Tube Upside Down
-
Name: BI 35-
274018 - Manufacturer: BILSTEIN
- Suspension: for vehicles with lowered suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Housing diameter in clamping area [mm]: 55
- Shock Absorber System: Single Tube Upside Down
-
Name: BI 35-
267126 - Manufacturer: BILSTEIN
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with electronic suspension control
- Length 1 [mm]: 372
- Length 2 [mm]: 550
- Housing diameter in clamping area [mm]: 55
-
Shock Absorber System: Twin-
Tube -
Name: BI 23-
238978 - Manufacturer: BILSTEIN
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Axle: Multi-
link Axle - Suspension: for vehicles with electronic suspension control
-
Shock Absorber System: Twin-
Tube - Manufacturer: BILSTEIN
-
Name: BI 20-
267520
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with electronic suspension control
- Housing diameter in clamping area [mm]: 55
-
Shock Absorber System: Twin-
Tube -
Name: BI 23-
254343 - Manufacturer: BILSTEIN
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Axle: Multi-
link Axle - Suspension: for vehicles with electronic suspension control
-
Shock Absorber System: Twin-
Tube -
Name: BI 20-
267537 - Manufacturer: BILSTEIN
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks