• Length [mm]: 107
• Outer Diameter [mm]: 35
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 41
• Spanner Size: 18
• Screw length below head [mm]: 97
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.1
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 5
• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Upper, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 82
• Overall Length [mm]: 94
• Bolt Head-/Nut Design: Male Hex
• Surface: Zink flake coated
• Strength class: 10.9
• Axle: Independent wheel suspension
• Name: Rattakalde korrektuurkruvi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ZWT-VW-034SK
• Manufacturer: NTY

• Model Year from: 2017
• Weight [kg]: 0.127
• Packaging length [cm]: 10.1
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.6
• Manufacturer: FEBEST

• Model Year from: 2017
• Weight [kg]: 0.107
• Packaging length [cm]: 9.2
• Packaging width [cm]: 3.4
• Packaging height [cm]: 3.4
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Front Axle both sides
• Quality class: PJ
• Name: Shock absorber protection kit left+right

• Model Year from: 2017
• Weight [kg]: 0.23
• Packaging length [cm]: 12.8
• Packaging width [cm]: 3.5
• Packaging height [cm]: 3.5
• Manufacturer: FEBEST
• Lisainfo: 2398-007-KIT FEBEST
• Additional information: 2398-007-KIT FEBEST

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Upper, both sides
• Thread Size: M 12
• Screw length below head [mm]: 82
• Overall Length [mm]: 94
• Strength class: 10.9
• Axle: Independent wheel suspension
• Supplementary Article/Info 2: with nut, with protect screen
• Name: Rattakalde korrektuurkruvi
• Manufacturer: MAX

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Lower, both sides
• Thread Size: M 12
• Screw length below head [mm]: 97
• Overall Length [mm]: 109
• Strength class: 10.9
• Axle: Independent wheel suspension
• Name: Rattakalde korrektuurkruvi
• Manufacturer: MAX

• Fitting Position: Front Axle
• for OE number: 1K0412303AA
• for manufacturer number: 2020212
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Front Axle both sides
• Quality class: PJ
• Name: Shock absorber protection kit left+right

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.24
• Name: Montaa§ikomplekt, roolissteem
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front Axle both sides
• Quality class: PJ
• Name: Shock absorber protection kit left+right

• Fitting Position: Rear Axle
• for OE number: 5Q0 513 425 D
• Manufacturer: MAX

Name: ZESTAW MONTA½OWY AMORTYZATORA SKODA T. SUPERB III (3V3) 1.4 TSI 15- (ODBOJEONY)

• Model Year from: 2017
• Weight [kg]: 0.141
• Packaging length [cm]: 10.7
• Packaging width [cm]: 3.4
• Packaging height [cm]: 3.4
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AD-VW-034
• Manufacturer: NTY
• Name: NTY AD-VW-034

• Fitting Position: Front Axle, Front Axle both sides
• Quality class: PJ
• Name: Shock absorber protection kit left+right

• Fitting Position: Front Axle
• Lisainfo: Top Strut Mounting
• Additional information: Top Strut Mounting

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AD-VW-033
• Manufacturer: NTY
• Name: NTY AD-VW-033

• for OE number: 5Q0511357Q
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [g]: 227
• Component Number: 2
• Name: IM 50341
• Manufacturer: ORIGINAL IMPERIUM

• Width [mm]: 127
• Thickness [mm]: 40
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Material: Plastic, Metal
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.31
• Manufacturer: FEB
• Lisainfo: 44799 FEBI
• Additional information: 44799 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• replacement in pairs recommended:
• Name: Vedruamordi tugilaager
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Required quantity: 2
• Supplementary Article/Info 2: without bearing
• Weight [kg]: 0.415
• Manufacturer: TEDGUM
• Name: TG TED22900

• Vehicle type: Kodiaq, Kodiaq Scout
• Block Separation:
• Construction Year from: 05.2017
• Fitting Position: Front Axle
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Height [mm]: 40
• Bearing Type: Ball Bearing
• Name: Laager - K„„ndmik VW P. AUDI, SKODA
• Manufacturer: MEY
• Lisainfo: 1006410020
• Additional information: 1006410020

• Suspension: for vehicles with sports suspension
• Inner Diameter 1 [mm]: 74
• Outer Diameter 1 [mm]: 127
• Fitting Position: Front Axle Right, Front Axle Left
• Name: SN M257.03
• Manufacturer: SNR

• Fitting Position: Front Axle
• Quantity per axle: 2
• Name: Laager,amorditugilaager
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Weight [kg]: 0.34
• Required quantity: 2
• Thickness [mm]: 60
• Inner Diameter [mm]: 10
• Material: Aluminium
• Mounting Type: Rubber-Metal Mount
• General Information: Shock absorber upper cover
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Quantity per packing unit: 2
• Manufacturer: KAVO PARTS

• Fitting Position: Front Axle, Front Axle both sides
• for PR number: G08
• Name: Shock absorber protection kit left+right
• Quality class: PJ

• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!BEZ O½YSKA!!!

• Fitting Position: Front Axle
• Inner Diameter [mm]: 78.5
• Outer Diameter [mm]: 127.5
• Bearing Type: Ball Bearing
• SVHC: No SVHC present!
• Manufacturer: FAG

• Material: Plastic, Metal
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 127
• Inner Diameter [mm]: 78
• Name: Laager,amorditugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 37574 01
• Manufacturer: LMI

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- BEZ O½YSKA

• Fitting Position: Front Axle
• for OE number: 1K0412303B, 1K0412303AA
• Manufacturer: KAMOKA AMORTYZATORY
• Additional information: 2019212 KAMOKA
• Lisainfo: 2019212 KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Alternative Repair Kit: 118 038
• Quantity per axle: 2
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 803 024
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles without electronic suspension control
• Material: PU (Polyurethane), Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.346
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Name: Vedruamordi tugilaager
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• General Information: Rubber and dust cover kit; rear
• Manufacturer: VIKA
• Lisainfo: 5Q0511357H/KPL VIKA
• Additional information: 5Q0511357H/KPL VIKA

• Suspension: for vehicles without electronic suspension control
• Material: PU (Polyurethane), Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.346
• Supplementary Article/Info 2: without ball bearing
• Name: SW 33 10 8747
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 14
• Supplementary Article/Info 2: without rolling bearing
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without rolling bearing
• Guarantee: 5 years guarantee
• Weight [kg]: 0.409
• Packaging length [cm]: 15.4
• Packaging width [cm]: 8.4
• Packaging height [cm]: 14.7
• Manufacturer: MONROE PODUSZKI AMORTYZATORA

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Name: Laager,amorditugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik VW P. A3/LEON/OCTAVIA/GOLF VII/SPORTSVAN 12- LE/PR

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• for OE number: 5Q0412331F
• Manufacturer: SASIC

• Model Year from: 2017
• Fitting Position: Front Axle
• Weight [kg]: 0.33
• Packaging length [cm]: 12.7
• Packaging width [cm]: 12.7
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Aluminium
• Weight [g]: 431
• Thickness [mm]: 60
• Inner Diameter [mm]: 10
• Name: IM 37975
• Manufacturer: ORIGINAL IMPERIUM

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 60
• for OE number: 5Q0513353G
• Manufacturer: SASIC

• for PR number: 1JD
• Construction Year to: 11.2017
• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LMI

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. VW T. LEON/GOLF VII/SPORTSVAN/OCTAVIA 12- LE/PR

• for PR number: 1JP
• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Left, Rear Axle Right
• for PR number: 1JP
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: SNR
• Name: SN KB954.08

• Construction Year to: 11.2017
• Fitting Position: Rear Axle
• Manufacturer: KAVO

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Quantity Unit: Set
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MEY

• Weight [kg]: 0.8
• Fitting Position: Front Axle
• Required quantity: 2
• Inner Diameter [mm]: 14
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber top rubber; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Quantity per packing unit: 2
• Guarantee: 5 years guarantee
• Weight [kg]: 0.337
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Thickness [mm]: 40
• Width [mm]: 127
• Weight [kg]: 0.31
• Bearing Type: Rolling Bearing
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Material: Plastic, Metal
• Required quantity: 2
• Fitting Position: Front Axle
• General Information: Shock absorber bearing; front
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle Left, Front Axle Right
• for PR number: G08
• Required quantity: 1
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Left, Rear Axle Right
• for PR number: 1JD, 1JA
• Required quantity: 1
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 11.2017
• Fitting Position: Rear Axle
• Name:
• Manufacturer: KYB
• Additional information: SM9925
• Lisainfo: SM9925

Technical Information: mounting (x1) / / / Fastenings : suspension mounting bolt/screw (x2), mounting washer (x4)

• for PR number: G09
• Model Year from: 2017
• Fitting Position: Front Axle
• Weight [kg]: 0.357
• Packaging length [cm]: 17.2
• Packaging width [cm]: 16.6
• Packaging height [cm]: 8.3
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Weight [kg]: 0.8
• Required quantity: 2
• Inner Diameter [mm]: 14
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Info 2: without ball bearing
• General Information: Shock absorber top rubber; front
• Manufacturer: VIKA

• Quantity: 2
• Fitting Position: Rear Axle
• Quantity Unit: Kit
• General Information: Rubber and dust cover kit; rear; 2 pcs
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Manufacturer: SKF

Name: PODUSZKA AMORT. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- Z O½YSKIEM

• Fitting Position: Front Axle Left, Front Axle Right
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: MAX

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with rolling bearing
• Quantity per axle: 2
• Replace in pairs only:
• for components see parts list:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. VW P. A3/LEON/OCTAVIA/SPORTSVAN/GOLF VII 12- !!!Z O½YSKIEM!!!

• Number of Parts [parts]: 2
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: SNR
• Name: SN KB657.27
• Additional information: KB657.27 SNR
• Lisainfo: KB657.27 SNR

• Engine Code: CZDA, CZEA
• not for PR number: 1JP
• Block Separation:
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.402
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

Suspension: for vehicles without electronic suspension control, for vehicles with standard suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles without electronic suspension control
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Height of bump stop [mm]: 127
• Manufacturer: KYB
• Name: KY 910332
• Additional information: 910332 KYB
• Lisainfo: 910332 KYB

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 14
• Supplementary Article/Supplementary Info: with integrated ball bearing
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.