• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Fabrication Number: ZTP-VW-001A
• Manufacturer: NTY

Fitting Position: Front Axle, inner, in front of axle, Left, Right, Lower

• Fitting Position: Front Axle Right, Front Axle Left, Lower
• for OE number: 1K0 407 182
• Manufacturer: GSP

• Fitting Position: Front Axle, Front
• Total Length [mm]: 54
• Outer Diameter [mm]: 48
• Inner Diameter [mm]: 12
• Manufacturer: CORTECO ZAWIESZENIE

• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• for OE number: 1K0 505 541 B
• Manufacturer: GSP

• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thickness [mm]: 45
• Material: Rubber/Metal
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38, 24
• Mounting Type: Rubber-Metal Mount
• Fabrication Number: ZTT-VW-006A
• Manufacturer: NTY

Fitting Position: Rear Axle, Upper, inner, Rear Axle Left, Rear Axle Right

• Fitting Position: Lower, Front, Front Axle Left, Front Axle Right
• Thickness [mm]: 54
• Outer Diameter 1 [mm]: 28
• Outer Diameter 2 [mm]: 40
• Inner Diameter 1 [mm]: 12
• Manufacturer: BGA

• Engine Code: DFYA
• for PR number: 0N4
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• for OE number: 1K0 505 323N, 5Q0 505 323D
• Outer Diameter [mm]: 38
• Inner Diameter [mm]: 14
• Width [mm]: 26
• Quantity per axle: 2
• Manufacturer: TOPRAN

Fitting Position: Rear Axle Left, Rear Axle Right, Upper, Rear, outer General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, inner, in front of axle, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 53
• Manufacturer: DELPHI
• Name: DE TD521W

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Height [mm]: 54
• Name: ALT 81191AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• for OE number: 5Q0407182A
• Manufacturer: SASIC
• Additional information: 9001759
• Lisainfo: 9001759

• Fitting Position: Rear Axle, outer, Lower
• Axle: Multi-link Axle
• alternative OE number: AT WHEEL CARRIER
• for PR number: 0N4
• Inner Diameter 1 [mm]: 49
• Outer Diameter 1 [mm]: 12
• Thickness 1 [mm]: 38
• Name: DE TD1058W
• Manufacturer: DELPHI

• Fitting Position: Rear Axle, Lower, outer
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 50
• Name: ALT 94739AL
• Manufacturer: ALTE AUTOMOTIVE

• Engine Code: DFYA
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.183
• Observe service information:
• Manufacturer: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 5Q0407182
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Name: DA DSS1079
• Manufacturer: DAYCO

• Axle: Multi-link Axle
• for PR number: 0N4
• Height 1 [mm]: 50
• Height 2 [mm]: 28
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Manufacturer: KAVO

Fitting Position: Rear Axle, outer, Steering Knuckle, wheel suspension, Lower

• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear
• General Information: bonded rubber bush
• Manufacturer: BORSEHUNG

• Engine Code: DFYA
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.18
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, both sides
• Control/Trailing Arm Type: for trailing arm
• Quantity per axle: 2
• Article number of recommended accessories: 38906 01, 43359 01, 44089 01
• Observe service information:
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Engine Code: DFYA
• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 38.3, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, outer, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.125
• Manufacturer: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: DFYA
• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, inner, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.071
• Manufacturer: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 01/20
• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• for OE number: 5Q0407183K
• Manufacturer: SASIC

• Fitting Position: Rear Axle, Upper, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 45
• Name: ALT 88666AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, in front of axle, Lower
• Axle: Multi-link Axle
• for PR number: 0N4
• Height 1 [mm]: 63.8
• Height 2 [mm]: 44.5
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 60.3
• Manufacturer: KAVO

• Fitting Position: Lower
• General Information: bonded rubber bush
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Height [mm]: 64
• Name: ALT 91581AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front
• General Information: wishbone arm; front
• Manufacturer: VIKA

• Fitting Position: Rear Axle, Upper, both sides, outer
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Article number of recommended accessories: 38910 01
• Observe service information:
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right, Front Axle Left, Lower
• for OE number: 5Q0 407 183 G
• Manufacturer: GSP ZAWIESZENIE

• Weight [kg]: 0.074
• Fitting Position: Rear Axle both sides, Upper, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 38.1
• Length [mm]: 45
• Manufacturer: RTS

• Weight [kg]: 0.13
• Fitting Position: Rear Axle both sides, Upper, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Length [mm]: 45
• Manufacturer: RTS

• Fitting Position: Rear Axle, Upper, both sides, inner
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Article number of recommended accessories: 38910 01
• Observe service information:
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear
• General Information: bonded rubber bush
• Manufacturer: BORSEHUNG

• Engine Code: DFYA
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.26
• Supplementary Article/Info 2: with fastening material
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer: LEMFÖRDER

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Front, outer SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, inner, Front, Lower
• Height 1 [mm]: 54
• Height 2 [mm]: 33
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Manufacturer: KAVO

• Fitting Position: Front Axle, Rear
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 13.2
• Outer Diameter [mm]: 65.3
• Width 1 [mm]: 28
• Width 2 [mm]: 50
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Upper, Rear Axle Left, Rear Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 24, 38
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)"

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEYLE

• Fitting Position: Rear Axle both sides, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 37.4
• Inner Diameter [mm]: 12.1
• Length [mm]: 49.8
• Weight [kg]: 0.132
• Manufacturer: RTS

• Weight [kg]: 0.18
• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Diameter 1 [mm]: 12.1
• Diameter 2 [mm]: 60.3
• Length [mm]: 63.8
• Manufacturer: RTS

• Weight [kg]: 0.342
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• Height [mm]: 50
• Name: ALT 88894AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle
• General Information: bonded rubber bush
• Manufacturer: BORSEHUNG

• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 64.8
• Length [mm]: 50
• paired article number: 271402
• Weight [kg]: 0.34
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Right, Front Axle Left, Lower

• Weight [kg]: 0.26
• Fitting Position: Front Axle both sides, Lower, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 64.7
• Length [mm]: 50
• Manufacturer: RTS

• Engine Code: DFYA
• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65, 30
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.302
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, in front of axle, Lower
• Axle: Multi-link Axle
• for PR number: 0N4
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 60
• Thickness 1 [mm]: 64
• Inner Diameter 2 [mm]: 12
• Outer Diameter 2 [mm]: 60
• Thickness 2 [mm]: 45
• Name: DE TD1785W
• Manufacturer: DELPHI

• Fitting Position: Front Axle, inner, behind the axle, Lower
• Inner Diameter 1 [mm]: 13
• Outer Diameter 1 [mm]: 65
• Thickness 1 [mm]: 28
• Inner Diameter 2 [mm]: 13
• Outer Diameter 2 [mm]: 65
• Thickness 2 [mm]: 50
• Name: DE TD1784W
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left, Front Axle Right, Rear
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, both sides, Rear
• Weight [kg]: 0.36
• Required quantity: 2
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 14.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5
• Manufacturer: MONROE

• Weight [kg]: 0.408
• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 72
• Length [mm]: 94.2
• Manufacturer: RTS