• Filter type: Spin-on Filter
• Height [mm]: 75
• Outer Diameter [mm]: 76
• Inner Diameter 1 [mm]: 63
• Inner Diameter 2 [mm]: 72
• Supplementary Article/Info 2: with one anti-return valve
• Manufacturer: JP GROUP
• Lisainfo: Oil Filter
• Additional information: Oil Filter

• Filter type: Spin-on Filter
• Height [mm]: 79
• Outer Diameter [mm]: 76
• Inner Diameter 1 [mm]: 62
• Inner Diameter 2 [mm]: 71
• Supplementary Article/Info 2: with one anti-return valve
• Manufacturer: JP GROUP
• Lisainfo: Oil filter
• Additional information: Oil filter

• Filter type: Spin-on Filter
• Height [mm]: 85
• Thread Size: 3/4-16 UNF
• Outer Diameter [mm]: 76.5
• Inner Diameter 1 [mm]: 71
• Inner Diameter 2 [mm]: 62
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: Spin-on Filter
• Length [mm]: 87.2
• Outer Diameter [mm]: 76.5
• Fitted Diameter [mm]: 71.4
• Internal Thread [mm]: 3/4 x 16
• Manufacturer: ASHIKA

• Filtritüüp: Keeratav filter
• Pikkus (mm): 87,2
• Välisläbimõõt [mm]: 76,5
• Installatsiooniläbimõõt (mm): 71,4
• Sisekeere (mm): 3/4 x 16
• Manufacturer: JAPKO
• Lisainfo: 10279 JAPKO

• Filter type: Spin-on Filter
• Supplementary Article/Info 2: with one anti-return valve
• Height [mm]: 81
• Outer Diameter [mm]: 75
• for OE number: 1026285
• Manufacturer: KAMOKA FILTRY

• Filter type: Spin-on Filter
• Length [mm]: 87.2
• Outer Diameter [mm]: 76.5
• Fitted Diameter [mm]: 71.4
• Internal Thread [mm]: 3/4 x 16
• Name: OLIFILTER
• Manufacturer: JPA
• Additional information: FO-279S JP
• Lisainfo: FO-279S JP

• Kõrgus (mm): 87
• Keermemõõt: 3/4"-16 UNF
• Välisläbimõõt [mm]: 77
• Konteineri tüüp: Sahtel
• Filtritüüp: Keeratav filter
• Versioon: w/ Anti-Drain valve, with By-Pass valve
• Avamisrõhk klapp (bar): 1
• pakendi pikkus [cm]: 7,8
• pakendi laius [cm]: 7,8
• pakendi kõrgus [cm]: 9
• Rõngastihendi läbimõõt alates (mm): 62
• Rõngastihendi läbimõõt kuni (mm): 71,5
• Name: CH COF100165S
• Manufacturer: CHAMPION

• Välisläbimõõt 1 [mm]: 78
• Siseläbimõõt 1 [mm]: 72
• Siseläbimõõt 2 (mm): 63
• Keermemõõt: 3/4"-16 UNF
• Kõrgus (mm): 80
• Filtritüüp: Keeratav filter
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Spin-on Filter
• Height [mm]: 86
• Outer Diameter [mm]: 76
• Inner Diameter 1 [mm]: 61
• Inner Diameter 2 [mm]: 70
• Manufacturer: JP GROUP
• Lisainfo: Oil Filter
• Additional information: Oil Filter

• Filter type: Spin-on Filter
• Height [mm]: 76
• Outer Diameter [mm]: 78
• Internal Thread Size: 3/4" - 16 UNF
• Weight [kg]: 0.29
• Name: OLIFILTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 92
• Thread Size: 3/4-16 UNF
• Outer Diameter [mm]: 76
• Outer Diameter 1 [mm]: 78
• Outer Diameter 2 [mm]: 71
• Inner Diameter 1 [mm]: 61
• Bypass Valve Opening Pressure [bar]: 1.2
• Supplementary Article/Info 2: with one anti-return valve
• Filter type: Spin-on Filter
• Manufacturer: SOFIMA

• Parameter: DP1110.11.0038
• Height [mm]: 79
• Thread Size: "3/4""-16"
• Diameter 3 [mm]: 62
• Diameter 4 [mm]: 72
• Outer Diameter [mm]: 79
• Filter type: Spin-on Filter
• Manufacturer: DRIVE

• Filter type: Spin-on Filter
• Height [mm]: 87
• Outer Diameter [mm]: 77
• Name: OLIFILTER
• Manufacturer: MAX

• Filter type: Spin-on Filter
• Diameter [mm]: 78
• Thread Size: 3/4"-16 UNF
• Height [mm]: 92
• Name: Olifilter
• Manufacturer: MAX

• Filtritüüp: Keeratav filter
• Kõrgus (mm): 74
• Keermemõõt: 3/4"-16
• Välisläbimõõt [mm]: 76
• Name: Oil filter
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Filter type: Spin-on Filter
• Height [mm]: 75
• Outer Diameter [mm]: 78.5
• Thread Size: 3/4 - 16UNF
• Name: OLIFILTER
• Manufacturer: ALC

• Engine Code: 136X,136IG
• Alternatively:
• Filter type: Spin-on Filter
• Height [mm]: 85
• Thread Size: UNF 3/4" -16
• Outer Diameter [mm]: 77
• Inner Diameter 1 [mm]: 71
• Inner Diameter 2 [mm]: 62
• Bypass Valve Opening Pressure [bar]: 1
• Weight [kg]: 0.282
• Manufacturer: VALEO
• Name: VA 586039

• Filter type: Spin-on Filter
• Height [mm]: 76
• Outer Diameter [mm]: 78
• Internal Thread Size: 3/4" - 16 UNF
• Weight [kg]: 0.29
• Name: OLIFILTER
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 136X,136IG
• Filter type: Spin-on Filter
• Height [mm]: 85
• Thread Size: UNF 3/4" -16
• Outer Diameter [mm]: 77
• Inner Diameter 1 [mm]: 71
• Inner Diameter 2 [mm]: 62
• Bypass Valve Opening Pressure [bar]: 1
• Weight [kg]: 0.282
• Manufacturer: VALEO
• Name: VA 586023

• Engine Code: 136B
• Filtritüüp: Keeratav filter
• Kaal (g): 246
• Siseläbimõõt 2 (mm): 71
• Siseläbimõõt 1 [mm]: 62
• Avamisrõhk klapp (bar): 1
• Keermemõõt: 3/4-16 UNF
• Välisläbimõõt [mm]: 76
• Piirangutega toode/piirangu info 2: koos ühe tagasijooksu sulgurklapiga
• Kõrgus (mm): 74
• Kaal (kg): 0,286
• Manufacturer: ACKOJA

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Diameter [mm]: 78
• Filter type: Spin-on Filter
• Thread Size: 3/4"-16 UNF
• Height [mm]: 92
• Name: OLIFILTER
• Manufacturer: MEY

• Engine Code: 136B
• Filter type: Spin-on Filter
• Height [mm]: 86.5
• Thread Size: 3/4" 16 UNF
• Outer Diameter [mm]: 76.7
• Inner Diameter 1 [mm]: 62.4
• Gasket inner diameter: 71
• Quantity: 1
• Name: OLIFILTER
• Manufacturer: BOS

• Engine Code: 136B
• Weight [g]: 246
• Inner Diameter 2 [mm]: 71
• Filter type: Spin-on Filter
• Inner Diameter 1 [mm]: 62
• Bypass Valve Opening Pressure [bar]: 1
• Thread Size: 3/4-16 UNF
• Outer Diameter [mm]: 76
• Supplementary Article/Info 2: with one anti-return valve
• Height [mm]: 74
• Weight [kg]: 0.286
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Spin-on Filter
• Diameter [mm]: 75
• Height [mm]: 94
• Thread Size: 3/4"-16UNF-2B
• Diameter 2 [mm]: 71
• Seal Diameter [mm]: 61.7
• Tightening Torque [Nm]: 20
• Article number of the recommended special tool: OCS 1
• Supplementary Article/Info 2: with one anti-return valve
• Valve type: Overflow Valve
• Net Weight [g]: 287
• Packaging width [cm]: 7.85
• Packaging length [cm]: 7.9
• Packaging height [cm]: 9.35
• Manufacturer: KNECHT
• Name: KN OC981

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 75
• Seal Diameter [mm]: 72
• Thread Size: 3/4-16 UNF
• Height [mm]: 87
• Manufacturer: HENGST FILTER

• Filter type: Spin-on Filter
• Article number of the recommended special tool: LS 7
• Gasket inner diameter: 62
• Seal Ring Outer Diameter: 71
• Height [mm]: 79
• Thread Size: 3/4-16 UNF
• Outer Diameter [mm]: 76
• Supplementary Article/Info 2: with one anti-return valve
• Bypass Valve Opening Pressure [bar]: 1
• SVHC: No SVHC present!
• Name: OLIFILTER
• Manufacturer: MAN

• Filter type: Spin-on Filter
• Inner Diameter 1 [mm]: 62
• Height [mm]: 79
• Supplementary Article/Info 2: with one anti-return valve
• Thread Size: 3/4-16 UNF
• Outer Diameter [mm]: 76
• Inner Diameter 2 [mm]: 71
• Bypass Valve Opening Pressure [bar]: 1
• Weight [kg]: 0.273
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.