• Vehicle Identification Number (VIN) from: 9N-2-100001
• Number of Teeth: 19
• Lisainfo: Water Pump
• Additional information: Water Pump

• Vehicle Identification Number (VIN) to: 6Y-13207 095, 6Y-1X013 283
• Block Separation:
• Number of Teeth: 19
• Water Pump Type: for timing belt drive
• for OE number: 045 121 011 B
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) from: 6Y-13207 096, 6Y-1X013 284
• Block Separation:
• Number of Teeth: 19
• Water Pump Type: for timing belt drive
• for OE number: 045 121 011 F
• Manufacturer: KAMOKA

• Transmission Type: 5-Speed Manual Transmission
• Fabrication Number: CPW-AU-035
• Manufacturer: NTY

• Number of Teeth: 19
• Pulleys: with belt pulley
• Manufacturer: DENCKERMANN FILTRY

• Number of Teeth: 19
• Fabrication Number: CPW-AU-029
• Manufacturer: NTY

• Engine Code: ATD
• Vehicle Identification Number (VIN) to: 6Y-1X013283, 6Y-13207095
• Block Separation:
• Number of Teeth: 19
• Name: VEEPUMP
• Manufacturer: MAX

• Vehicle Identification Number (VIN) to: 9N2100000
• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 7
• Water Pump Pulley Ø [mm]: 56.23
• Impeller Diameter [mm]: 60
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Manufacturer: METELLI

• Construction Year from: 04.2002
• Vehicle Identification Number (VIN) to: 6Y-2-510001
• Number of Teeth: 19
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: BGA

• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• Name: VEEPUMP
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: with seal
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) to: 9N2100000
• Number of Teeth: 19
• Overall Height [mm]: 101
• Manufacturer: ASHIKA

• Vehicle Identification Number (VIN) to: 9N2100000
• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 7
• Water Pump Pulley Ø [mm]: 56.23
• Impeller Diameter [mm]: 60
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Name: VEEPUMP
• Manufacturer: GRA

• Vehicle Identification Number (VIN) from: 9N2100001
• Overall Height [mm]: 100
• Number of Teeth: 19
• Manufacturer: ASHIKA

• Vehicle Identification Number (VIN) to: 9N2100000
• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: with seal ring
• Name: Water pump
• Quality class: PJ

Lisainfo: "Tootja: SRL
LUPO
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
LUPO
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) from: 6Y_1X013284
• Trim Level: 0201> , ATD ,
• for OE number: 045121011HX
• Weight [kg]: 0.8
• Name: VEEPUMP
• Manufacturer: DAY
• Additional information: DP163
• Lisainfo: DP163

• Vehicle Identification Number (VIN) from: 9N2100001
• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: with seal ring
• Name: Water pump
• Quality class: PJ

Lisainfo: "Tootja: SRL
A2 (8Z)
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A2 (8Z)
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) from: 9N2100001
• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 7
• Water Pump Pulley Ø [mm]: 56.23
• Impeller Diameter [mm]: 60
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Manufacturer: METELLI
• Lisainfo: 24-0879 MET
• Additional information: 24-0879 MET

• General Information: water pump
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 9N2100001
• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 7
• Water Pump Pulley Ø [mm]: 56.23
• Impeller Diameter [mm]: 60
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Name: VEEPUMP
• Manufacturer: GRA

• Vehicle Identification Number (VIN) to: 6Y_1X013283
• Trim Level: >0101 , ATD ,
• for OE number: 045121011BX
• Weight [kg]: 0.9
• Name: VEEPUMP
• Manufacturer: DAY

• Pulleys: with belt pulley
• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.74

• New Part:
• Construction Year to: 01.2001
• Vehicle Identification Number (VIN) to: 6Y1X013283
• Pulleys: with belt pulley
• Number of Teeth: 19
• Manufacturer: DOLZ
• Name: DO A196

• New Part:
• Vehicle Identification Number (VIN) from: 6Y1X013284
• Pulleys: with belt pulley
• Manufacturer: DOLZ
• Name: DO A249

• Engine Code: ATD, AXR
• Vehicle Identification Number (VIN) from: 6Y-1X013 284, 6Y-13207 096
• Block Separation:
• Width [mm]: 102.8
• Water pump impeller material: Metal
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 7
• Weight [kg]: 0.737
• Supplementary Article/Info 2: with seal ring
• for OE number: 045 121 011 H
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 9N-2-100001
• Weight [kg]: 0.78
• Number of Teeth: 19
• Name: AI 1670
• Manufacturer: AIRTEX

• Engine Code: ATD, AXR
• Manufacturer: MAGNETI MARELLI
• Name: MM WPQ1195

• Engine Code: AXR, ATD
• Block Separation:
• Vehicle Identification Number (VIN) from: 6Y-1X013 284, 6Y-13207 096
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA

• Vehicle Identification Number (VIN) to: 9N-2-100000
• Weight [kg]: 0.82
• Number of Teeth: 19
• Name: AI 1776
• Manufacturer: AIRTEX

• Engine Code: ATD
• Vehicle Identification Number (VIN) to: 6Y-1X013 283, 6Y-13207 095
• Supplementary Article/Supplementary Info: with seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• Quality: Sealed with SiC/SiC
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Construction Year from: 03.2002
• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Weight [kg]: 0.81
• Name: VEEPUMP
• Manufacturer: VAL

• Engine Code: ATD, AXR
• Vehicle Identification Number (VIN) to: 6Y-1X013 283, 6Y-13207 095
• Block Separation:
• Water pump impeller material: Metal
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 7
• Weight [kg]: 0.771
• Supplementary Article/Info 2: with seal ring
• for OE number: 045 121 011 BX
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ATD, AXR
• Vehicle Identification Number (VIN) from: 6Y-1X013 284, 6Y-13207 096
• Block Separation:
• Water pump impeller material: Metal
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 7
• Weight [kg]: 0.737
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pulleys: with belt pulley
• Number of Teeth: 19
• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.74

• Vehicle Identification Number (VIN) from: 9N-2-100 001
• Weight [kg]: 0.795
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: CONTITECH

• Vehicle Identification Number (VIN) from: 6Y-13207 096, 6Y-1X013 284
• Engine Code: ATD, AXR
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Technical Information: SKF Aquamax
• Name: VEEPUMP
• Manufacturer: SKF

• Engine Code: ATD
• Vehicle Identification Number (VIN) to: 6Y-1X013 283, 6Y-13207 095
• Block Separation:
• Number of Teeth: 19
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA

• Engine Code: ATD, AXR
• Vehicle Identification Number (VIN) from: 6Y-1X013 284, 6Y-13207 096
• Block Separation:
• Supplementary Article/Supplementary Info: with seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• Quality: Sealed with SiC/SiC
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Engine Code: ATD, AXR
• Vehicle Identification Number (VIN) to: 6Y-1X013 283, 6Y-13207 095
• Block Separation:
• Water pump impeller material: Metal
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 7
• Weight [kg]: 0.771
• for OE number: 045 121 011 BX
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: SW 30 92 1186
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ATD, AXR
• Vehicle Identification Number (VIN) from: 6Y-1X013 284, 6Y-13207 096
• Block Separation:
• Width [mm]: 102.8
• Water pump impeller material: Metal
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 7
• Weight [kg]: 0.737
• Supplementary Article/Info 2: with seal ring
• for OE number: 045 121 011 H
• Observe service information:
• Name: SW 30 93 8512
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ATD, AXR
• Vehicle Identification Number (VIN) from: 6Y-1X013 284, 6Y-13207 096
• Block Separation:
• Supplementary Article/Supplementary Info: with seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• reinforced version:
• Quality: Sealed with SiC/SiC
• Water pump impeller material: Metal
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Housing material: Stainless Steel
• Chemical Properties: Heat-resistant
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Vehicle Identification Number (VIN) to: 6Y-13207 095, 6Y-1X013 283
• Engine Code: ATD
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Manufacturer: SKF
• Name: SK VKPC81417

• Number of Teeth: 120
• Width [mm]: 30
• Number of belts: 1
• for article number: A249
• Manufacturer: DOLZ
• Name: DO KD033

• Driven Units: Camshaft
• Trim Level: HT -KTBWP
• Number of Teeth: 120
• Width [mm]: 30
• Length [mm]: 1,143
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 2
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY

• Number of belts: 1
• Weight [kg]: 2.1
• Name: AI WPK-177603
• Manufacturer: AIRTEX

• Vehicle Identification Number (VIN) from: 6Y23306085
• Engine Code: AXR
• Construction Year from: 02.2001
• Number of Teeth 1: 120
• Width 1 [mm]: 30
• Water Pump Type: for timing belt drive
• Manufacturer: BUGATTI

• Construction Year from: 02.2001
• Construction Year to: 08.2003
• Driven Units: Camshaft
• Engine Code: ATD
• Vehicle Identification Number (VIN) from: 6Y-1X013284/13207096
• Supplementary Article/Info 2: without tensioner pulley damper
• Article number of the recommended special tool: GAT4840A, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Vehicle Identification Number (VIN) from: 6Y-23306085, 6Y-2X022028
• for components see parts list:
• Pulleys contained: 2
• Number of belts: 1
• Supplementary Article/Supplementary Info: with water pump
• Observe system fill quantity:
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AXR
• Article number of the recommended special tool: VKN 1000
• Water pump impeller material: Plastic
• Belt Width [mm]: 30
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 120
• Belts: with rounded tooth profile
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: SKF
• Lisainfo: VKMC 01250-2 SKF
• Additional information: VKMC 01250-2 SKF

• Construction Year from: 08.2003
• Number of Teeth 1: 120
• Width 1 [mm]: 30
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA

• Number of belts: 1
• Number of track rollers: 2
• Width 1 [mm]: 30
• Number of Teeth 1: 120
• Manufacturer: SNR
• Name: SN KDP457.491

• Construction Year to: 06.2003
• Number of Teeth 1: 120
• Width 1 [mm]: 30
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA

• Construction Year from: 08.2003
• Driven Units: Camshaft
• Engine Code: ATD, AXR
• Article number of the recommended special tool: GAT4840A, GAT4844
• Block Separation:
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Number of Teeth: 120
• Width [mm]: 30
• Number of belts: 1
• for article number: 570057N
• Packaging length [cm]: 28
• Packaging width [cm]: 17.5
• Packaging height [cm]: 17.5
• Weight [kg]: 1.762

• Engine Code: ATD, AXR
• Construction Year from: 10.2001, 10.2005
• Construction Year to: 10.2005
• Vehicle Identification Number (VIN) from: 6Y..2..407 001, 6Y..2X032 051
• Block Separation:
• Length [mm]: 1,143
• Number of Teeth: 120
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Name: Veepump hammasrihmakomplekt
• Manufacturer: BOS

• Number of belts: 1
• Number of track rollers: 2
• Width 1 [mm]: 30
• Number of Teeth 1: 120
• Manufacturer: SNR
• Name: SN KDP457.271

• Engine Code: ATD, AXR
• Vehicle Identification Number (VIN) from: 6Y-43893 312
• Block Separation:
• Width [mm]: 30
• Number of Teeth: 120
• Surface: Coated
• Belts: with rounded tooth profile
• Weight [kg]: 1.8
• for OE number: 038 198 119 A S1
• Supplementary Article/Supplementary Info: with water pump
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 08.2003
• Engine Code: ATD, AXR
• Number of ribs: 120
• Length [mm]: 1,143
• Width [mm]: 30
• Number of Teeth: 120
• Manufacturer: MAGNETI MARELLI

• Number of belts: 1
• Number of track rollers: 3
• Number of Teeth 1: 120
• Manufacturer: SNR
• Name: SN KDP457.541

• Number of belts: 1
• Number of track rollers: 2
• Width 1 [mm]: 30
• Number of Teeth 1: 120
• Manufacturer: SNR /NTN-SNR/
• Name: SN KDP457.492

• Construction Year to: 01.2001
• Driven Units: Camshaft
• Engine Code: ATD
• Vehicle Identification Number (VIN) to: 6Y-1X013283/13207095
• Supplementary Article/Info 2: without tensioner pulley damper
• Article number of the recommended special tool: GAT4840A, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Construction Year from: 08.2003
• Driven Units: Camshaft
• Engine Code: ATD, AXR
• Block Separation:
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 120
• Weight [kg]: 2.079
• Width [mm]: 30
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Construction Year to: 07.2003
• Driven Units: Camshaft
• Engine Code: ATD
• Vehicle Identification Number (VIN) to: 9N-2-100 000
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 120
• Weight [kg]: 1.979
• Width [mm]: 30
• Name: Veepump hammasrihmakomplekt
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Driven Units: Camshaft
• Trim Level: HT ->11/02
• Number of Teeth: 120
• Width [mm]: 30
• Length [mm]: 1,143
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 2
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY

• Construction Year to: 08.2003
• Engine Code: ATD
• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 1
• Water pump impeller material: Plastic
• Belt Width [mm]: 30
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with tensioner pulley damper, with studs
• Number of Teeth: 120
• Belts: with rounded tooth profile
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: SKF

• Construction Year from: 02.2001
• Construction Year to: 08.2003
• Driven Units: Camshaft
• Engine Code: ATD
• Vehicle Identification Number (VIN) from: 6Y-1X013284/13207096
• Supplementary Article/Info 2: with tensioner pulley damper
• Article number of the recommended special tool: GAT4840A
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Construction Year to: 01.2001
• Driven Units: Camshaft
• Engine Code: ATD
• Vehicle Identification Number (VIN) to: 6Y-1X013283/13207095
• Supplementary Article/Info 2: with tensioner pulley damper
• Article number of the recommended special tool: GAT4840A, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Construction Year to: 07.2003
• Driven Units: Camshaft
• Engine Code: ATD
• Vehicle Identification Number (VIN) to: 9N-2-100 000
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 120
• Weight [kg]: 2.309
• Width [mm]: 30
• Supplementary Article/Info 2: with tensioner pulley damper
• Name: Veepump hammasrihmakomplekt
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Engine Code: ATD, AXR
• Block Separation:
• Pulleys contained: 2
• Supplementary Article/Info 2: with fastening material
• Number of belts: 1
• Number of Teeth: 120
• Width [mm]: 30
• Supplementary Article/Supplementary Info: with coolant, with water pump
• Operating Mode: Mechanical
• Weight [kg]: 6.349
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.