• Engine Code: AZF
• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Overall Length [mm]: 750
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Engine Code: AZF
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Length [mm]: 780
• Number of pins: 5
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

Manufacturer: MAGNETI MARELLI

• Engine Code: AZE
• Colour: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Surve alates [kPA]: 20
• Surve kuni [kPA]: 11
• Pistikkontaktide arv: 4
• Komponendinumber: 120-08-020
• Manufacturer: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Üldine informatsioon: temperature sensor
• Manufacturer: VIKA

• Number of pins: 4
• Housing Colour: green
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Engine Code: AZE, AZF
• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 4
• Kaal (kg): 0,04
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 17SKV104

• Üldine informatsioon: pressure sensor
• Manufacturer: VIKA

• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 4
• Kaal (kg): 0,04
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 17SKV117

• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 4
• Kaal (kg): 0,03
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 17SKV134

• Üldine informatsioon: hall sender camshaft
• Manufacturer: VIKA

• Measuring Range from [kPa]: 20
• Measuring Range to [kPa]: 115
• Measuring Range from [V]: 0.55
• Measuring Range to [V]: 4.55
• Number of connectors: 4
• Manufacturer: VERNET

Manufacturer: MAGNETI MARELLI

• Vehicle Identification Number (VIN) from: 6Y13174001, 6Y1X011001
• Vehicle Identification Number (VIN) to: 6Y13174000, 6Y1X011000
• Required quantity: 1
• Manufacturer: BREMI

• Vehicle Identification Number (VIN) to: 6Y-1-286342
• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: BMW, Volvo, VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul

• Engine Code: AZE
• Construction Year to: 12.2000
• Vehicle Identification Number (VIN) to: 6Y_13174000, 6Y_1X011000
• Pressure from [kPA]: 15
• Pressure to [kPA]: 120
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Kaablipikkus (mm): 200
• Pistikkontaktide arv: 3
• Manufacturer: ERA

• Värv: must
• Materjal: Plastik
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Installatsiooni pool: pärast katalüsaatorit
• Seerianumber: ESL-AU-007
• Manufacturer: NTY

• Measuring Range from [kPa]: 20
• Measuring Range to [kPa]: 115
• Measuring Range from [V]: 0.45
• Measuring Range to [V]: 4.55
• Number of connectors: 4
• Manufacturer: VERNET

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: Gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) to: 6Y-1X011 000
• Engine Code: AZE, AZF
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 15
• Pressure to [kPA]: 120
• for OE number: 036 906 051
• Manufacturer: MEAT&DORIA

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Vehicle Identification Number (VIN) to: 6Y-13174000, 6Y-1X011000
• Connector Shape: D Shape
• Number of pins: 4
• Sensor Type: NTC Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Info 2: with seal ring
• for OE number: 036 906 051
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 12.2000
• Vehicle Identification Number (VIN) from: 6Y-13174 001, 6Y-1X011 001
• Number of pins: 4
• Pressure from [kPA]: 21
• Manufacturer: DELPHI
• Name: DE PS10177

• Construction Year to: 12.2000
• Vehicle Identification Number (VIN) to: 6Y-13174 000, 6Y-1X011 000
• Number of pins: 4
• Pressure from [kPA]: 21
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Vehicle Identification Number (VIN) to: 6Y-1-286 342
• Length [mm]: 260
• Number of connectors: 3
• Colour: brown
• Weight [kg]: 0.06
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 08.2000, 12.2001
• Vehicle Identification Number (VIN) to: 6Y1286342, 6Y-1-286 342
• Block Separation:
• Colour: brown
• Cable Length [mm]: 155
• Number of pins: 3
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Fitting Position: before catalytic converter
• Observe technical data:
• Manufacturer Restriction: VAG
• Number of pins: 6
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Socket Width [mm]: 2.8
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Lambda Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Lambda Sensor: Heated
• Voltage [V]: 12
• Number of circuits: 4
• Cable Length [mm]: 500
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Construction Year to: 12.2000
• Vehicle Identification Number (VIN) to: 6Y_13174000, 6Y_1X011000
• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP358152161

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 4
• Weight [kg]: 0.02
• for OE number: 036 906 051
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AZE
• Construction Year to: 08.2000
• Vehicle Identification Number (VIN) to: 6Y_1_286342
• Housing Colour: brown
• Length [mm]: 250
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Engine Code: AZE, AZF
• Vehicle Identification Number (VIN) to: 6Y-1-286342
• Cable Length [mm]: 250
• Number of pins: 3
• Housing Colour: brown
• Manufacturer: FAE

• Vehicle Identification Number (VIN) from: 6Y-1-286 343
• Number of connectors: 3
• Weight [kg]: 0.62
• for OE number: 06A 905 377 C
• Name: Detonatsiooniandur
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 6Y-1-286 343
• Number of connectors: 3
• Weight [kg]: 0.057
• for OE number: 06A 905 377 C
• Name: SW 30 10 6281
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• OE-numbri jaoks: 6Q1 721 503 C
• vasak/paremroolimine: vasakpoolse roolimise jaoks
• Pistikkontaktide arv: 6
• Pistikukatte kuju: ristkülik
• Seerianumber: EAP-AU-000
• Manufacturer: NTY
• Name: NTY EAP-AU-000

• Engine Code: AZE, AZF
• Construction Year from: 01.2001
• Vehicle Identification Number (VIN) from: 6Y13174001, 6Y1X011001
• Block Separation:
• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Engine Code: AZF
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: AZE, AZF
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: AZE
• Construction Year to: 12.2000
• Vehicle Identification Number (VIN) to: 6Y_13174000, 6Y_1X011000
• Surve alates [kPA]: 15
• Surve kuni [kPA]: 120
• Väljundpinge alates [V]: 0,25
• Väljundpinge kuni [V]: 4,75
• Name: EP 1.993.084
• Manufacturer: EPS

• Fitting Position: Front
• Exhaust System: after catalytic converter
• Engine Code: AZF
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 940
• Number of connectors: 4
• Manufacturer: VERNET

• Vehicle Identification Number (VIN) to: 6Y-13174000, 1X 000
• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Engine Code: AZE
• Construction Year from: 09.2000
• Vehicle Identification Number (VIN) from: 6Y_1_286343
• Housing Colour: brown
• Length [mm]: 225
• Name: EP 1.957.036
• Manufacturer: EPS

• Fitting Position: Front, after catalytic converter
• Engine Code: AZF
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.156
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AZE
• Lambda Sensor: Regulating Probe, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 630
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: AZF
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Socket colour: brown
• for OE number: 036 906 265 H
• Length [mm]: 625
• Weight [kg]: 0.171
• Thread Size: M18 x 1,5
• Connector Shape: D Shape
• Cable Length [mm]: 620
• Number of pins: 4
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Engine Code: AZF
• Cable Length [mm]: 700
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"

• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 650
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Takistus [oom]: 6
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 09SKV706

• Resistor [Ohm]: 9
• Conductor Number: 4
• Length [mm]: 721
• Number of circuits: 4
• Cable Length [mm]: 721
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 760
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Name: CE 09SKV694
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Engine Code: AZF
• Cable Length [mm]: 740
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Engine Code: AZF
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 550
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Seerianumber: EAP-AU-001
• Manufacturer: NTY
• Name: NTY EAP-AU-001

• Rakendustüüp: manuaalne
• Üldine informatsioon: accelerator pedal with electronic module; MT
• Manufacturer: VIKA

• Engine Code: AZF
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

• Engine Code: AZE, AZF
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: AZE
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: AZE
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 1,800
• Number of pins: 4
• Recommended change interval [km]: 160,000
• Weight [kg]: 0.166
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 1
• Lambda andur: soojendatud
• pikkus üle kõige (mm): 330
• Pistikkontaktide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Üldine informatsioon: lambda probe; 4 wire
• Manufacturer: VIKA

• Engine Code: AZF
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.122
• Socket colour: brown
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Length [mm]: 570
• for OE number: 06A 906 262 F
• Cable Length [mm]: 570
• Number of pins: 4
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AZE
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 760
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: AZE
• for OE number: 047906265B, 022906262F
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 500
• Number of pins: 4
• Weight [g]: 125
• Gross Weight [g]: 158
• Manufacturer: DENSO
• Name: DN DOX-2015

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
POLO CLASSIC (6KV2),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
POLO CLASSIC (6KV2),
(kvaliteediklass: Q)"

• Transmission Type: 5-Speed Manual Transmission, Manual Transmission
• Number of mounting bores: 3
• Number of pins: 6
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: AZF
• for OE number: 06A906262AJ, 022906262BG
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 650
• Number of pins: 4
• Weight [g]: 189
• Gross Weight [g]: 222
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)"

• Engine Code: AZF
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 8
• Overall Length [mm]: 560
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: AZF
• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 720
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.17
• Manufacturer: VALEO
• Name: VA 368041

• Lambda andur: soojendatud
• Üldine informatsioon: lambda probe; 5 wire
• Manufacturer: VIKA

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 520
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY

• Engine Code: AZF
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 630
• Ülekandeliinide arv: 5
• Kaal (kg): 0,16
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 09SKV858

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Transmission Type: Automatic Transmission
• Manufacturer: BOSCH

• Lambda Sensor: Regulating Probe, Lambda Sensor, Heated
• Fitting Position: before catalytic converter
• Engine Code: AZF
• Cable Length [mm]: 340
• Manufacturer: DELPHI