Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle,
Wheel Side - Internal Toothing wheel side: 30
- External Toothing wheel side: 36
- Joint Type: CV Joint
- Manufacturer: JP GROUP
-
Lisainfo: CV joint kit,
front, outer -
Additional information: CV joint kit,
front, outer
- Internal Toothing differential side, conn. to transmission: 33
- Diameter 1 [mm]: 93
- Manufacturer: BGA
Fitting Position: Front Axle Left, Front Axle Right, transmission sided
- Fitting Position: Wheel Side
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Fabrication Number: NPZ-
SK- 005 - Manufacturer: NTY
Fitting Position: Front Axle Left, Front Axle Right, transmission sided Transmission Type: 5-Speed Manual Transmission, Automatic Transmission, 4-Speed Automatic Transmission, Manual Transmission, 6-Speed Manual Transmission
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fabrication Number: NPW-
VW- 005 - Manufacturer: NTY
Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, 4-Speed Automatic Transmission, Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 50.75
- Length [mm]: 113.5
- Fitting Position: Wheel Side
-
Specification: Groove type:
OUTER - Manufacturer: JAPKO
- Fitting Position: Wheel Side
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 50.5
- Length [mm]: 113.5
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side - Manufacturer: BGA
- Vehicle Equipment: for vehicles with electric power steering
-
Fitting Position: Wheel Side,
Front Axle, Front Axle Left -
Thread Size: M16 x 1,
5 - External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
-
Name: LIIGENDLAAGER,
VEOVOLL - Manufacturer: MAX
- Fitting Position: Wheel Side
- Number of Teeth, ABS ring: 45
- Joint Type: CV Joint
- External Toothing wheel side: 38
- Internal Toothing wheel side: 27
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Fitting Position: Front Axle
- Length [mm]: 545
- External Toothing wheel side: 36
- External Toothing differential side: 30
- Seal Diameter [mm]: 50.8
-
Specification: BELL PIN LENGTH -
59 - Manufacturer: MAGNETI MARELLI
- Name: MM TOJ0029
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side -
Transmission Type: 5-
Speed Manual Transmission - Length [mm]: 113.5
-
Thread Size: M16X1,
5 - External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 50.8
- Manufacturer: DRIVE
-
Fitting Position: Wheel Side,
Front Axle -
Thread Size: M16x1,
5 - External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Joint Type: CV Joint
-
Name: Outer CV-
joint - Quality class: PJ
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
- Quantity: 2
- Fitting Position: Front Axle
- Internal Toothing wheel side: 33
- General Information: c.v.joint; inner; Inner tooth33mm
- Manufacturer: VIKA
-
Fitting Position: Front Axle,
Wheel Side -
Transmission Type: 5-
Speed Manual Transmission - Joint Type: CV Joint
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Bellows Material: Thermoplast
- SVHC: No SVHC present!
-
Name: Liigendlaager,
veovoll - Manufacturer: FAG
-
Fitting Position: Front Axle,
Wheel Side - Length [mm]: 113.5
- External Toothing wheel side: 36
- Seal Diameter [mm]: 50.75
- Internal Toothing wheel side: 30
- Weight [kg]: 2.182
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 104.5
- Outer Diameter [mm]: 90
-
External Thread Size: M16 x 1,
5 - External Toothing wheel side: 36
- Internal Toothing wheel side: 30
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Seal Diameter [mm]: 72
- Weight [kg]: 2.03
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Right,
Left, Front Axle - Vehicle Equipment: for vehicles without power steering
- Joint Type: Disc Joint
- Inner Diameter 2 [mm]: 94
- External Toothing differential side: 33
- Length 2 [mm]: 32
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN IJK54.007
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles with electric power steering
- Thread Size: M16x1.5
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Bellows Material: Rubber
-
Name: LIIGENDLAAGER,
VEOVOLL - Manufacturer: MEP
- Fitting Position: Wheel Side
- Vehicle Equipment: for vehicles with electric power steering
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Manufacturer: LPR
- Quantity: 2
- Fitting Position: Front Axle
- Internal Toothing wheel side: 30
- External Toothing wheel side: 36
- General Information: c.v.joint; outer; Inner tooth30mm; outer tooth36mm
- Manufacturer: VIKA
-
Thread Size: M16x1,
5 - Seal Diameter [mm]: 50.75
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Version: 6 balls
- Length 2 [mm]: 113.5
- Fitting Position: outer
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN OJK54.008
- Fitting Position: transmission sided
- Joint Type: CV Joint
- Drive Shaft: without ABS ring
- Length [mm]: 32
- Internal Toothing differential side, conn. to conn. shaft: 33
- Outer Diameter [mm]: 94
-
Name: LIIGENDLAAGER,
VEOVOLL - Manufacturer: MEY
-
Fitting Position: transmission sided,
Front Axle - Length [mm]: 32
- Bore Ø [mm]: 8.2
- Internal Toothing differential side, conn. to conn. shaft: 33
- Number of bores: 6
- Outer Diameter [mm]: 94
- Bolt Hole Circle Ø [mm]: 78
- Joint Type: Disc Joint
-
Machined: with groove in inner part
(inside) - Name: SK VKJA8002
- Manufacturer: SKF
-
Fitting Position: Wheel Side,
Front Axle -
Thread Size: M16x1,
5 - External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Joint Type: CV Joint
-
Machined: with groove in inner part
(inside) - Dust Cover: with dust cover
- Manufacturer: SKF
- Name: SK VKJA5265
-
Fitting Position: Front Axle,
Wheel Side - Weight [kg]: 2.102
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Seal Diameter [mm]: 52
- Outer Diameter [mm]: 90
- Joint Type: CV Joint
- Packaging length [cm]: 18
- Packaging width [cm]: 10.5
- Packaging height [cm]: 10.5
- Manufacturer: FEBEST