Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle,
inner, Lower, Front - Hulgaühik: Tükk
-
Laagritüüp: Kummi-
metalllaager -
Netokaal [kg]: 0,
13 -
Name: Puks -
Kndmik VW P. GOLF/ PAS - Manufacturer: NK
-
Fitting Position: Front Axle,
Lower, Front - Siseläbimõõt 1 [mm]: 12
- Välisläbimõõt 1 [mm]: 33
- Jämedus/Tugevus 1 (mm): 54
- Manufacturer: DELPHI
-
Fitting Position: Lower,
Lower Front Axle - OE-numbri jaoks: 191 407 182
- Manufacturer: GSP
-
Vehicle Identification Number (VIN) from: 5J-
85069021 -
Installatsiooni pool: ees,
esisild vasakul, esisild paremal - Jämedus/Tugevus (mm): 54
- Kõrgus (mm): 54
- Välisläbimõõt 1 [mm]: 33
- Välisläbimõõt 2 [mm]: 36
- Siseläbimõõt 1 [mm]: 12
- Manufacturer: BGA
-
Installatsiooni pool: esisild alla,
ees - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front, front -
Additional information: Rubber mount for wishbone,
front, front
-
Fitting Position: Lower,
Front Axle Left, Front Axle Right -
Material: Steel,
Rubber/ Metal - Thickness [mm]: 54
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 36,
33 - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
- Jämedus/Tugevus (mm): 54
- Siseläbimõõt [mm]: 12
-
Välisläbimõõt [mm]: 33,
36 -
Materjal: Kumm/
metall -
Installatsiooni pool: esisild vasakul,
ees, esisild paremal -
Kaal (kg): 0,
1 -
Name: Puks -
Kndmik VW P. GOLF/ PAS - Manufacturer: FEB
Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: ees,
all, esisild vasakul, esisild paremal - Kõrgus (mm): 54
- Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 33
- Piirangutega toode/piirangu info: ilma kinnituseta
- vajaminev tükihulk: 2
- soovitatav vahetada paarikaupa:
-
Name: Puks -
Kndmik VW P. GOLF 84- / PASSAT 88- 97 - Manufacturer: MEY
-
Fitting Position: Front Axle,
both sides -
Mounting Type: Rubber-
Metal Mount -
Fabrication Number: ZTP-
VW- 007A - Manufacturer: NTY
- Quantity: 2
- Fitting Position: Front
- General Information: bonded rubber bush; front; small
- Manufacturer: VIKA
-
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Installatsiooni pool: esisild vasakul,
esisild paremal, all, ees, sees - Pikkus (mm): 54
- Siseläbimõõt [mm]: 12
- Hulk telje kohta: 2
- Manufacturer: TRW
- OE-numbri jaoks: 191407182
-
Installatsiooni pool: all,
ees, Esisild - vajaminev tükihulk: 2
- Materjal: Metall
- Kaal (g): 114
- Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 33
- Pikkus (mm): 54
- Name: IM 32200
- Manufacturer: ORIGINAL IMPERIUM
-
Installatsiooni pool: all,
Esisild, kahepoolne, ees - Kõrgus (mm): 54
- Välisläbimõõt 1 [mm]: 33
- Välisläbimõõt 2 [mm]: 36
- Manufacturer: KAMOKA
- Jämedus/Tugevus (mm): 54
- Siseläbimõõt [mm]: 12
-
Välisläbimõõt [mm]: 33,
36 -
Materjal: Kumm/
metall, Metall -
Installatsiooni pool: esisild vasakul,
ees, esisild paremal -
Kaal (kg): 0,
11 - Name: SW 30 69 0002
- Manufacturer: SWAG
Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) to: 5J8B600704
-
Fitting Position: Front Axle,
Centre -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.14
-
Name: DY 37-
07620- 5 - Manufacturer: DYS
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
- Fitting Position: Front
- General Information: bonded rubber bush; front
- Manufacturer: BORSEHUNG
-
Fitting Position: Front Axle,
Lower, Front - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
- Height [mm]: 54
- Name: ALT 80941AL
- Manufacturer: ALTE AUTOMOTIVE
- Quantity per packing unit: 10
- Sillamõõtmine pärast paigaldust vajalik:
-
Installatsiooni pool: kahepoolne,
ees, esisild alla - Roolimisliik: õõtshoova jaoks
-
Laagritüüp: Kummi-
metalllaager -
Kaal (kg): 0,
121 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
Front -
Vehicle Identification Number (VIN) from: 5J-
8B600705, 5J- 85069021 -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
- Siseläbimõõt [mm]: 12
-
Välisläbimõõt [mm]: 32,
5 - Laius (mm): 55
- SVHC: SVHS aineid ei esine
- Name: Puks
- Manufacturer: FAG
-
Fitting Position: Front Axle both sides,
Front, Lower - Required quantity: 2
- paaris tootenumbrid: VKDS 331002
- Manufacturer: SKF
- Name: SK VKDS331002
-
paaris tootenumbrid: 72-
1687 - Jämedus/Tugevus (mm): 41
- Siseläbimõõt [mm]: 13
-
Välisläbimõõt [mm]: 60,
27 -
Materjal: Kumm/
metall -
Installatsiooni pool: Esisild,
taga - OE-numbri jaoks: 1J0 407 181
- Hooldusinfot jälgida:
-
Name: Puks -
Kndmik VW P. GOLF4/ A3 - Manufacturer: MAX
-
Fitting Position: Front Axle,
Rear -
Vehicle Identification Number (VIN) from: 5J-
8B600705, 5J- 85069021 -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
- Siseläbimõõt [mm]: 13
- Välisläbimõõt [mm]: 60
- Manufacturer: DELLO AUTOMEGA
-
paaris tootenumbrid: 72-
0690 - Jämedus/Tugevus (mm): 41
- Siseläbimõõt [mm]: 13
-
Välisläbimõõt [mm]: 60,
27 -
Materjal: Kumm/
metall -
Installatsiooni pool: Esisild,
taga - OE-numbri jaoks: 1J0 407 181
- Hooldusinfot jälgida:
-
Name: Puks -
Kndmik VW P. GOLF4/ A3 - Manufacturer: MAX
-
Vehicle Identification Number (VIN) from: 5J_85069021,
5J_8B600705 -
Siseläbimõõt [mm]: 12,
1 -
Välisläbimõõt [mm]: 32,
4 - Pikkus (mm): 54
- paaris tootenumbrid: 270315
-
Kaal (kg): 0,
09 -
Montaažiinfo: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: in front of axle, Front Axle Left, Front Axle Right, inner, Lower
-
Fitting Position: Front Axle,
both sides, inner, Front -
Kaal (kg): 0,
1 - vajaminev tükihulk: 2
- Roolimisliik: Õõtshoob
-
Laagritüüp: Kummi-
metalllaager - pakendi pikkus [cm]: 11
- pakendi laius [cm]: 6
- pakendi kõrgus [cm]: 6
- Manufacturer: MONROE
-
Fitting Position: Rear,
Lower Front Axle -
Fabrication Number: ZTP-
VW- 001H - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle both sides,
Lower, Front - Inner Diameter [mm]: 12.2
- Length [mm]: 54
- Weight [kg]: 0.11
- Manufacturer: RTS
-
Fitting Position: Front Axle Left,
Front Axle Right, Rear, Lower -
Material: Rubber/
Metal - for OE number: 1J0 407 181
- Thickness [mm]: 41
- Inner Diameter [mm]: 13
-
Outer Diameter [mm]: 60,
27 - Manufacturer: MERTZ
-
Fitting Position: Front Axle,
Rear -
Vehicle Identification Number (VIN) from: 5J-
8B600705, 5J- 85069021 -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Siseläbimõõt [mm]: 12,
5 - Välisläbimõõt [mm]: 60
- Laius (mm): 41
- SVHC: SVHS aineid ei esine
- Name: Puks
- Manufacturer: FAG
Lisainfo: Rubber mount for wishbone, front
-
Fitting Position: Right,
Left -
Installatsiooni pool: Esisild,
all - Kogupikkus [mm]: 41
-
Välisläbimõõt [mm]: 60,
2 -
Siseläbimõõt [mm]: 13,
2 -
Kaal (kg): 0,
1 - Manufacturer: CORTECO
-
Fitting Position: Front Axle,
inner, Lower, behind the axle - Hulgaühik: Tükk
-
Laagritüüp: Kummi-
metalllaager -
Netokaal [kg]: 0,
13 -
Name: Puks -
Kndmik VW P. GOLF4/ A3 LE/ PR TYLNA - Manufacturer: NK
- Installatsiooni pool: taga
- Jämedus/Tugevus (mm): 51
- Välisläbimõõt [mm]: 63
- Manufacturer: KAMOKA
-
Fitting Position: Rear,
Lower, Front Axle both sides - Required quantity: 2
- paaris tootenumbrid: VKDS 331001
- Manufacturer: SKF
- Name: SK VKDS331001
-
Fitting Position: Front Axle,
Rear, Lower - Siseläbimõõt 1 [mm]: 13
- Välisläbimõõt 1 [mm]: 60
- Jämedus/Tugevus 1 (mm): 41
- Manufacturer: DELPHI
- Name: DE TD287W
- Vehicle Identification Number (VIN) to: 5J8B600704
- Fitting Position: both sides
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.12
-
Name: DY 37-
06068- 8 - Manufacturer: DYS
-
Kaal (kg): 0,
112 - vajaminev tükihulk: 2
- Välisläbimõõt [mm]: 63
- Siseläbimõõt [mm]: 19
-
Installatsiooni pool: Esisild,
taga, kahepoolne - Piirangutega toode/piirangu info: ilma põhitalata
- Roolimisliik: õõtshoova jaoks
- Manufacturer: TEDGUM
- Name: TG 00726011
- Additional information: 00726011
- Lisainfo: 00726011
- Jämedus/Tugevus (mm): 41
- Siseläbimõõt [mm]: 13
-
Välisläbimõõt [mm]: 60,
27 -
Materjal: Kumm/
metall -
Installatsiooni pool: esisild paremal,
esisild vasakul, all, taga -
Kaal (kg): 0,
108 - Hooldusinfot jälgida:
-
Name: Puks -
Kndmik VW P. GOLF4/ A3 LE/ PR TYLNA - Manufacturer: FEB
Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: paremal,
Esisild - Materjal: Metall
- Roolimisliik: õõtshoova jaoks
- Kaal (g): 121
- Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 60
- Pikkus (mm): 45
- pikkus üle kõige (mm): 64
- Name: IM 1634
- Manufacturer: ORIGINAL IMPERIUM
- Quantity per packing unit: 4
- Fitting Position: Lower Front Axle
- Weight [kg]: 0.105
- Height 1 [mm]: 23.4
- Height 2 [mm]: 41
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 59.8
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 105
- Manufacturer: METALCAUCHO
-
Fitting Position: Lower,
Lower Front Axle - OE-numbri jaoks: 1J0 407 181
- Manufacturer: GSP
- Jämedus/Tugevus (mm): 41
- Siseläbimõõt [mm]: 13
-
Välisläbimõõt [mm]: 60,
27 -
Materjal: Kumm/
metall -
Installatsiooni pool: esisild paremal,
esisild vasakul, all, taga -
Kaal (kg): 0,
104 - OE-numbri jaoks: 1J0 407 181
- Name: SW 32 69 0009
- Manufacturer: SWAG
- Lisainfo: 32 69 0009 SWA
- Additional information: 32 69 0009 SWA
Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 5J-
85069021 - Jämedus/Tugevus (mm): 41
- Kõrgus (mm): 41
- Välisläbimõõt 1 [mm]: 27
- Välisläbimõõt 2 [mm]: 60
- Siseläbimõõt 1 [mm]: 13
- Manufacturer: BGA
Installatsiooni pool: taga, esisild vasakul, esisild paremal, esisild alla
- Fitting Position: Rear
- General Information: bonded rubber bush; rear
- Manufacturer: BORSEHUNG
- Roolimisliik: õõtshoova jaoks
-
Laagritüüp: Kummi-
metalllaager -
Installatsiooni pool: esisild vasakul,
esisild paremal, all, taga, sees - Pikkus (mm): 41
- Välisläbimõõt [mm]: 60
- Siseläbimõõt [mm]: 13
- Hulk telje kohta: 2
-
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Manufacturer: TRW
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
-
Installatsiooni pool: taga,
all, esisild vasakul, esisild paremal - Kõrgus (mm): 41
- Siseläbimõõt [mm]: 13
- Välisläbimõõt [mm]: 60
- Piirangutega toode/piirangu info: ilma kinnituseta
- vajaminev tükihulk: 2
- soovitatav vahetada paarikaupa:
-
Name: Puks -
Kndmik VW P. GOLF4/ A3 LE/ PR TYLNA - Manufacturer: MEY
-
Fitting Position: Front Axle,
Rear -
Vehicle Identification Number (VIN) to: 5J-
8- B600704, 5J- 8- 5069020 - Siseläbimõõt [mm]: 18
- Välisläbimõõt [mm]: 64
- Laius (mm): 50
- SVHC: SVHS aineid ei esine
- Name: Puks
- Manufacturer: FAG
- Vehicle Identification Number (VIN) to: 5J8B600705
-
Fitting Position: Front Axle,
outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.1
-
Name: DY 37-
06106- 6 - Manufacturer: DYS
-
Fitting Position: Front Axle,
Lower, Front - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
- Height [mm]: 54
- Name: ALT 82940AL
- Manufacturer: ALTE AUTOMOTIVE
-
Installatsiooni pool: all,
Esisild, kahepoolne, taga - Välisläbimõõt [mm]: 60
- Kõrgus 1 (mm): 25
- Kõrgus 2 (mm): 41
- Manufacturer: KAMOKA
- Siseläbimõõt [mm]: 18
-
Installatsiooni pool: kahepoolne,
Esisild, taga -
Kaal (kg): 0,
145 - vajaminev tükihulk: 2
- tugevdatud variant:
-
Välisläbimõõt [mm]: 62,
1 - Manufacturer: TEDGUM
- Name: TG 00726013
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle both sides,
Lower, Rear - Outer Diameter [mm]: 59.6
- Inner Diameter [mm]: 13
- Length [mm]: 41
- Weight [kg]: 0.11
- Manufacturer: RTS
-
Vehicle Identification Number (VIN) from: 5J_85069021,
5J_8B600705 - Inner Diameter [mm]: 13
- Outer Diameter [mm]: 59.5
- Length [mm]: 41
- paired article number: 270318
- Weight [kg]: 0.11
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: behind the axle, Front Axle Right, Front Axle Left, Lower
-
Fitting Position: Front Axle,
Front -
Vehicle Identification Number (VIN) to: 5J...8B600704,
5J...85069021 - Block Separation:
-
Siseläbimõõt [mm]: 12,
2 - Välisläbimõõt 1 [mm]: 40
- Välisläbimõõt 2 [mm]: 33
- Laius (mm): 54
- SVHC: SVHS aineid ei esine
- Name: LU 829059910
- Manufacturer: FAG
- OE-numbri jaoks: 1E0199733A
-
Installatsiooni pool: taga,
all, Esisild - vajaminev tükihulk: 2
-
Materjal: Kumm/
metall - Kaal (g): 125
- Siseläbimõõt [mm]: 13
- Välisläbimõõt [mm]: 60
- Pikkus (mm): 41
- Name: IM 1710
- Manufacturer: ORIGINAL IMPERIUM
- Roolimisliik: õõtshoova jaoks
-
Installatsiooni pool: kahepoolne,
taga, esisild alla - Sillamõõtmine pärast paigaldust vajalik:
-
Laagritüüp: Kummi-
metalllaager -
Kaal (kg): 0,
12 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
Lower, Rear - Inner Diameter [mm]: 13
- Outer Diameter [mm]: 60
- Height [mm]: 41
- Name: ALT 80942AL
- Manufacturer: ALTE AUTOMOTIVE
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
SKODA FABIA/POLO 02-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
SKODA FABIA/POLO 02-
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle both sides,
Lower, Rear - Inner Diameter [mm]: 31
- Outer Diameter [mm]: 64
- Height [mm]: 52
- Name: ALT 83559AL
- Manufacturer: ALTE AUTOMOTIVE
-
Vehicle Identification Number (VIN) to: 5J-
8B600 7, 5J- 85069 0 -
Fitting Position: Front Axle both sides,
Lower, Front -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter 2 [mm]: 12.2
- Length [mm]: 54
- Weight [kg]: 0.126
- Manufacturer: RTS
- Braking/Driving Dynamics: for vehicles without ABS
- Model Year from: 2011
-
Installatsiooni pool: ees,
esisild alla -
Kaal (kg): 0,
12 -
pakendi pikkus [cm]: 5,
4 -
pakendi laius [cm]: 3,
6 -
pakendi kõrgus [cm]: 3,
6 - Manufacturer: FEBEST
-
Fitting Position: Front Axle,
Lower, Rear - Inner Diameter [mm]: 26
- Outer Diameter [mm]: 71
- Height [mm]: 51.5
- Name: ALT 86132AL
- Manufacturer: ALTE AUTOMOTIVE
-
Vehicle Identification Number (VIN) from: 5J-
8B600 705, 5J- 85069 021 -
Installatsiooni pool: Esisild,
kahepoolne, taga - Roolimisliik: õõtshoova jaoks
-
Laagritüüp: Kummi-
metalllaager - Hulk telje kohta: 2
-
soovitava lisavarustuse artiklinumber: 44090 01,
44091 01 - Hooldusinfot jälgida:
-
Name: Puks -
Kndmik VW P. GOLF4/ A3 LE/ PR TYLNA - Manufacturer: LMI
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
SEAT IBIZA/CORDOBA
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
SEAT IBIZA/CORDOBA
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
inner, Rear - Laius (mm): 41
-
Kaal (kg): 0,
13 - vajaminev tükihulk: 2
- Siseläbimõõt [mm]: 13
- Välisläbimõõt [mm]: 60
- Roolimisliik: Õõtshoob
-
Laagritüüp: Kummi-
metalllaager - pakendi pikkus [cm]: 11
- pakendi laius [cm]: 6
- pakendi kõrgus [cm]: 6
- Manufacturer: MONROE
-
Installatsiooni pool: kahepoolne,
taga, all, Esisild - vajaminev tükihulk: 2
- tugevdatud variant:
- Siseläbimõõt [mm]: 13
-
Kaal (kg): 0,
121 -
Välisläbimõõt [mm]: 60,
1 - Name: Puks
- Manufacturer: TED
- Quantity per packing unit: 4
-
Fitting Position: Lower Front Axle,
Rear - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Kvaliteet: OE Exact
-
Installatsiooni pool: ees,
kahepoolne - Värv: hõbedane
- Kaal (g): 109
- Manufacturer: GATES
-
Fitting Position: Front Axle both sides,
Lower, Rear - Mounting Type: Rubber Mount
- Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 19
- Outer Diameter [mm]: 64
- Weight [kg]: 0.138
- Length [mm]: 52
- Manufacturer: RTS
-
Fitting Position: Front Axle,
Rear - Kvaliteet: OE Exact
- Värv: hõbedane
- Kaal (g): 114
- Manufacturer: GATES
-
Kaal (kg): 0,
115 - Piirangutega toode/piirangu info: ilma põhitalata
- Siseläbimõõt [mm]: 20
-
Installatsiooni pool: Esisild,
kahepoolne, taga - vajaminev tükihulk: 2
- tugevdatud variant:
-
Välisläbimõõt [mm]: 63,
6 - Manufacturer: TEDGUM
- Name: TG 00721398
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Material: Rubber/
Metal - Thickness [mm]: 90
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 72
- Manufacturer: MERTZ
- General Information: sleeve
- Manufacturer: VIKA
- Model Year from: 2011
-
Kaal (kg): 0,
19 - Hulk: 2
-
pakendi pikkus [cm]: 9,
2 -
pakendi laius [cm]: 2,
5 -
pakendi kõrgus [cm]: 2,
5 - Manufacturer: FEBEST
-
for PR number: G02,
G03, G04, G38, G39, G40, G41 - Model Year from: 2011
-
Installatsiooni pool: taga,
esisild alla -
Kaal (kg): 0,
189 -
pakendi pikkus [cm]: 6,
1 -
pakendi laius [cm]: 6,
1 -
pakendi kõrgus [cm]: 4,
1 - Manufacturer: FEBEST
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.09
-
Name: DY 37-
22817 - Manufacturer: DYS
-
Siseläbimõõt [mm]: 18,
6 - Välisläbimõõt [mm]: 63
- Pikkus (mm): 53
- paaris tootenumbrid: 271126
-
Kaal (kg): 0,
13 -
Montaažiinfo: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: behind the axle, Front Axle Left, Front Axle Right, inner
- Quantity: 2
- Fitting Position: Front
- General Information: Bush kit for control arm; 4pcs
- Manufacturer: VIKA
- Installatsiooni pool: esisild vasakul
- Roolimisliik: Õõtshoob
- Manufacturer: MAGNETI MARELLI
- Installatsiooni pool: esisild paremal
- Roolimisliik: Õõtshoob
- Manufacturer: MAGNETI MARELLI
-
Installatsiooni pool: taga,
esisild alla, kahepoolne - Värv: kollane
-
Materjal: PU
(Polyurethan) - Shore-A tugevuskarakteristik, lähteühend: 90
- vajaminev tükihulk: 2
- Siseläbimõõt [mm]: 13
-
Kaal (kg): 0,
248 - Välisläbimõõt [mm]: 60
- Piirangutega toode/piirangu info 2: koos rasvakattega
- Name: TG TED87339
- Manufacturer: TEDGUM
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"
- Roolimisliik: õõtshoova jaoks
- Värv: punane
- Piirangutega toode/piirangu info: ilma põhitalata
-
Installatsiooni pool: Esisild,
kahepoolne, taga - Shore-A tugevuskarakteristik, lähteühend: 80
-
Kaal (kg): 0,
3 - Siseläbimõõt [mm]: 18
-
Välisläbimõõt [mm]: 62,
1 - tugevdatud variant:
- vajaminev tükihulk: 2
-
Materjal: PU
(Polyurethan) - Manufacturer: TEDGUM
- Name: TG 00727181
- Fitting Position: Front Axle Left
-
paired article number: ZWD-
VW- 001B - Material: Aluminium
-
Fabrication Number: ZWD-
VW- 001A - Manufacturer: NTY
-
Name: NTY ZWD-
VW- 001A
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle Right
- Material: Aluminium
-
Fabrication Number: ZWD-
VW- 001B -
paired article number: ZWD-
VW- 001A - Manufacturer: NTY
-
Name: NTY ZWD-
VW- 001B
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle Left
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Front Axle Right
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks