• Overall Length [mm]: 420
• Number of circuits: 5
• Oxygen Sensor: Thread pre-greased
• Fabrication Number: ESL-SB-000
• Manufacturer: NTY

• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAG

• Engine Code: EJ25
• Number of pins: 2
• Manufacturer: KAVO

• for OE number: 89424-87703-000
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-MZ-000
• Manufacturer: NTY
• Name: NTY ECT-MZ-000

• Engine Code: EJ25
• Supplementary Article/Info 2: without connector parts
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Sensor Type: NTC Sensor
• for OE number: BP4W18845
• Manufacturer: MEAT&DORIA

• Country Specific Design: Europe
• Fabrication Number: ESS-SB-000
• Manufacturer: NTY

• Engine Code: EJ25
• Supplementary Article/Info 2: without fastening clamp
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Fabrication Number: ECP-SB-000
• Number of pins: 2
• Manufacturer: NTY

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Engine Code: EJ25
• Supplementary Article/Info 2: without fastening clamp
• Manufacturer: FACET

• Engine Code: EJ25
• Manufacturer: FAE
• Additional information: 33235 NRF
• Lisainfo: 33235 NRF

• Engine Code: EJ25
• Number of pins: 2
• Manufacturer: JPN

• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 60
• Number of pins: 4
• Guarantee: 3 years guarantee
• Pressure from [kPA]: 20
• Pressure to [kPA]: 115
• Weight [kg]: 0.05
• Material: Plastic
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV150
• Lisainfo: 17SKV150 SKV
• Additional information: 17SKV150 SKV

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 2
• Manufacturer: KAVO

• Construction Year to: 06.2000
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Construction Year to: 04.2003
• Engine Code: EJ251
• Sensor Type: Hall Sensor
• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• not for country specific design: Europe
• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-SB-006
• Manufacturer: NTY

• Engine Code: EJ25
• Construction Year to: 08.2000
• Oxygen Sensor: Diagnostic Probe, Oxygen Sensor
• Fitting Position: after catalytic converter
• Transmission Type: Automatic Transmission
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of pins: 1
• Connector Shape: oval
• Socket colour: white
• Cable Length [mm]: 160
• Length [mm]: 195
• for OE number: 22060AA070
• Manufacturer: MEAT & DORIA

• Oxygen Sensor: Regulating Probe
• Number of circuits: 3
• Manufacturer: KAMOKA

• Engine Code: EJ25
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 20
• Pressure to [kPA]: 115
• for OE number: 3933026300
• Manufacturer: MEAT&DORIA

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU013122341
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Construction Year to: 06.2000
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 3
• Socket colour: white
• Number of circuits: 3
• Connector Shape: oval
• Cable Length [mm]: 370
• Thread Size: M18 x 1,5
• for OE number: 22690-AA740
• Length [mm]: 460
• Fitting Position: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: OYODO

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV121

• Fitting Position: Front, before catalytic converter
• for OE number: 22690AA740
• Length [mm]: 500
• Thread Size: M18x1.5-6e
• Number of pins: 3
• Oxygen Sensor: Heated, Planar probe
• Manufacturer: KAVO

• Construction Year to: 06.2003
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Transmission Type: Automatic Transmission
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: ENERGY

• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 460
• Guarantee: 3 years guarantee
• Number of circuits: 3
• Weight [kg]: 0.13
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV661

• Construction Year to: 06.2000
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Quality: OE
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"

• Fitting Position: Front, before catalytic converter
• not for country specific design: Europe
• Supplementary Article/Info 2: without potentiometer
• Length [mm]: 450
• Thread Size: M18x1.5-6e
• Number of pins: 4
• Oxygen Sensor: Heated, Planar probe
• Manufacturer: KAVO

• Construction Year from: 07.2000
• Construction Year to: 12.2002
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Construction Year to: 06.2003
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Transmission Type: Automatic Transmission
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: after catalytic converter
• Cable Length [mm]: 460
• Oxygen Sensor: Finger probe, Heated
• Manufacturer: DELPHI
• Name: DE ES10301-12B1

• Number of connectors: 2
• Fitting Position: Front
• Weight [kg]: 0.06
• for OE number: 22056AA063
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: METZGER

• Number of pins: 2
• Manufacturer: FAE

• Construction Year to: 03.2002
• Number of pins: 1
• Housing Colour: white
• Manufacturer: FAE

• Number of connectors: 1
• Weight [kg]: 0.001
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 12.1998
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Number of connectors: 1
• Weight [kg]: 0.001
• Name: DETONATSIOONIANDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.2000
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Construction Year to: 06.2000
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 470
• Available as universal article as well, see article no.: 0258005726
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH
• Lisainfo: F00HL00053 BOSCH
• Additional information: F00HL00053 BOSCH

• Number of pins: 3
• Pressure to [kPA]: 107
• Manufacturer: FAE

• Oxygen Sensor: Regulating Probe, Planar probe
• Model Year from: 2002
• Model Year to: 2003
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of connectors: 4
• Cable Length [mm]: 505
• Weight [kg]: 0.083
• Name: SW 33 10 6807
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 435
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Engine Code: EJ25
• Line insulation design: with silicone-coated woven-fibre insulation
• for OE number: 22690-AA540
• Number of pins: 4
• Connector Shape: oval
• Number of circuits: 4
• Socket colour: white
• Fitting Position: after catalytic converter
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Construction Year from: 09.2001
• Construction Year to: 08.2002
• Voltage [V]: 12
• Length [mm]: 500
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV862

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 580
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.16
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV853

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY
• Name: CE 09SKV915

• Construction Year from: 09.1999
• Construction Year to: 08.2000
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Transmission Type: Automatic Transmission
• Number of circuits: 5
• Overall Length [mm]: 460
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year from: 07.2000
• Construction Year to: 04.2002
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 420
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 02.2002
• Construction Year to: 04.2003
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 510
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 22641AA230
• Quality: OE
• Weight [g]: 108
• Gross Weight [g]: 141
• Manufacturer: DENSO
• Name: DN DOX-0307
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Broadband oxygen sensor, Thread pre-greased Additional information: "Tootja: DENSO
LEGACY III KOMBI (BE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
LEGACY III KOMBI (BE
(kvaliteediklass: Q)"

• Operating Mode: Electric
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• Sensor Type: Inductive Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 2
• Fitting Depth [mm]: 26.2
• Supplementary Article/Info 2: with seal ring