Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: 3/8"-19BSP
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: MD182467
• Manufacturer: MEAT&DORIA

• Thread Size: 3/8 x 19 BSP
• Colour: black
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: 3/8x19 BSP
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Colour: black
• Number of pins: 4
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Fabrication Number: ESS-FT-002
• Manufacturer: NTY

• Engine Code: M 135.950
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Manufacturer: FACET

• for OE number: MN195775
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Fabrication Number: ECM-MS-001
• Manufacturer: NTY

• Engine Code: M 135.950
• Thread Size: 3/8-GAS
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Manufacturer: FAST

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year from: 04.2004
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV108

• for OE number: A 005 153 61 28
• Number of pins: 4
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Suction Pipe
• Connector Shape: oval
• Number of pins: 4
• Sensor Type: NTC Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Length [mm]: 55
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Engine Code: M 135.950
• Manufacturer: FACET

• Number of pins: 4
• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550305
• Manufacturer: ERA

• Engine Code: M 135.950
• Name: EP 1.957.006
• Manufacturer: EPS

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114441

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 115
• Measuring Range from [V]: 0.4
• Measuring Range to [V]: 4.65
• Number of connectors: 4
• Manufacturer: VERNET

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Sensor Type: Piezoelectric Sensor
• Number of pins: 2
• Name: Detonatsiooniandur
• Manufacturer: MEY

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Thread Size: M18x1.5
• Cable Length [mm]: 475
• Number of pins: 4
• Fabrication Number: ESL-MS-008
• Manufacturer: NTY

Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Length [mm]: 52
• Inner Diameter [mm]: 8.4
• Number of connectors: 2
• Material: Plastic, Metal
• Weight [kg]: 0.045
• Name: DETONATSIOONIANDUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 43.45
• Outer Diameter [mm]: 12.9
• Number of connectors: 4
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• for OE number: 006 153 47 28
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Number of pins: 3
• Sensor Type: Hall Sensor
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Engine Code: M 135.950
• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Output Voltage, from [V]: 0.385
• Output Voltage, up to [V]: 4.7
• Manufacturer: FACET

• Engine Code: M 135.950
• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Output Voltage, from [V]: 0.385
• Output Voltage, up to [V]: 4.7
• Name: EP 1.993.091
• Manufacturer: EPS

• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: BOS

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 450
• Manufacturer: DELPHI
• Name: DE ES20644-12B1

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Oxygen Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Outer Diameter [mm]: 55
• Number of connectors: 3
• Weight [kg]: 0.002
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 54.5
• Number of connectors: 3
• Weight [kg]: 0.002
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR, VŽNTVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 370
• Name: DE ES21319-12B1
• Manufacturer: DELPHI

• Length [mm]: 54.5
• Number of connectors: 3
• Weight [kg]: 0.002
• Supplementary Article/Info 2: with seal ring
• Name: SW 80 93 2088
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 135.950
• Line insulation design: with silicone-coated woven-fibre insulation
• Supplementary Article/Info 2: without plug
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Length [mm]: 350
• Fitting Position: after catalytic converter
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M 135.950
• Fitting Position: after catalytic converter
• Cable Length [mm]: 350
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.340
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Exhaust System: for pre-catalytic converter
• for OE number: MN128424
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 475
• Number of pins: 4
• Weight [g]: 121
• Supplementary Article/Info 2: with rubber grommet
• Gross Weight [g]: 154
• Manufacturer: DENSO

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 348
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 04.2004
• Oxygen Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 350
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: rectangular
• Name: VA 368426
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Overall Length [mm]: 478
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 26.7
• Supplementary Article/Info 2: with seal ring