• Fitting Position: Rear Axle
• Fabrication Number: ZTT-MZ-007A
• Manufacturer: NTY

• Fitting Position: outer, Rear Axle, inner, Left, Right, Lower
• Weight [g]: 102
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32
• Name: IM 1435
• Manufacturer: ORIGINAL IMPERIUM

• Required quantity: 2
• Weight [kg]: 0.152
• Fitting Position: Rear, inner, Rear Axle Lower
• Outer Diameter 2 [mm]: 32.9
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter 1 [mm]: 32.2
• Name: TG 00224452
• Manufacturer: TEDGUM
• Additional information: 00224452
• Lisainfo: 00224452

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)"

• Required quantity: 2
• Fitting Position: outer, Rear Axle Lower, Rear, both sides
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36.3
• Weight [kg]: 0.145
• Control/Trailing Arm Type: for control arm
• Manufacturer: TEDGUM_TD
• Additional information: 00224453
• Lisainfo: 00224453

• Fitting Position: Front Axle, Rear Axle
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32
• Height [mm]: 35
• Name: ALT 91242AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle Lower, inner
• Height [mm]: 55
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32
• Control/Trailing Arm Type: Trailing Arm
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Fitting Position: outer, Rear Axle Lower
• Height [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Control/Trailing Arm Type: Trailing Arm
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD FOCUS
(kvaliteediklass: PJ)"

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
VW T4 '91-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW T4 '91-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, Front, inner, both sides, outer
• Required quantity: 4
• Weight [kg]: 0.085
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 32.1
• Inner Diameter [mm]: 12
• Manufacturer: TEDGUM

• Fitting Position: outer, inner, Upper, both sides, Rear Axle
• Required quantity: 4
• Weight [kg]: 0.114
• Inner Diameter [mm]: 12
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 36.4
• Name: TG 00224288
• Manufacturer: TEDGUM
• Additional information: 00224288
• Lisainfo: 00224288

• Production date to: 2015
• Weight [kg]: 0.084
• Packaging length [cm]: 7.6
• Packaging width [cm]: 2.4
• Packaging height [cm]: 2.4
• Length [mm]: 76
• Thread Size: M12x1,75
• Manufacturer: FEBEST

• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Height [mm]: 35
• Name: ALT 91241AL
• Manufacturer: ALTE AUTOMOTIVE

• Vehicle Identification Number (VIN) to: ***********110678
• Thickness [mm]: 35
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 36
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.134
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length from [mm]: 64.5
• Diameter [mm]: 38
• Inner Diameter [mm]: 14
• Quality class: PJ
• Name: Control arm bush left=right

Fitting Position: Lower, Front Axle, Left, Right, Front Axle Left, Front Axle Right

• Fitting Position: both sides, inner, Front, outer, Rear Axle
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.253
• Supplementary Article/Info 2: with screw
• Required quantity: 4
• Manufacturer: TEDGUM_TD

• Fitting Position: Lower, Front, Rear Axle Left, Rear Axle Right
• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 36
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
MITSUB. GALANT, 93-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
MITSUB. GALANT, 93-
(kvaliteediklass: PJ)"

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MAZDA 3
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MAZDA 3
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle both sides, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Height [mm]: 45
• Name: ALT 91244AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.27
• Name: DY 37-09700-6
• Manufacturer: DYS

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Height [mm]: 65
• Name: ALT 88833AL
• Manufacturer: ALTE AUTOMOTIVE

• Weight [kg]: 0.275
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38.2
• Fitting Position: both sides, Front, Lower, Front Axle
• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Manufacturer: TEDGUM

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 54
• Inner Diameter [mm]: 14.2
• Length [mm]: 64.5
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, outer, inner, both sides, Upper
• Supplementary Article/Info 2: with screw
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.282
• Required quantity: 4
• Manufacturer: TEDGUM_TD

• Outer Diameter 1 [mm]: 38
• Inner Diameter 1 [mm]: 14
• Thickness 1 [mm]: 65
• Manufacturer: BGA

Fitting Position: Front Axle Left, Front Axle Right, Lower Front Axle

• Fitting Position: Rear Axle, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Height [mm]: 55
• Name: ALT 91245AL
• Manufacturer: ALTE AUTOMOTIVE

• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 36
• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Left, Lower, Front, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.15
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 65
• Width [mm]: 53
• Thickness [mm]: 65
• Inner Diameter [mm]: 14.7
• Outer Diameter [mm]: 43
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front, Front Axle Right
• Weight [kg]: 0.27
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 36
• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Left, Lower, Front, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.15
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Left, Right
• Weight [g]: 476
• Outer Diameter [mm]: 60
• Overall Length [mm]: 142
• Name: IM 1445
• Manufacturer: ORIGINAL IMPERIUM

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 43
• Height [mm]: 53
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

Fitting Position: Front Axle Left, Front Axle Right, both sides, inner

• Fitting Position: Front Axle, Front
• Vehicle type: V40
• Weight [kg]: 0.3
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Fitting Position: Rear Axle, Centre
• Outer Diameter [mm]: 60.3
• Manufacturer: GSP ZAWIESZENIE

• Required quantity: 2
• Weight [kg]: 0.37
• Fitting Position: Rear Axle, Front, both sides
• Control/Trailing Arm Type: for trailing arm
• Outer Diameter [mm]: 60
• Name: TG TED97335
• Manufacturer: TEDGUM

• Outer Diameter [mm]: 60.2
• Length [mm]: 38.3
• paired article number: 271591
• Weight [kg]: 0.44
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Rear Axle Left, Rear Axle Right, inner, Lower

• Fitting Position: both sides, Upper, inner, outer, Rear Axle
• Required quantity: 4
• Weight [kg]: 0.125
• Outer Diameter [mm]: 36.3
• Supplementary Article/Info 2: with grease cap
• Shore-A hardness value, base body: 80
• Material: PU (Polyurethane)
• Inner Diameter [mm]: 12
• Colour: red
• Manufacturer: TEDGUM_TD

• Fitting Position: Rear Axle, Left, Right
• Material: Rubber/Metal
• Length [mm]: 142
• Outer Diameter [mm]: 60
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Weight [kg]: 0.12
• Required quantity: 4
• Material: PU (Polyurethane)
• Supplementary Article/Info 2: with grease cap
• Shore-A hardness value, base body: 80
• Fitting Position: both sides, Lower, inner, outer, Rear Axle, Front
• Outer Diameter [mm]: 32.3
• Colour: red
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Manufacturer: TEDGUM_TD

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• for OE number: 31360696, 31360695
• Outer Diameter [mm]: 60.2
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, outer, Front, in front of axle
• for OE number: 31360695, 31360696
• Vehicle type: V40
• Weight [kg]: 0.587
• Required quantity: 2
• Control/Trailing Arm Type: Semi-Trailing Arm
• Packaging length [cm]: 13.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 7
• Manufacturer: MONROE

• Fitting Position: Front Axle Left, Lower
• Manufacturer: GSP

• Fitting Position: Lower Front Axle
• Weight [kg]: 1.37
• Overall Length [mm]: 73
• Inner Diameter [mm]: 22
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Length 1 [mm]: 92.6
• Manufacturer: METALCAUCHO

• Fitting Position: Left, Right, Front Axle
• Control/Trailing Arm Type: for control arm
• Mounting Type: Hydro Mount, Rubber-Metal Mount
• Weight [g]: 1,379
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 87
• Length [mm]: 93
• Name: IM 1443
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Thickness [mm]: 82
• Inner Diameter [mm]: 22
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Rear, Front Axle Right
• Mounting Type: Hydro Mount
• Weight [kg]: 1.399
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 82
• Inner Diameter [mm]: 22
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Rear, Front Axle Right
• Mounting Type: Hydro Mount
• Weight [kg]: 1.399
• Manufacturer: FEBI BILSTEIN
• Additional information: FE170962
• Lisainfo: FE170962

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 54
• Length [mm]: 72.5
• Mounting Type: Hydro Mount
• paired article number: 271147
• Weight [kg]: 1.39
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower

• Trim Level: EXC. DE-DK-FI-NO-SE
• Fitting Position: Rear, Lower Front Axle
• Height [mm]: 73
• Inner Diameter [mm]: 22
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Thickness [mm]: 82
• Inner Diameter [mm]: 22
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Rear, Front Axle Right
• Mounting Type: Hydro Mount
• Weight [kg]: 1.399
• Name: SW 33 10 0717
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FORD FOCUS II
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FORD FOCUS II
(kvaliteediklass: PJ)"

• Thickness [mm]: 82
• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 68
• Material: Rubber/Metal
• Fitting Position: Rear, Front Axle Left, Front Axle Right
• Weight [kg]: 1.849
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: BLUE PRINT ZAWIESZENIE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 142
• Outer Diameter [mm]: 61
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.526
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: behind the axle, Front Axle Left, inner, Lower
• Inner Diameter [mm]: 18.6
• Outer Diameter [mm]: 74
• Length [mm]: 87
• Mounting Type: Hydro Mount
• paired article number: 271373
• Weight [kg]: 1.47
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Left, Lower, Rear
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 21
• Height [mm]: 88
• paired article number: 92288AL
• Name: ALT 92287AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Right, Lower, Rear
• Inner Diameter [mm]: 19
• Height [mm]: 88
• paired article number: 92287AL
• Name: ALT 92288AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter [mm]: 60
• Control/Trailing Arm Type: for trailing arm
• Mounting Type: Rubber-Metal Mount
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Fitting Position: Front Axle, both sides, Lower, Rear
• Vehicle type: V40
• Weight [kg]: 1.2
• Required quantity: 2
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 20.5
• Packaging width [cm]: 12
• Packaging height [cm]: 12
• Manufacturer: MONROE

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 22
• Height [mm]: 71
• Name: ALT 88831AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: both sides, Rear, Front Axle
• Required quantity: 2
• Weight [kg]: 1.282
• Manufacturer: TEDGUM

• Thickness [mm]: 82
• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 68
• Material: Rubber/Metal
• Fitting Position: Rear, Front Axle Left, Front Axle Right
• Weight [kg]: 1.849
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Upper, Front, Rear Axle Left, Rear Axle Right
• Article number of recommended accessories: 45041 01, 45042 01, 45043 01
• Observe service information:
• Manufacturer: LEMFORDER
• Name: LMI 3988401

SVHC: No information available, please contact the manufacturer!