• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: JPN

• Engine Code: D 4204 T14
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: D 4204 T14
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: EPS

• Engine Code: D 4204 T14
• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: white
• Manufacturer: FAE

Manufacturer: FAST

• Engine Code: D 4204 T14
• Construction Year from: 09.2014
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• for OE number: 31370160
• Diameter 1 [mm]: 8
• Diameter 2 [mm]: 6
• Number of pins: 3
• Connector Shape: oval
• Fabrication Number: ECS-VV-000
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Fabrication Number: ECP-VV-000
• Manufacturer: NTY

• Connector Shape: oval
• Fabrication Number: ECM-VV-001
• Manufacturer: NTY

• Quantity: 1
• Number of pins: 3
• Name: DE SS12311-12B1
• Manufacturer: DELPHI

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358380691
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Connector Shape: oval
• Supplementary Article/Info 2: with seal ring
• Pressure from [bar]: 0.11
• Pressure to [bar]: 3.07
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pistikkontaktide arv: 4
• Manufacturer: JPN

• Fabrication Number: ECS-DW-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

Manufacturer: JPN

• Connector Shape: oval
• Number of pins: 3
• Fitting Position: Exhaust Manifold
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Manufacturer: ERA

• Construction Year to: 07.2018
• Manufacturer: BOSCH

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 100,000
• for OE number: 1821553SA0
• Manufacturer: NRF

• Number of pins: 4
• Pressure from [kPA]: 50
• Name: DE PS20097-12B1
• Manufacturer: DELPHI

• Engine Code: D 4204 T14
• Exhaust System: before soot particulate filter
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Number of pins: 4
• Connector Shape: oval
• Number of mounting bores: 1
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 34
• Pressure to [kPA]: 400
• Quality: OE EQUIVALENT
• for OE number: 0261230423
• Manufacturer: MEAT&DORIA

• for OE number: 31439823
• Number of pins: 2
• Connector Shape: oval
• Exhaust System: for catalytic converter
• Fabrication Number: EGT-VV-007
• Cable Length [mm]: 340
• Manufacturer: NTY

• Number of pins: 4
• Weight [kg]: 0.035
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 0.1
• Name: DE DPS00047-12B1
• Manufacturer: DELPHI

• Engine Code: D 4204 T14
• Exhaust System: before turbocharger
• Thread Size: M14x1,5
• Spanner Size: 27
• Manufacturer: FACET

• for OE number: 31439825
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Fabrication Number: EGT-VV-008
• Cable Length [mm]: 255
• Manufacturer: NTY

• Engine Code: D 4204 T14
• Exhaust System: before soot particulate filter
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: EPS

• Engine Code: D 4204 T14
• Construction Year from: 09.2014
• Number of pins: 2
• Pressure from [kPA]: 35
• Pressure to [kPA]: 400
• Manufacturer: FAE

• Engine Code: D 4204 T14
• Required quantity: 1
• Pressure from [kPA]: 29
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.48
• Manufacturer: FACET

• for OE number: 31439823
• Cable Length [mm]: 340
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Exhaust System: for catalytic converter
• Weight [kg]: 0.08
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV356

• Fitting Position: before catalytic converter
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: black
• Spanner Size: 17
• Connector Shape: oval
• Thread Pitch [mm]: 1.5
• Thread Size: M 14
• Cable Length [mm]: 440
• Overall Length [mm]: 540
• Bolt Head-/Nut Design: Hexagon
• Supplementary Article/Supplementary Info: without holder
• Shape: straight
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Exhaust System: after catalytic converter
• Cable Length [mm]: 290
• Sensor Type: PTC
• Supplementary Article/Supplementary Info: with additional hold position
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV405

• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Manufacturer: MEYLE

• Engine Code: D 4204 T14
• Transmission Code: M66, TG-81SC
• Model Year to: 2018
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Manufacturer: PIERBURG

• Voltage [V]: 12
• Manufacturer: METZGER

• Exhaust System: before soot particulate filter
• Number of circuits: 2
• Number of mounting bores: 1
• Connector Shape: oval
• Number of pins: 3
• Weight [kg]: 0.023
• for OE number: 22 77 1JG 70A
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Exhaust System: before soot particulate filter
• Alternatively:
• Number of pins: 3
• Opening pressure [kPa]: 0.35
• Manufacturer: DELPHI

• Number of connectors: 3
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.02
• for OE number: 22 77 014 54R
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Fitting Position: before soot particulate filter
• Vehicle Identification Number (VIN) to: 285851
• Block Separation:
• Vehicle Identification Number (VIN) from: 285852
• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 240
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• for OE number: A6711590058
• Alternatively:
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 3
• Number of connectors: 2
• Connector Shape: oval
• Alternative Repair Kit: 551291
• Manufacturer: ERA

• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Fitting Position: behind exhaust turbocharger
• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 35
• Cable Length [mm]: 340
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Number of pins: 3
• Fitting Position: Fuel Line
• Supplementary Article/Info 2: Low Pressure Side
• Manufacturer: METZGER

Installation Information: Note the installation instructions of the original manufacturer during assembly.

• Fitting Position: before soot particulate filter
• Required quantity: 1
• Vehicle Identification Number (VIN) from: 285852
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 240
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 515
• Number of circuits: 4
• Conductor Number: 4
• Resistor [Ohm]: 2.1
• Cable Length [mm]: 515
• Oxygen Sensor: Heated
• Name: MM OSM307
• Manufacturer: MAGNETI MARELLI

• External Thread Size: M14 x 1,5
• Number of connectors: 2
• Fitting Position: before catalytic converter
• Cable Length [mm]: 340
• Weight [kg]: 0.048
• Name: SW 33 10 9884
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Thread Size: M18x1.5
• Cable Length [mm]: 515
• Number of pins: 4
• Fabrication Number: ESL-VV-001
• Manufacturer: NTY

Fitting Position: before catalytic converter, after catalytic converter Lisainfo: ENG. 1.5-2.5 VOLVO S60 II 13-18,S80 II 06-14,S90 II 16-,XC60 13-,XC70 II 13-16,XC90 II 14-/REGULACYJNA, DLA KATALIZATORA WSTPNEGO, Dœ.KABLI 515MM Additional information: ENG. 1.5-2.5 VOLVO S60 II 13-18,S80 II 06-14,S90 II 16-,XC60 13-,XC70 II 13-16,XC90 II 14-/REGULACYJNA, DLA KATALIZATORA WSTPNEGO, Dœ.KABLI 515MM

• Exhaust System: behind turbocharger
• Cable Length [mm]: 340
• Number of pins: 2
• Manufacturer: DELPHI ELEKTRONIKA

• Voltage [V]: 12
• Fabrication Number: EPP-TY-010
• Manufacturer: NTY

• Oxygen Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• for OE number: 31319385
• Length [mm]: 600
• Number of pins: 4
• Manufacturer: FAE ELEKTRYKA

• Fitting Position: before soot particulate filter
• Overall Length [mm]: 439
• Cable Length [mm]: 240
• Fitting Depth [mm]: 35
• Connector Shape: D Shape
• Connecting thread: M14x1.5-6h
• Number of pins: 2
• Operating temperature to [°C]: 1,000
• Manufacturer: ERA

• Construction Year to: 07.2018
• Fitting Position: before soot particulate filter
• Manufacturer: BOSCH

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• for OE number: 31338682
• Length [mm]: 400
• Number of pins: 4
• Manufacturer: FAE ELEKTRYKA

• Construction Year to: 07.2018
• Fitting Position: after soot particulate filter
• Manufacturer: BOSCH

• Fitting Position: Catalytic Converter, Upper
• Vehicle Identification Number (VIN) from: 285852, 94634
• Block Separation:
• for type code: Cross Country
• Cable Length [mm]: 370
• Thread Size: M14 x 1,5
• Number of pins: 2
• Manufacturer: METZGER

• Fitting Position: before soot particulate filter
• Vehicle Identification Number (VIN) to: 285851
• Manufacturer: METZGER

• for OE number: 31430000, 22204-75040
• Quality: OE
• Operating Mode: Electric
• Number of pins: 4
• Gross Weight [g]: 70
• Manufacturer: DENSO

• for OE number: 31338682, 31319386
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 395
• Number of pins: 4
• Weight [g]: 91
• Gross Weight [g]: 124
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Broadband oxygen sensor, Thread pre-greased

• for OE number: 31319385, 31370197 / 31370666
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 515
• Number of pins: 4
• Weight [g]: 97
• Gross Weight [g]: 130
• Name: DN DOX-0535
• Manufacturer: DENSO

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Broadband oxygen sensor, Thread pre-greased

• Number of pins: 3
• Number of connectors: 3
• Manufacturer: ERA

• Engine Code: D 4204 T14
• Model Year from: 2015
• Model Year to: 2018
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Oxygen Sensor: Diagnostic Probe
• Cable Length [mm]: 280
• Number of pins: 4
• for OE number: 31319386
• Manufacturer: MEAT&DORIA

Exhaust System: before turbocharger