• Fitting Position: Front Axle, outer
• Weight [kg]: 0.322
• Width [mm]: 42
• max. length [mm]: 100
• Height [mm]: 67
• Material: Steel
• Thread Size 1: M12x1,25
• Thread Size 2: M14x1,5
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
HYUNDAI LANTRA 93-96
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
HYUNDAI LANTRA 93-96
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 79
• Internal Thread [mm]: M12x1,25
• External Thread [mm]: M10x1,25
• Supplementary Article/Info 2: with crown nut
• Manufacturer: MERTZ

• Fitting Position: Front Axle Left, Front Axle Right
• Width [mm]: 44
• Length [mm]: 99
• Height [mm]: 69
• Thread Size: M12x1,25
• Cone Size [mm]: 13
• Supplementary Article/Info 2: with crown nut
• Manufacturer: MERTZ

• Installatsiooni pool: Esisild
• Pikkus (mm): 78
• koonusemõõt (mm): 14
• Manufacturer: KAMOKA
• Additional information: 9010286 KAMOKA
• Lisainfo: 9010286 KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right, outer
• Keermemõõt: 12x1,25
• Pöördeliik: koos paremkeermega
• Netokaal [kg]: 0,35
• Manufacturer: NK

Name: Liigend - Roolimine VOLVO S40/V70/ MITSUBISHI/ HYUNDAI LE/PR

• Installatsiooni pool: esisild vasakul, esisild paremal
• Lisainfo: Tie Rod End
• Additional information: Tie Rod End

• Fitting Position: Front Axle, both sides
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right
• External Thread [mm]: M12x1,25, M16x1,5
• Length [mm]: 302
• for OE number: 3345797
• Manufacturer: MERTZ

Lisainfo: Tie Rod End

• Fitting Position: Front Axle, both sides
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Length from [mm]: 78
• Thread Size: FM12X1,25R
• Thread Size 1: MM10x1,25R
• Cone Size [mm]: 13.4
• Quality class: PJ
• Name: Tie rod end left=right

• Installatsiooni pool: esisild vasakul, esisild paremal
• Pöördeliik: koos paremkeermega
• Sisekeere (mm): M12x1,25
• Keermemõõt 2: M12x1,25
• Name: Liigend - Roolimine VOLVO S40/V40 96- LE/PR
• Manufacturer: MAX

• Fitting Position: Front Axle, both sides
• Axle Joint Thread Type: with right-hand thread
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: OYODO

• Fitting Position: Front Axle
• Weight [kg]: 0.291
• Width [mm]: 43
• max. length [mm]: 100
• Height [mm]: 70
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: M14x1,5
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MITS.OUTLANDER 07-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MITS.OUTLANDER 07-
(kvaliteediklass: PJ)"

• Installatsiooni pool: esisild vasakul, esisild paremal
• Pikkus (mm): 65
• koonusemõõt (mm): 13,4
• Keermemõõt 1: M12X1,25
• Keermemõõt 2: M12X1,25
• Manufacturer: GSP ZAWIESZENIE

• Vehicle Identification Number (VIN) to: 599999
• Fitting Position: Front Axle both sides
• Required quantity: 2
• paaris tootenumbrid: VKDY 316048
• Pikkus (mm): 79
• Keermemõõt: M12 x 1,25
• Piirangutega toode/piirangu info: sünteetilise määrdega
• Keermemõõt 1: M10 x 1,25
• Name: SK VKDY316048
• Manufacturer: SKF

• Fitting Position: Front Axle
• Thread Size: MM16X1,5R
• Thread Size 1: MM12X1,25R
• Axle Joint Length [mm]: 305
• Name: Axial joint left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left
• Pikkus (mm): 79
• koonusemõõt (mm): 13,4
• Keermemõõt 1: M10X1,25
• Keermemõõt 2: M12X1,25
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle
• Weight [kg]: 0.32
• Width [mm]: 37
• max. length [mm]: 97
• Height [mm]: 68
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: m12x1,25
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
HYUNDAI ATOS/LANTRA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
HYUNDAI ATOS/LANTRA
(kvaliteediklass: PJ)"

• Pikkus (mm): 79
• Sisekeermemõõde: M12 x 1,25
• Väliskeerme mõõde: M10 x 1,25
• Võtmekaugus: 14
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,331
• Piirangutega toode/piirangu info 2: koos kroonmutriga
• Manufacturer: BLP

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Liigend - Roolimine VOLVO S40/V70/ MITSUBISHI/ HYUNDAI LE/PR

• Installatsiooni pool: esisild vasakul, esisild paremal
• Pöördeliik: koos paremkeermega
• Sisekeere (mm): M12x1,25
• Keermemõõt 2: M12x1,25
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Name: COC 49400838
• Manufacturer: CORTECO

• Fitting Position: Front Axle
• Cone Size [mm]: 13.5
• Length [mm]: 79
• Thread Size: M10 x 1,25, M12 x 1,25
• Name: ALT 79345AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle
• Weight [kg]: 0.305
• Width [mm]: 46
• max. length [mm]: 101
• Height [mm]: 71
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: M12x1,25
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MITS. COLT/LANCER
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MITS. COLT/LANCER
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• OE-numbri jaoks: MB244901
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle
• Weight [kg]: 0.321
• Width [mm]: 43
• max. length [mm]: 102
• Height [mm]: 70
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: M12x1,25
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VOLVO S40/V40
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VOLVO S40/V40
(kvaliteediklass: PJ)"

• Pikkus (mm): 79
• Sisekeermemõõde: M12 x 1,25
• Väliskeerme mõõde: M10 x 1,25
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,331
• Piirangutega toode/piirangu info 2: koos kroonmutriga
• Hooldusinfot jälgida:
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Liigend - Roolimine VOLVO S40/V70/ MITSUBISHI/ HYUNDAI LE/PR

• Installatsiooni pool: Esisild
• Pikkus (mm): 78
• koonusemõõt (mm): 15
• Kuju: otse
• Pikkus 2 [mm]: 17,5
• Keermemõõt 1: M12X1.25
• Keermemõõt 2: M10X1.25
• Kaal (kg): 0,36
• Manufacturer: KYB

• Fitting Position: Front Axle Left, Front Axle Right, outer
• Braking/Drive Dynamics: for vehicles with ABS
• Thread Size: FM12X1.25 RHT
• Cone Size [mm]: 13.3
• Length [mm]: 76
• paired article number: 230164
• Weight [kg]: 0.321
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Left, Front Axle Right
• Keermemõõt 1: M12x1,25
• Pikkus (mm): 310
• Netokaal [kg]: 0,62
• Name: Liigend - Roolimine VOLVO S40/V40 95- LE/PR
• Manufacturer: NK

• Pikkus (mm): 79
• Sisekeermemõõde: M12 x 1,25
• Väliskeerme mõõde: M10 x 1,25
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,331
• Piirangutega toode/piirangu info 2: koos kroonmutriga
• Name: SW 55 71 0012
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M12x1.25
• Pöördeliik: koos paremkeermega
• koonusemõõt (mm): 13,4
• Installatsiooni pool: Esisild
• Pikkus (mm): 99
• Laius (mm): 44
• Kõrgus (mm): 69
• Name: DE TA1536
• Manufacturer: DELPHI

• Fitting Position: Front Axle both sides
• Cone Size [mm]: 13.4
• Length [mm]: 67
• Thread Size: M10 x 1,25, M12 x 1,25
• Name: ALT 79668AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, both sides
• Axle Joint Thread Type: with right-hand thread
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: OYODO

• Fitting Position: Front Axle Right, Front Axle Left
• Base body material: Steel
• Length [mm]: 305
• Net weight [kg]: 0.571
• Thread Size 1: M16x1,5
• Thread Size 2: M12x1,25
• Name: OMG G11.4941
• Manufacturer: OMG

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: SDK-MS-017
• Manufacturer: NTY

• Fitting Position: Front Axle
• koonusemõõt (mm): 13,3
• Keermemõõt: M12x1,25
• SVHC: SVHS aineid ei esine
• Name: Rooliots
• Manufacturer: FAG

• Pikkus (mm): 302
• Väliskeerme mõõde: M16 x 1,5, M12 x 1,25
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,523
• Piirangutega toode/piirangu info 2: koos distantsseibiga
• Manufacturer: BLUE PRINT

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: QUARO

Name: Liigend - Roolimine VOLVO S40/V70/ MITSUBISHI/ HYUNDAI LE/PR

• Fitting Position: Front Axle
• Weight [g]: 361
• Length [mm]: 74
• Thread Size: M12XP1.25
• Internal Thread [mm]: M12XP1.25
• Supplementary Article/Info 2: with nut
• Manufacturer: CTR

• Fitting Position: Front Axle
• Weight [kg]: 0.55
• Width [mm]: 36
• Material: Steel
• Height [mm]: 36
• max. length [mm]: 327
• Thread Size 1: M12x1,25
• Thread Size 2: M16x1,5
• Name: Axial joint left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MITSUBISHI CARISMA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MITSUBISHI CARISMA
(kvaliteediklass: PJ)"

• Installatsiooni pool: Esisild
• Name: Liigend - Roolimine VOLVO S40/V40 95- (ZE WSPOM.)
• Manufacturer: MAX

• Installatsiooni pool: Esisild
• Õõtshoovad: õõtshoob
• Manufacturer: MAGNETI MARELLI

• Keermemõõt 1: M16 x 1,5
• Keermemõõt 2: M12x1.25
• Installatsiooni pool: esisild vasakul, esisild paremal
• Pikkus (mm): 323
• Laius (mm): 37
• Kõrgus (mm): 37
• Rooliotsa pikkus (mm): 302
• Manufacturer: DELPHI
• Name: DE TA1800

• Fitting Position: Front Axle Left, Front Axle Right
• Braking/Drive Dynamics: for vehicles with ABS
• Axle Joint Length [mm]: 309
• Thread Size 1: MM12X1.25 RHT
• Thread Size 2: MM16X1.5 RHT
• paired article number: 240327
• Weight [kg]: 0.55
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Pöördeliik: koos paremkeermega
• Sisekeere (mm): M12x1,25
• Keermemõõt 2: M12x1,25
• Manufacturer: LMI

Name: Liigend - Roolimine VOLVO S40/V70/ MITSUBISHI/ HYUNDAI LE/PR

• Fitting Position: Front Axle both sides
• Internal Thread 1 [mm]: M12x1,25
• External Thread 2 [mm]: M10x1,25
• Length [mm]: 80
• Weight [kg]: 0.36
• Manufacturer: RTS

• Production date from: 1996
• Installatsiooni pool: Esisild
• Kaal (kg): 0,34
• Keermemõõt: M12X1.25
• pakendi pikkus [cm]: 10,3
• pakendi laius [cm]: 7
• pakendi kõrgus [cm]: 4,5
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Rooliotsa pikkus (mm): 300
• Keermetüüp rooliots: koos paremkeermega
• Keermemõõt: M12x1,25
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG
• Name: LU 840025610

• Production date from: 1996
• Installatsiooni pool: Esisild
• Kaal (kg): 0,58
• pakendi pikkus [cm]: 34,5
• pakendi laius [cm]: 4
• pakendi kõrgus [cm]: 4
• Manufacturer: FEBEST

• Installatsiooni pool: esisild vasakul, esisild paremal
• Pikkus (mm): 78
• Keermemõõt 1: M10x1,25
• Keermemõõt 2: M12x1,25
• Pöördeliik: koos paremkeermega
• soovitatav vahetada paarikaupa:
• vajaminev tükihulk: 2
• Manufacturer: MEY

Name: Liigend - Roolimine VOLVO S40/V70/ MITSUBISHI/ HYUNDAI LE/PR

• Vehicle Identification Number (VIN) from: 600000
• Fitting Position: Front Axle Right
• paaris tootenumbrid: VKDY 316049
• Manufacturer: SKF
• Name: SK VKDY316050

• Installatsiooni pool: esisild vasakul, esisild paremal
• Pikkus (mm): 304
• Keermemõõt 1: M16x1,5
• Keermemõõt 2: M12x1,25
• soovitatav vahetada paarikaupa:
• vajaminev tükihulk: 2
• Name: Liigend - Roolimine VOLVO S40/V40 95- LE/PR
• Manufacturer: MEY

• Pikkus (mm): 302
• Väliskeerme mõõde: M12 x 1,25, M16 x 1,5
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,523
• Piirangutega toode/piirangu info 2: koos distantsseibiga
• Name: Liigend - Roolimine VOLVO S40/V40 95- LE/PR
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 600000
• Fitting Position: Front Axle Left
• paaris tootenumbrid: VKDY 316050
• Manufacturer: SKF
• Name: SK VKDY316049

• Vehicle Identification Number (VIN) from: 600000
• Fitting Position: Front Axle both sides
• Required quantity: 2
• paaris tootenumbrid: VKDY 326036
• Pikkus (mm): 340
• Keermemõõt: M16 x 1,5
• Piirangutega toode/piirangu info: sünteetilise määrdega
• Keermemõõt 1: M14 x 1,5
• Manufacturer: SKF
• Name: SK VKDY326036

• Vehicle Identification Number (VIN) to: 599999
• Fitting Position: Front Axle both sides
• Required quantity: 2
• paaris tootenumbrid: VKDY 326035
• Name: SK VKDY326035
• Manufacturer: SKF

• Fitting Position: Front Axle both sides
• External Thread 1 [mm]: M16x1,5
• External Thread 2 [mm]: M12x1,25
• Length [mm]: 305
• Weight [kg]: 0.542
• Manufacturer: RTS

• Installatsiooni pool: esisild vasakul, esisild paremal
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: LEMFORDER

• Fitting Position: Front Axle, both sides
• Axle Joint Thread Type: with right-hand thread
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: PROFIPOWER

• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: TRW

• Fitting Position: Front Axle
• Installatsiooni pool: Esisild
• Pikkus (mm): 305
• Kaal (kg): 0,6
• vajaminev tükihulk: 2
• Keermemõõt: M12x1,25/M16x1,5
• Keermetüüp rooliots: koos paremkeermega
• pakendi pikkus [cm]: 43,5
• pakendi laius [cm]: 7,5
• pakendi kõrgus [cm]: 4
• Manufacturer: MONROE