• Fitting Position: Front Axle, outer
• Weight [kg]: 0.322
• Width [mm]: 42
• max. length [mm]: 100
• Height [mm]: 67
• Material: Steel
• Thread Size 1: M12x1,25
• Thread Size 2: M14x1,5
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
HYUNDAI LANTRA 93-96
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
HYUNDAI LANTRA 93-96
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 79
• Internal Thread [mm]: M12x1,25
• External Thread [mm]: M10x1,25
• Supplementary Article/Info 2: with crown nut
• Manufacturer: MERTZ

• Fitting Position: Front Axle Left, Front Axle Right
• Width [mm]: 44
• Length [mm]: 99
• Height [mm]: 69
• Thread Size: M12x1,25
• Cone Size [mm]: 13
• Supplementary Article/Info 2: with crown nut
• Manufacturer: MERTZ

• Fitting Position: Front Axle
• Length [mm]: 78
• Cone Size [mm]: 14
• Manufacturer: KAMOKA
• Additional information: 9010286 KAMOKA
• Lisainfo: 9010286 KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Name: Liigend - Roolimine VOLVO S40/V40 96- LE/PR
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Tie Rod End
• Additional information: Tie Rod End

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Lisainfo: Tie Rod End

• Fitting Position: Front Axle, both sides
• Axle Joint Thread Type: with right-hand thread
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: OYODO

• Fitting Position: Front Axle
• Weight [kg]: 0.291
• Width [mm]: 43
• max. length [mm]: 100
• Height [mm]: 70
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: M14x1,5
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MITS.OUTLANDER 07-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MITS.OUTLANDER 07-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Length from [mm]: 78
• Thread Size: FM12X1,25R
• Thread Size 1: MM10x1,25R
• Cone Size [mm]: 13.4
• Quality class: PJ
• Name: Tie rod end left=right

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 65
• Cone Size [mm]: 13.4
• Thread Size 1: M12X1,25
• Thread Size 2: M12X1,25
• Manufacturer: GSP ZAWIESZENIE

• Vehicle Identification Number (VIN) to: 599999
• Fitting Position: Front Axle both sides
• Required quantity: 2
• paired article number: VKDY 316048
• Length [mm]: 79
• Thread Size: M12 x 1,25
• Supplementary Article/Supplementary Info: with synthetic grease
• Thread Size 1: M10 x 1,25
• Name: SK VKDY316048
• Manufacturer: SKF

• Fitting Position: Front Axle Left
• Length [mm]: 79
• Cone Size [mm]: 13.4
• Thread Size 1: M10X1,25
• Thread Size 2: M12X1,25
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle
• Weight [kg]: 0.32
• Width [mm]: 37
• max. length [mm]: 97
• Height [mm]: 68
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: m12x1,25
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
HYUNDAI ATOS/LANTRA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
HYUNDAI ATOS/LANTRA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Length [mm]: 79
• Internal Thread Size: M12 x 1,25
• External Thread Size: M10 x 1,25
• Spanner Size: 14
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.331
• Supplementary Article/Info 2: with crown nut
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Liigend - Roolimine VOLVO S40/V70/ MITSUBISHI/ HYUNDAI LE/PR

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Name: COC 49400838
• Manufacturer: CORTECO

• Fitting Position: Front Axle
• Cone Size [mm]: 13.5
• Length [mm]: 79
• Thread Size: M10 x 1,25, M12 x 1,25
• Name: ALT 79345AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle
• Weight [kg]: 0.305
• Width [mm]: 46
• max. length [mm]: 101
• Height [mm]: 71
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: M12x1,25
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MITS. COLT/LANCER
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MITS. COLT/LANCER
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: QUARO

Name: Liigend - Roolimine VOLVO S40/V70/ MITSUBISHI/ HYUNDAI LE/PR

• Length [mm]: 79
• Internal Thread Size: M12 x 1,25
• External Thread Size: M10 x 1,25
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.331
• Supplementary Article/Info 2: with crown nut
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Liigend - Roolimine VOLVO S40/V70/ MITSUBISHI/ HYUNDAI LE/PR

• Fitting Position: Front Axle
• Weight [kg]: 0.321
• Width [mm]: 43
• max. length [mm]: 102
• Height [mm]: 70
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: M12x1,25
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VOLVO S40/V40
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VOLVO S40/V40
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right, outer
• Braking/Drive Dynamics: for vehicles with ABS
• Thread Size: FM12X1.25 RHT
• Cone Size [mm]: 13.3
• Length [mm]: 76
• paired article number: 230164
• Weight [kg]: 0.321
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 80
• Thread Size 1: M12x1.25
• Thread Size 2: M10x1.25
• Weight [kg]: 0.31
• Name: DY 22-07192
• Manufacturer: DYS

• Fitting Position: Front Axle
• Length [mm]: 78
• Cone Size [mm]: 15
• Shape: straight
• Length 2 [mm]: 17.5
• Thread Size 1: M12X1.25
• Thread Size 2: M10X1.25
• Weight [kg]: 0.36
• Height [mm]: 66.5
• Material: Steel
• Manufacturer: KYB

• Thread Size: M12x1.25
• Thread Type: with right-hand thread
• Cone Size [mm]: 13.4
• Fitting Position: Front Axle
• Length [mm]: 99
• Width [mm]: 44
• Height [mm]: 69
• Manufacturer: DELPHI

• Fitting Position: Front Axle both sides
• Cone Size [mm]: 13.4
• Length [mm]: 67
• Thread Size: M10 x 1,25, M12 x 1,25
• Name: ALT 79668AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Left
• Base body material: Steel
• Net weight [kg]: 0.37
• Length [mm]: 70
• Thread Size 1: RHT M14x7,5
• Thread Size 2: M10x1,5
• paired article number: G10.2976
• Name: OMG G10.2977
• Manufacturer: OMG

• Fitting Position: Front Axle Right
• Base body material: Steel
• Net weight [kg]: 0.398
• Length [mm]: 70
• Thread Size 1: RHT M14x7,5
• Thread Size 2: M10x1,5
• paired article number: G10.2977
• Name: OMG G10.2976
• Manufacturer: OMG

• Fitting Position: Front Axle
• Cone Size [mm]: 13.3
• Thread Size: M12x1,25
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 840063110

• Fitting Position: Front Axle both sides
• Internal Thread 1 [mm]: M12x1,25
• External Thread 2 [mm]: M10x1,25
• Length [mm]: 80
• Weight [kg]: 0.36
• Manufacturer: RTS

• Fitting Position: Front Axle
• Rod/Strut: Camber Link
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 78
• Thread Size 1: M10x1,25
• Thread Size 2: M12x1,25
• Thread Type: with right-hand thread
• replacement in pairs recommended:
• Required quantity: 2
• Manufacturer: MEY

Name: Liigend - Roolimine VOLVO S40/V70/ MITSUBISHI/ HYUNDAI LE/PR

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Liigend - Roolimine VOLVO S40/V70/ MITSUBISHI/ HYUNDAI LE/PR

• Fitting Position: Front Axle Right, Front Axle Left
• Thread Size: M10x1,25
• Thread Size 1: M12x1,25
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Production date from: 1996
• Fitting Position: Front Axle
• Weight [kg]: 0.34
• Thread Size: M12X1.25
• Packaging length [cm]: 10.3
• Packaging width [cm]: 7
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left
• Weight [kg]: 0.596
• Width [mm]: 51
• max. length [mm]: 193
• Height [mm]: 73
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: M16x1,5
• paired article number: HY-331
• Name: Tie rod end left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
HYUNDAI TUCSON
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
HYUNDAI TUCSON
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) from: 600000
• Fitting Position: Front Axle Right
• paired article number: VKDY 316049
• Manufacturer: SKF
• Name: SK VKDY316050

• Vehicle Identification Number (VIN) from: 600000
• Fitting Position: Front Axle Left
• paired article number: VKDY 316050
• Manufacturer: SKF
• Name: SK VKDY316049

• Fitting Position: Front Axle, outer
• Weight [kg]: 0.4
• Required quantity: 2
• Internal Thread [mm]: 12x1,25
• Thread Type: with right-hand thread
• Packaging length [cm]: 14.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5
• Manufacturer: MONROE

• Fitting Position: Front Axle, both sides
• Axle Joint Thread Type: with right-hand thread
• Thread Type: with right-hand thread
• Internal Thread [mm]: M12x1,25
• Thread Size 2: M12x1,25
• Manufacturer: PROFIPOWER