• Diameter [mm]: 20
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: white
• Manufacturer: FAE

• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: B 4184 S
• Manufacturer: FACET

• Engine Code: B 4184 S
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV101

• Number of pins: 3
• Pressure from [kPA]: 15
• Pressure to [kPA]: 100
• for OE number: 6238927
• Manufacturer: MEAT & DORIA

• Number of pins: 3
• Connector Shape: oval
• Quality: OE EQUIVALENT
• for OE number: 7745679

• Engine Code: B 4184 S3
• Supplementary Article/Supplementary Info: without gasket/seal
• Transmission Type: Manual Transmission
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: MAX

• Engine Code: B 4184 S
• Number of connectors: 3
• Manufacturer: JPN

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 2
• for OE number: 19201H
• Manufacturer: MEAT & DORIA

Manufacturer: MAGNETI MARELLI

• Engine Code: B 4184 S
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Colour: black
• Alternatively:
• Number of pins: 3
• Weight [kg]: 0.064
• Alternative Repair Kit: 550140
• Manufacturer: ERA

• Engine Code: B 4184 S
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Country Specific Design: Canada, USA
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Measuring Range from [kPa]: 15
• Measuring Range to [kPa]: 100
• Measuring Range from [V]: 0.21
• Measuring Range to [V]: 4.75
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: B 4184 S
• Housing Colour: black
• Thread Size: M10x1
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: B 4184 S
• Housing Colour: black
• Thread Size: M10x1
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Oxygen Sensor: Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• not for country specific design: Canada, USA
• Length [mm]: 1,038
• Fabrication Number: ESL-VV-000
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Length [mm]: 400
• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-MS-005
• Manufacturer: NTY

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Engine Code: B 4184 S, B 4184 S3
• Construction Year to: 07.1999
• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Fabrication Number: EPP-VV-003
• Manufacturer: NTY
• Lisainfo: VOLVO S40 I, V40 1.6/1.8/2.0 95-04 (5PIN)
• Additional information: VOLVO S40 I, V40 1.6/1.8/2.0 95-04 (5PIN)

• Number of pins: 3
• Manufacturer Restriction: AM-VERSION
• Manufacturer: METZGER

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: JAPKO

• Sensor Type: Piezoelectric Sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MEY

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Engine Code: B 4184 S
• Number of pins: 3
• Pressure from [kPA]: 20
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV904
• Manufacturer: ESEN SKV

• Engine Code: B 4184 S, B 4184 S3
• Construction Year to: 07.1999
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: ENERGY

• Engine Code: B 4184 S
• Supplementary Article/Info 2: for lead-free fuel
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• not for country specific design: Canada, USA
• Fitting Position: before catalytic converter
• Cable Length [mm]: 1,060
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Engine Code: B4184S3
• Number of pins: 5
• Suction pipe connector diameter [mm]: 70
• Quality class: PJ
• Name: Air flow sensor

• Number of pins: 3
• Pressure from [kPA]: 15
• Pressure to [kPA]: 100
• Manufacturer: FAE

• Construction Year from: 03.1996
• Engine Code: B4184S3
• Number of connectors: 5
• Housing Type: with housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Pressure [Pa] from: 20,000
• Pressure [Pa] to: 100,000
• Voltage [V]: 5
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009400221
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 470
• Oxygen Sensor: Planar probe, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Number of circuits: 4
• Resistor [Ohm]: 6
• Length [mm]: 1,060
• Conductor Number: 4
• Cable Length [mm]: 1,060
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: B 4184 S
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: EPS

• Number of pins: 5
• Connector Shape: D Shape
• Supplementary Article/Info 2: with integrated air temperature sensor
• Housing Type: with housing
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,060
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.17
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV561
• Manufacturer: ESEN SKV

• Engine Code: B 4184 S
• Operating Mode: pneumatic
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: PIE

• Engine Code: B 4184 S, B 4184 S3
• Construction Year to: 07.1999
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: B 4184 S
• Construction Year from: 01.1996
• Oxygen Sensor: Regulating Probe
• Length [mm]: 1,040
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Engine Code: B 4184 S
• Manufacturer Restriction: DELPHI
• Pressure from [kPA]: 15
• Pressure to [kPA]: 102
• Output Voltage, from [V]: 0.261
• Output Voltage, up to [V]: 4.958
• Manufacturer: FACET

• Engine Code: B 4184 S
• Manufacturer Restriction: DELPHI
• Pressure from [kPA]: 15
• Pressure to [kPA]: 102
• Output Voltage, from [V]: 0.261
• Output Voltage, up to [V]: 4.958
• Name: EP 1.993.001
• Manufacturer: EPS

• Engine Code: B 4184 S
• Line insulation design: with silicone-coated woven-fibre insulation
• Supplementary Article/Info 2: without plug
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Fitting Position: after catalytic converter
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe, Heated
• Construction Year from: 08.1997
• Length [mm]: 400
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Construction Year from: 03.1996
• Construction Year to: 04.1999
• Engine Code: B 4184 S
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 03.1996
• Engine Code: B4184S3
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.19
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year from: 03.1996
• Engine Code: B 4184 S3
• Number of pins: 5
• for OE number: 30611533
• Manufacturer: MEAT&DORIA

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Number of mounting bores: 2
• Number of pins: 3
• Connector Shape: rectangular
• Socket colour: white
• Length [mm]: 670
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 10
• for OE number: 9143648
• Manufacturer: MEAT&DORIA

• Engine Code: B 4184 S3
• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10502-12B1

• Engine Code: B4184S3
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Engine Code: B 4184 S
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B 4184 S3, B 4184 S
• Number of pins: 5
• Colour: black
• Manufacturer: VDO