• Fitting Position: Rear Axle, Front Axle
• Brake System: TRW
• Manufacturer: JP GROUP A/S

• Fitting Position: Front Axle
• Brake System: LUCAS/TRW
• Weight [kg]: 0.03
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Brake System: TRW
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake System: TRW
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Brake System: ATE
• Quantity per packing unit: 6
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0039
• Quality class: PJ

Additional information: "Tootja: DELPHI
740 (744), 04.83-08.
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
740 (744), 04.83-08.
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Brake System: TRW
• Quantity per packing unit: 4
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
ACCORD VII AERODECK
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
ACCORD VII AERODECK
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Rear Axle
• Brake System: TRW, Lucas
• Manufacturer: FRENKIT

• Fitting Position: Rear Axle
• Construction Year from: 01.1998
• Manufacturer Restriction: TRW
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake System: TRW
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: METZGER

• Construction Year to: 04.2004
• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: BOSCH

• Construction Year to: 04.2004
• Fitting Position: Front Axle, Rear Axle
• Brake System: TRW
• Block Separation:
• Manufacturer: BOSCH

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-VV-001
• Manufacturer: NTY

• Fitting Position: Rear Axle Right
• Fabrication Number: HTO-MS-007
• paired article number: HTO-MS-006
• Manufacturer: NTY
• Name: NTY HTO-MS-007

• Fitting Position: Rear Axle Left
• Fabrication Number: HTO-MS-006
• paired article number: HTO-MS-007
• Manufacturer: NTY

• Construction Year from: 01.1998
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 920
• Socket colour: black

• Construction Year to: 12.1997
• Fitting Position: Front Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 940
• Socket colour: black

• Construction Year to: 12.1997
• Fitting Position: Front Axle Left
• Sensor Type: Passive sensor
• Length [mm]: 920
• Socket colour: black

• Fitting Position: Front Axle Left
• Fabrication Number: HTO-MS-000
• paired article number: HTO-MS-001
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• Fabrication Number: HTO-MS-001
• paired article number: HTO-MS-000
• Manufacturer: NTY

• Vehicle Identification Number (VIN) to: 985261
• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 890
• Socket colour: black
• Manufacturer: JP GROUP

• Fitting Position: Front Axle, Left
• Diameter 1/Diameter 2 [mm]: 320/92
• Manufacturer: YSPARTS

• Vehicle Identification Number (VIN) from: 985262
• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 750
• Socket colour: black

• Fitting Position: Front Axle Left
• Inner Diameter [mm]: 92
• Outer Diameter [mm]: 320
• paired article number: 131-07-168
• Surface: Painted
• Colour: black
• Material: Sheet Steel
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Right
• Inner Diameter [mm]: 92
• Outer Diameter [mm]: 320
• paired article number: 131-07-167
• Surface: Painted
• Colour: black
• Material: Sheet Steel
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 08.1999
• Construction Year to: 04.2004
• Sensor Type: Passive sensor
• Fitting Position: Front Axle
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle Right
• Name: Plekk,piduriketas
• Manufacturer: MAX

• Fitting Position: Front Axle Left
• Name: Plekk,piduriketas
• Manufacturer: MAX

• Fitting Position: Right, Front Axle
• Diameter 1 [mm]: 320
• Diameter 2 [mm]: 92
• Material: Sheet Steel
• Name: CFD 612501
• Manufacturer: DACO

• Fitting Position: Front Axle Right
• Guarantee: 3 years guarantee
• paired article number: 57SKV117
• Weight [kg]: 0.34
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV118

• Fitting Position: Front Axle Left
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• paired article number: BSP-8910R
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle Right
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• paired article number: BSP-8910L
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle Left
• Guarantee: 3 years guarantee
• paired article number: 57SKV118
• Weight [kg]: 0.32
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV117

• Fitting Position: Front Axle Left
• Diameter 1 [mm]: 320
• Diameter 2 [mm]: 92
• Material: Sheet Steel
• paired article number: 11248
• Weight [kg]: 0.38
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Diameter 1 [mm]: 320
• Diameter 2 [mm]: 92
• Material: Sheet Steel
• paired article number: 11247
• Weight [kg]: 0.38
• Manufacturer: A.B.S.

• Construction Year from: 08.1999
• Vehicle Identification Number (VIN) to: 985261
• Fitting Position: Rear Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 885
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-VV-000

• Construction Year from: 01.1998
• Construction Year to: 04.2004
• Fitting Position: Front Axle
• Length [mm]: 885
• Number of pins: 2
• Plug Type: Male
• Connector Shape: rectangular
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV188

• Fitting Position: Front Axle Left
• Material: Steel
• paired article number: 8125 27104
• Surface: cataphoretically primed
• Diameter 1/Diameter 2 [mm]: 320/92
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Fitting Position: Front Axle Right
• Material: Steel
• paired article number: 8125 27103
• Surface: cataphoretically primed
• Diameter 1/Diameter 2 [mm]: 320/92
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Fitting Position: Front Axle
• Construction Year from: 01.1998
• Overall Length [mm]: 960
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 880
• paired article number: 30459
• Weight [kg]: 0.16
• Manufacturer: A.B.S.

• Vehicle Identification Number (VIN) from: 130000
• Sensor Type: Passive sensor
• Cable Length [mm]: 890
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: 985261
• Overall Length [mm]: 875
• Length [mm]: 20
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 825
• paired article number: 30470
• Weight [kg]: 0.19
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Left
• paired article number: 19-4386
• Name: Plekk,piduriketas
• Manufacturer: MAX

• Fitting Position: Rear Axle Right
• paired article number: 19-4387
• Name: Plekk,piduriketas
• Manufacturer: MAX

• Construction Year from: 08.1999
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 878
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Rear Axle Left
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 287
• paired article number: 131-07-680
• Colour: silver
• Material: Sheet Steel
• Article number of recommended accessories: 231-04-045
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Right
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 287
• paired article number: 131-07-679
• Colour: silver
• Material: Sheet Steel
• Article number of recommended accessories: 231-04-045
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated, Cathodic Painting, Painted
• paired article number: 71430
• Diameter 1/Diameter 2 [mm]: 320 / 92
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated, Cathodic Painting, Painted
• paired article number: 71431
• Diameter 1/Diameter 2 [mm]: 320 / 92
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Right
• paired article number: FT00159
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Fitting Position: Rear Axle Left
• paired article number: FT00160
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Fitting Position: Front Axle Left
• Construction Year to: 08.1997
• Vehicle Identification Number (VIN) to: 129999
• Cable Length [mm]: 930
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Manufacturer: FAE

• Model Year from: 1998
• for brake disc diameter [mm]: 281
• for brake disc thickness [mm]: 24
• Fitting Position: Front Axle Left
• Outer Diameter [mm]: 320
• paired article number: 6115238
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Model Year from: 1998
• for brake disc diameter [mm]: 281
• for brake disc thickness [mm]: 24
• Fitting Position: Front Axle Right
• Outer Diameter [mm]: 320
• paired article number: 6115237
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Fitting Position: Rear Axle Right
• Material: Steel
• paired article number: 8125 27203
• Diameter 1/Diameter 2 [mm]: 287/70
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Fitting Position: Rear Axle Left
• Material: Steel
• paired article number: 8125 27204
• Surface: cataphoretically primed
• Diameter 1/Diameter 2 [mm]: 287/70
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Vehicle Identification Number (VIN) to: 985261
• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Front Axle Left
• Construction Year to: 12.1997
• Overall Length [mm]: 980
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 880
• paired article number: 30477
• Weight [kg]: 0.15
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Construction Year to: 12.1997
• Overall Length [mm]: 980
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 880
• paired article number: 30484
• Weight [kg]: 0.17
• Manufacturer: A.B.S.

• Vehicle Identification Number (VIN) to: 985261
• Sensor Type: Inductive Sensor
• Cable Length [mm]: 855
• Number of pins: 2
• Fitting Position: Rear Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Front Axle
• Required quantity: 2
• Cable Length [mm]: 920
• Fitting Depth [mm]: 27.7
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated, Painted
• paired article number: 71355
• Diameter 1/Diameter 2 [mm]: 92 / 320
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated, Painted
• paired article number: 71356
• Diameter 1/Diameter 2 [mm]: 92 / 320
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Construction Year from: 08.1999
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 925
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Rear Axle
• Construction Year from: 08.1999
• Vehicle Identification Number (VIN) to: 985261
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 885
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20127

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 940
• Number of pins: 2
• Fitting Depth [mm]: 28
• Manufacturer: ERA

• Vehicle Identification Number (VIN) from: 985262
• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated
• paired article number: 58829
• Diameter 1/Diameter 2 [mm]: 70 / 288
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle, Front Axle Left
• Construction Year to: 08.1997
• Vehicle Identification Number (VIN) to: 129999
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 942
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated
• Diameter 1/Diameter 2 [mm]: 70 / 288
• paired article number: 58830
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) to: 985261
• Cable Length [mm]: 875
• Fitting Depth [mm]: 19.9
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Name: Brake dust shield left
• Quality class: PJ

Lisainfo: VOLVO S40 / V40, 96- (kvaliteediklass PJ)

• Fitting Position: Front Axle, Right
• Diameter 1 [mm]: 321
• Diameter 2 [mm]: 91.4
• Surface: Zinc-coated, Stoved Enamel
• paired article number: J3325000
• SVHC: No SVHC present!
• Name: Plekk,piduriketas
• Manufacturer: HBJ

• Fitting Position: Front Axle, Left
• Diameter 1 [mm]: 321
• Diameter 2 [mm]: 91.6
• Surface: Zinc-coated, Stoved Enamel
• paired article number: J3335000
• SVHC: No SVHC present!
• Name: Plekk,piduriketas
• Manufacturer: HBJ

• Construction Year from: 08.1999
• Construction Year to: 04.2004
• Fitting Position: Front Axle
• Manufacturer Restriction: AM-Version
• Manufacturer: METZGER

• Fitting Position: Front Axle, Front Axle Right
• Construction Year to: 08.1997
• Vehicle Identification Number (VIN) to: 129999
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 938
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Rear Axle Left
• paired article number: 6115310
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Fitting Position: Rear Axle Right
• paired article number: 6115309
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Fitting Position: Rear Axle Left
• Diameter 1 [mm]: 287
• Diameter 2 [mm]: 70
• Material: Sheet Steel
• paired article number: 11192
• Weight [kg]: 0.31
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Right
• Diameter 1 [mm]: 287
• Diameter 2 [mm]: 70
• Material: Sheet Steel
• paired article number: 11191
• Weight [kg]: 0.31
• Manufacturer: A.B.S.

• Vehicle Identification Number (VIN): [;985261]
• Cable Length [mm]: 920
• Fitting Position: Rear Axle Right, Rear Axle Left
• Name: SN ASB165.11
• Manufacturer: NTN-SNR

• Name: Brake dust shield right
• Quality class: PJ

Lisainfo: VOLVO S40 / V40, 96- (kvaliteediklass PJ)

• Fitting Position: Rear Axle, Right
• Diameter 1 [mm]: 286
• Diameter 2 [mm]: 70
• Surface: Zinc-coated, Stoved Enamel
• paired article number: J3345000
• SVHC: No SVHC present!
• Name: Plekk,piduriketas
• Manufacturer: HBJ

• Fitting Position: Rear Axle, Left
• Diameter 1 [mm]: 286
• Diameter 2 [mm]: 70
• Surface: Zinc-coated, Stoved Enamel
• paired article number: J3355000
• SVHC: No SVHC present!
• Name: Plekk,piduriketas
• Manufacturer: HBJ