Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Length [mm]: 59.5
- Outer Diameter [mm]: 20
-
External Thread Size: M10 x 1,
5 - Thread Length [mm]: 28.5
- Quality/ Grade: 8.8
- Spanner Size: 13
- Shaft Length [mm]: 21
- Colour: grey
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.042
-
Name: KINNITUSPOLDID,
OOTSHOOB - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Production date from: 2000
- Fitting Position: Rear Axle
- Weight [kg]: 0.333
- Control/Trailing Arm Type: Control Arm
- Rod/Strut: Coupling Rod
- Packaging length [cm]: 10
- Packaging width [cm]: 4.6
- Packaging height [cm]: 3.6
- Manufacturer: FEBEST
-
Additional information: FST2725-
XC90 -
Lisainfo: FST2725-
XC90
- Fitting Position: Rear Axle
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 280
- Manufacturer: MAGNETI MARELLI
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 46
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 32
- Supplementary Article/Supplementary Info: with accessories
- reinforced version:
- Replace in pairs only:
- with environmental seal: Carbon Neutral
- Required quantity: 2
-
Name: Kinnitus -
Kndmik VOLVO P. 850 - Manufacturer: MEY
General Information: Better than OE: MEYLE-HD bushings with optimized inner sleeve profile withstand greater forces and provide a longer life and performance.
-
Fitting Position: Front Axle,
Lower, both sides - Control/Trailing Arm Type: Control Arm
- Outer Diameter [mm]: 32
- Inner Diameter [mm]: 12
- Thickness [mm]: 46
- Manufacturer: LEMFÖRDER
- Production date from: 2000
- Fitting Position: Rear Axle
- Weight [kg]: 0.838
- Control/Trailing Arm Type: Control Arm
- Packaging length [cm]: 56.4
- Packaging width [cm]: 5.1
- Packaging height [cm]: 3.9
- Manufacturer: FEBEST
-
Additional information: FST2725-
V70R -
Lisainfo: FST2725-
V70R
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Lower -
paired article number: ZWD-
VV- 014 -
Fabrication Number: ZWD-
VV- 015 - Manufacturer: NTY
-
Fitting Position: Front Axle,
Lower, Right - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Material: Steel
-
paired article number: 72-
0974 -
Name: Roolimine -
Kndmik VOLVO P. 850/ S70/ V70 PR - Manufacturer: MAX
-
Lisainfo: MGZ-
110002 -
Additional information: MGZ-
110002
-
Fitting Position: Front Axle,
Lower, Left - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Material: Steel
-
paired article number: 72-
0976 -
Name: Roolimine -
Kndmik VOLVO P. 850/ S70/ V70 LE - Manufacturer: MAX
Lisainfo: Track Control Arm
-
Fitting Position: Front Axle,
Lower, Right - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Material: Steel
-
paired article number: 72-
0979 -
Name: Roolimine -
Kndmik VOLVO P. C70/ S70/ V70 - Manufacturer: MAX
-
Lisainfo: MGZ-
110004 -
Additional information: MGZ-
110004
-
Fitting Position: Front Axle Right,
Lower - Control/Trailing Arm Type: Control Arm
-
Fabrication Number: ZWD-
VV- 009 -
paired article number: ZWD-
VV- 008 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle Left,
Lower - Control/Trailing Arm Type: Control Arm
-
Fabrication Number: ZWD-
VV- 008 -
paired article number: ZWD-
VV- 009 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Roolimisliik: Õõtshoob
- Hulgaühik: Komplekt
-
Installatsiooni pool: all,
esisild vasakul - koonusemõõt (mm): 19
- Materjal: Metall
- Õõtshoovad: Tõmbevarras
- Name: Control arm left
- Quality class: PJ
Lisainfo: "Tootja: SRL
VOLVO S70/V70 '97-
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VOLVO S70/V70 '97-
(kvaliteediklass: PJ)"
- Roolimisliik: Õõtshoob
- Hulgaühik: Komplekt
-
Installatsiooni pool: all,
esisild paremal - koonusemõõt (mm): 19
- Materjal: Metall
- Õõtshoovad: Tõmbevarras
- Name: Control arm right
- Quality class: PJ
Lisainfo: "Tootja: SRL
VOLVO S70/V70 '97-
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VOLVO S70/V70 '97-
(kvaliteediklass: PJ)"
- Quality class: PJ
Lisainfo: "Tootja: SRL
VOLVO S/V 70 97-
(kvaliteediklass: PJ)"
- Quality class: PJ
Lisainfo: "Tootja: SRL
VOLVO S/V 70 97-
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Right,
Lower -
for model code: V70,
V70 XC - Trim Level: 1 BOLT BUSHING
- Block Separation:
- Production date to: 2000
- paired article number: 5014809
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Net weight [kg]: 3.14
-
Name: Roolimine -
Kndmik VOLVO P. 850/ S70/ V70 PR - Manufacturer: NK
-
Fitting Position: Front Axle Left,
Lower -
for model code: V70,
V70 XC - Trim Level: 1 BOLT BUSHING
- Block Separation:
- Production date to: 2000
- paired article number: 5014810
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Net weight [kg]: 3.14
-
Name: Roolimine -
Kndmik VOLVO P. 850/ S70/ V70 LE - Manufacturer: NK
-
Fitting Position: Front Axle Right,
Lower - paired article number: S060775
- Cone Size [mm]: 19
- Control/Trailing Arm Type: Control Arm
- Manufacturer: GSP
- Construction Year from: 01.1997
- Construction Year to: 05.2000
-
Fitting Position: Front Axle,
Left, outer, Lower - Weight [kg]: 3.5
- Control/Trailing Arm Type: Control Arm
- paired article number: L27507
- Packaging length [cm]: 37
- Packaging width [cm]: 33
- Packaging height [cm]: 8
- Manufacturer: MONROE
-
Fitting Position: Front Axle Left,
Lower - paired article number: S060776
- Cone Size [mm]: 19
- Control/Trailing Arm Type: Control Arm
- Manufacturer: GSP ZAWIESZENIE
- Roolimisliik: Õõtshoob
- põhikeha materjal: Malm
- Installatsiooni pool: esisild paremal
- Netokaal [kg]: 3
- Läbimõõt [mm]: 19
-
paaris tootenumbrid: G40.4131/
C - Läbimõõt 1 (mm): 19
-
Piirangutega toode/piirangu info 2: koos kande-
/ juhtliigendiga -
Name: OMG G40.4130/
C - Manufacturer: OMG
- Fitting Position: Lower Front Axle
- Control/Trailing Arm Type: Control Arm
- Guarantee: 3 years guarantee
- Weight [kg]: 3.8
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV ESEN
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- for OE number: 272273
- Cone Size [mm]: 19
- Material: Cast Steel
-
Supplementary Article/Info 2: with bearing,
with ball joint, with bolts/ screws - Manufacturer: MERTZ
- Name: Control arm left
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VOLVO S/V 70 97-
(kvaliteediklass: PJ)"
- Name: Control arm right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VOLVO S/V 70 97-
(kvaliteediklass: PJ)"
- Installatsiooni pool: esisild paremal
- Roolimisliik: Õõtshoob
- Materjal: Hallmalm
-
paaris tootenumbrid: 20-
20072- 2 -
Kaal (kg): 3,
17 -
Name: DY 20-
20072- 1 - Manufacturer: DYS
- Installatsiooni pool: esisild vasakul
- Roolimisliik: Õõtshoob
- Materjal: Hallmalm
-
paaris tootenumbrid: 20-
20072- 1 -
Kaal (kg): 3,
17 -
Name: DY 20-
20072- 2 - Manufacturer: DYS
- Fitting Position: Lower Front Axle
- Control/Trailing Arm Type: Control Arm
- Guarantee: 3 years guarantee
- Weight [kg]: 3.8
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 04SKV024
- Fitting Position: Front Axle Right
- Control/Trailing Arm Design: Triangular Control Arm
- paired article number: VKDS 326088 B
- Length [mm]: 335
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Supplementary Info: with synthetic grease
- Supplementary Article/Info 2: with ball joint
- Manufacturer: SKF
- Name: SK VKDS326090B
- Fitting Position: Front Axle Left
- paired article number: VKDS 326090 B
- Length [mm]: 335
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Supplementary Info: with synthetic grease
- Supplementary Article/Info 2: with ball joint
- Manufacturer: SKF
- Name: SK VKDS326088B
- Fitting Position: Front Axle Right
- Control/Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Article/Info 2: with ball joint
- paired article number: 821 0448 10
- SVHC: No SVHC present!
-
Name: Ootshoob,
kndmik - Manufacturer: FAG
- Fitting Position: Front Axle Left
- Control/Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Article/Info 2: with ball joint
- paired article number: 821 0449 10
- SVHC: No SVHC present!
-
Name: Ootshoob,
kndmik - Manufacturer: FAG
-
Fitting Position: Front Axle Left,
outer, Left, Lower - Block Separation:
- Model Year to: 2000
- Material: Sheet Steel
- paired article number: TC877
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Length [mm]: 300
- Width [mm]: 68
- Manufacturer: DELPHI
- Name: DE TC876
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Lower,
Front Axle Right -
Article number of the recommended special tool: V99-
1020 -
paired article number: V95-
0026 - Axle alignment required after fitting:
- Weight [kg]: 2.8
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
Lower, Left, Lower Front Axle - Construction Year from: 01.1997
- Construction Year to: 05.2000
- Control/Trailing Arm Type: Control Arm
-
Article number of the recommended special tool: V99-
1020 -
paired article number: V95-
0028 - Axle alignment required after fitting:
- Weight [kg]: 3.257
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 11.1999
-
Fitting Position: Front Axle,
Lower, Right, Lower Front Axle - Control/Trailing Arm Type: Control Arm
- Axle alignment required after fitting:
-
paired article number: V95-
0029 -
Article number of the recommended special tool: V99-
1020 - Weight [kg]: 3.257
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Right,
outer, Right, Lower - Block Separation:
- Model Year to: 2000
- Material: Sheet Steel
- paired article number: TC876
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Length [mm]: 300
- Width [mm]: 68
- Name: DE TC877
- Manufacturer: DELPHI
-
Fitting Position: Front Axle,
Lower, Right - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Material: Steel
- paired article number: JTC917
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
for model code: V70,
V70 XC -
Fitting Position: outer,
Front Axle Right, Lower - Trim Level: 2 BOLTS BUSHING
- Block Separation:
- Production date to: 2000
- paired article number: 8500 27508
- Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: with ball joint,
with rubber mount - Required quantity: 1
-
Name: Ootshoob,
kndmik - Manufacturer: TRI
-
Lisainfo: VOLVO S70,
V70, 850 SERIE -
Additional information: VOLVO S70,
V70, 850 SERIE
-
for model code: V70,
V70 XC -
Fitting Position: outer,
Front Axle Left, Lower - Trim Level: 2 BOLTS BUSHING
- Block Separation:
- Production date to: 2000
- paired article number: 8500 27507
- Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: with ball joint,
with rubber mount - Required quantity: 1
-
Name: Ootshoob,
kndmik - Manufacturer: TRI
-
Lisainfo: VOLVO S70,
V70, 850 SERIE -
Additional information: VOLVO S70,
V70, 850 SERIE
-
Fitting Position: Front Axle,
Lower, Left - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Material: Steel
- paired article number: JTC1064
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
Lower, Left - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Material: Steel
- paired article number: JTC916
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Right,
Lower - Control/Trailing Arm Type: Control Arm
- Material: Steel
- Replace in pairs only:
- reinforced version:
- Required quantity: 1
-
paired article number: 516 050 0101/
HD - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany. Name: WAHACZ VOLVO P. 850 (06/91-10/97), C/S/V 70 (12/95-10/05) PR HD
-
Fitting Position: Front Axle Left,
Lower - Control/Trailing Arm Type: Control Arm
- Material: Steel
- Replace in pairs only:
- reinforced version:
- Required quantity: 1
-
paired article number: 516 050 0100/
HD - Manufacturer: MEY
General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution. Name: WAHACZ VOLVO P. 850 (06/91-10/97), C/S/V 70 (12/95-10/05) LE HD BEZ RUB
-
Fitting Position: Front Axle,
Lower, Right - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Material: Steel
- paired article number: JTC1065
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Roolimisliik: Õõtshoob
- põhikeha materjal: Malm
- Installatsiooni pool: esisild vasakul
-
Netokaal [kg]: 3,
38 - Läbimõõt [mm]: 19
-
paaris tootenumbrid: G40.4132/
C - Läbimõõt 1 (mm): 19
-
Piirangutega toode/piirangu info 2: koos kande-
/ juhtliigendiga -
Name: OMG G40.4133/
C - Manufacturer: OMG
- Roolimisliik: Õõtshoob
- põhikeha materjal: Malm
- Installatsiooni pool: esisild paremal
- Netokaal [kg]: 3 382
- Läbimõõt [mm]: 19
-
paaris tootenumbrid: G40.4133/
C - Läbimõõt 1 (mm): 19
-
Piirangutega toode/piirangu info 2: koos kande-
/ juhtliigendiga -
Name: OMG G40.4132/
C - Manufacturer: OMG
- Fitting Position: Front Axle Right
- Control/Trailing Arm Design: Triangular Control Arm
- paired article number: VKDS 326085 B
- Length [mm]: 375
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Supplementary Info: with synthetic grease
- Supplementary Article/Info 2: with ball joint
- Manufacturer: SKF
- Name: SK VKDS326084B
- Fitting Position: Front Axle Left
- Control/Trailing Arm Design: Triangular Control Arm
- paired article number: VKDS 326084 B
- Length [mm]: 375
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Supplementary Info: with synthetic grease
- Supplementary Article/Info 2: with ball joint
- Manufacturer: SKF
- Name: SK VKDS326085B
- Fitting Position: Front Axle Right
- Alternatively:
- Control/Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Article/Info 2: with ball joint
- paired article number: 821 0450 10
- SVHC: No SVHC present!
- Manufacturer: FAG
- Fitting Position: Front Axle Left
- Alternatively:
- Control/Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Article/Info 2: with ball joint
- paired article number: 821 0451 10
- SVHC: No SVHC present!
-
Name: Ootshoob,
kndmik - Manufacturer: FAG
-
Fitting Position: Front Axle Left,
outer, Left, Lower - Block Separation:
- Model Year to: 2000
- Material: Cast Steel
- paired article number: TC979
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Length [mm]: 370
- Width [mm]: 335
- Height [mm]: 65
- Name: DE TC978
- Manufacturer: DELPHI
-
Fitting Position: Front Axle Right,
outer, Right, Lower - Block Separation:
- Model Year to: 2000
- Material: Cast Steel
- paired article number: TC978
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Length [mm]: 370
- Width [mm]: 335
- Height [mm]: 65
- Name: DE TC979
- Manufacturer: DELPHI
- Fitting Position: Front Axle Left
- Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: with bolts/
screws - paired article number: 49399597
- Name: COC 49399598
- Manufacturer: CORTECO
- Fitting Position: Front Axle Right
- Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: with bolts/
screws - paired article number: 49399598
- Manufacturer: CORTECO ZAWIESZENIE
-
Fastening Type: Four-
point attachment -
Fitting Position: Lower,
Front Axle Left - Control/Trailing Arm Type: Control Arm
- Material: Steel
- Length [mm]: 284
- Supplementary Article/Supplementary Info: with accessories
- replacement in pairs recommended:
- Required quantity: 1
- paired article number: 516 050 7004
-
Name: Roolimine -
Kndmik VOLVO P. C70/ S70/ V70 LE KPL. - Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Installatsiooni pool: esisild paremal
- Roolimisliik: Õõtshoob
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Front Axle Right,
outer, Lower - for model code: V70
- Cone Size [mm]: 19
- Supplementary Article/Info 2: with ball joint
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: 210588
- Weight [kg]: 3.88
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
-
Fitting Position: Front Axle Left,
outer, Lower - for model code: V70
- Cone Size [mm]: 19
- Supplementary Article/Info 2: with ball joint
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: 210589
- Weight [kg]: 3.88
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
-
Fitting Position: Front Axle Left,
Left, Lower - Model Year from: 2001
- Material: Aluminium
- paired article number: TC2541
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: without ball joint
- Length [mm]: 350
- Width [mm]: 330
- Height [mm]: 70
- Manufacturer: DELPHI
-
Fitting Position: Front Axle Right,
Right, Lower - Model Year from: 2001
- Material: Aluminium
- paired article number: TC2540
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: without ball joint
- Length [mm]: 350
- Width [mm]: 330
- Height [mm]: 70
- Manufacturer: DELPHI ZAWIESZENIE
-
Fitting Position: Front Axle,
Lower, Left - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Material: Steel
- paired article number: 24604 02
-
Name: Roolimine -
Kndmik VOLVO P. 850/ S70/ V70 LE - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
Lower, Right - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Material: Steel
- paired article number: 24605 02
-
Name: Roolimine -
Kndmik VOLVO P. 850/ S70/ V70 PR - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!