• Thread Size: M 10x1
• Housing Colour: black
• Pressure [bar]: 0.4
• Manufacturer: FAE

• Engine Code: B 230 F
• Number of pins: 2
• Manufacturer: KAVO PARTS

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET
• Additional information: OS3561 VERNET
• Lisainfo: OS3561 VERNET

• Thread Size: M12x1.5
• Spanner Size: 19
• Manufacturer: FAST

• Engine Code: B 230 F
• Pressure [bar]: 0.5
• Thread Size: M14x1,5
• Spanner Size: 24
• Manufacturer: FACET

• Engine Code: B 230 F
• Pressure [bar]: 0.5
• Thread Size: M14x1,5
• Spanner Size: 24
• Name: EP 1.800.056
• Manufacturer: EPS

• Thread Size: M14x1,5 mm
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 1
• Pressure [bar]: 0.5
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Switch point from [bar]: 0.4
• Switch point to [bar]: 0.6
• External Thread Size: M14 x 1,5
• Spanner Size: 24
• Number of connectors: 1
• Colour: brown
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: B 230 F
• Colour: blue
• Number of pins: 2
• Height [mm]: 51.8
• Weight [kg]: 0.029
• Supplementary Article/Info 2: with seal ring
• Thread Size: M12x1,5
• Housing Colour: blue
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Switch point from [bar]: 0.4
• Switch point to [bar]: 0.6
• External Thread Size: M14 x 1,5
• Spanner Size: 24
• Number of connectors: 1
• Colour: brown
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Name: SW 55 91 5076
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 808999
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Engine Code: B 230 F
• Thread Size: M14 x 1,5
• Switch Pressure [bar]: 0.5
• Spanner Size: 24
• Number of pins: 1
• Weight [kg]: 0.05
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI

• Engine Code: B 230 F
• Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 7.8113, 7.8114, 7.8149, 7.8151
• Manufacturer: FACET

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195051110100
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Engine Code: B 230 F
• Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: EP 1.830.128
• Manufacturer: EPS

• Construction Year to: 06.1993
• Thread Size: M12x1.5
• Manufacturer: VERNET

• Engine Code: B 230 F
• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 302
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: blue
• Manufacturer Restriction: Bosch
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B 230 F
• Colour: black
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 7.8149, 7.8151
• Manufacturer: FACET

• Engine Code: B 230 F
• Colour: black
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.149, 1.880.151
• Name: EP 1.830.192
• Manufacturer: EPS

• Construction Year from: 08.1988
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• for OE number: 594621
• Manufacturer: MEAT&DORIA

• Vehicle Identification Number (VIN) from: 809000
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: B 230 F
• Number of pins: 2
• Colour Coding: black
• Weight [kg]: 0.016
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B 230 F
• Manufacturer: FACET

• Construction Year from: 08.1988
• Manufacturer: BOSCH

• Engine Code: B 230 F
• Name: EP 1.957.010
• Manufacturer: EPS

• Engine Code: B 230 F
• Number of pins: 2
• Weight [kg]: 0.05
• Manufacturer: ERA

• Number of pins: 2
• Thread Size: M12x1,5
• Colour: black
• Weight [kg]: 0.032
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Thread Size: M12x1,5
• Housing Colour: black
• Colour: black
• Manufacturer: METZGER

Manufacturer: MAGNETI MARELLI

• Vehicle Identification Number (VIN) from: 334100, 809000
• Resistor [Ohm]: 170
• Cable Length [mm]: 500
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 23.7
• Weight [kg]: 0.095
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Resistor [Ohm]: 180
• Cable Length [mm]: 485
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Engine Code: B 230 F
• Length [mm]: 520
• Manufacturer: FACET

• Engine Code: B 230 F
• Length [mm]: 520
• Name: EP 1.953.397
• Manufacturer: EPS

• Oxygen Sensor: Regulating Probe
• Number of circuits: 3
• Manufacturer: KAMOKA

• Number of pins: 3
• Connector Shape: rectangular
• Manufacturer: FAE

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Technical Information Number: Universal
• Overall Length [mm]: 315
• Number of pins: 3
• Oxygen Sensor: Regulating Probe
• Manufacturer: JAPKO

• Technical Information Number: Universal
• Overall Length [mm]: 315
• Number of pins: 3
• Oxygen Sensor: Regulating Probe
• Manufacturer: ASHIKA

• Engine Code: B 230 F
• Name: EP 1.995.079
• Manufacturer: EPS

• Construction Year from: 08.1988
• Manufacturer: BOSCH

• Construction Year from: 08.1988
• Number of pins: 3
• Fitting Depth [mm]: 24
• Cable Length [mm]: 440
• Manufacturer: METZGER

• Cable Length [mm]: 530
• Number of pins: 3
• Manufacturer: DELPHI

• Construction Year from: 08.1988
• Oxygen Sensor: Regulating Probe, Finger probe, Heated
• Vehicle Identification Number (VIN) to: 334099, 808999
• Block Separation:
• Body Type: Estate
• Cable Length [mm]: 1,215
• Manufacturer: DELPHI
• Name: DE ES10242-12B1

• Vehicle Identification Number (VIN) from: 809000
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"

• Length [mm]: 1,215
• Number of circuits: 3
• Conductor Number: 3
• Resistor [Ohm]: 4.5
• Cable Length [mm]: 1,215
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM078

• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 985
• Guarantee: 3 years guarantee
• Number of circuits: 3
• Weight [kg]: 0.18
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV545
• Manufacturer: ESEN SKV

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 1,250
• Number of circuits: 3
• Manufacturer: ERA

• Construction Year from: 08.1992
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,670
• Guarantee: 3 years guarantee
• Number of circuits: 3
• Weight [kg]: 0.23
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of circuits: 3
• Overall Length [mm]: 1,236
• Oxygen Sensor: Heated
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Construction Year from: 08.1988
• for OE number: 8251497
• Quality class: PJ
• Name: Air flow sensor

• Construction Year from: 08.1992
• Oxygen Sensor: Regulating Probe, Finger probe, Heated
• Vehicle Identification Number (VIN) to: 334099/808999
• Engine Code: B230FD
• Cable Length [mm]: 985
• Manufacturer: DELPHI

• Oxygen Sensor: Regulating Probe
• Number of pins: 3
• Cable Length [mm]: 1,550
• for OE number: 35017530
• Manufacturer: MEAT&DORIA

• Engine Code: B 230 F
• Vehicle Identification Number (VIN) to: 808999
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 6
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.52
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 07.1987
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Vehicle Identification Number (VIN) from: 334100/809000
• Engine Code: B 230 F
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 1,700
• Thread Size: M18x1,5
• Cable Length [mm]: 1,530
• Conductor Number: 3
• Weight [kg]: 0.211
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 07.1987
• Oxygen Sensor: Regulating Probe, Finger probe, Heated
• Vehicle Identification Number (VIN) from: 334100/809000
• Engine Code: B 230 F
• Cable Length [mm]: 1,670
• Manufacturer: DELPHI
• Name: DE ES10957-12B1

• Engine Code: B 230 F
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 6
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.51
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.23
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV400

• Construction Year from: 08.1988
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• for OE number: 1346962
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Construction Year from: 08.1988
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• for OE number: 1346962
• Number of circuits: 3
• Overall Length [mm]: 1,236
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 100,000
• Manufacturer: BOSCH
• Name: BS 0258003957

• Catalytic Converter Type: for vehicles with catalytic converter
• Weight [kg]: 0.086
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 08.1988
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• for OE number: 3501753
• Number of circuits: 3
• Overall Length [mm]: 1,700
• Available as universal article as well, see article no.: 0258986504
• Recommended change interval [km]: 100,000
• Manufacturer: BOSCH

• Construction Year from: 08.1988
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• for OE number: 3501753
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Construction Year from: 08.1988
• for OE number: 08 26 285
• Weight [kg]: 0.093
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 08.1988
• for OE number: 1367382
• Manufacturer: BOSCH

• Construction Year from: 08.1988
• Body Type: Estate
• Vehicle Identification Number (VIN) from: 809000
• New Part:
• Used part return not required:
• Recommended additional repairs: Air Filter
• Weight [kg]: 0.447
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B 230 F
• Vehicle Identification Number (VIN) from: 809000
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Construction Year from: 08.1988
• for OE number: 8251497
• Exchange Part:
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring