• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET
• Additional information: OS3561 VERNET
• Lisainfo: OS3561 VERNET

• Engine Code: B 200 F
• Pressure [bar]: 0.5
• Thread Size: M14x1,5
• Spanner Size: 24
• Manufacturer: FACET

• Engine Code: B 200 F
• Pressure [bar]: 0.5
• Thread Size: M14x1,5
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Keermemõõt: M14x1,5 mm
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 1
• Surve (bar): 0,5
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Switch point from [bar]: 0.4
• Switch point to [bar]: 0.6
• External Thread Size: M14 x 1,5
• Spanner Size: 24
• Number of connectors: 1
• Colour: brown
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M 14x1,5
• Manufacturer: FAE

• Switch point from [bar]: 0.4
• Switch point to [bar]: 0.6
• External Thread Size: M14 x 1,5
• Spanner Size: 24
• Number of connectors: 1
• Colour: brown
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Name: SW 55 91 5076
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: B 200 F
• Thread Size: M14 x 1,5
• Switch Pressure [bar]: 0.5
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195051110100
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• for OE number: 594621
• Manufacturer: MEAT&DORIA

• Keermemõõt: M12 x 1,5
• Võtmekaugus: 19
• Pistikkontaktide arv: 2
• Manufacturer: ERA

• Engine Code: B 200 F
• Manufacturer: FACET

Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

• Engine Code: B 200 F
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Pistikkontaktide arv: 2
• Kaal (kg): 0,05
• Manufacturer: ERA

• Number of pins: 2
• Thread Size: M12x1,5
• Colour: black
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: rectangular
• Cable Length [mm]: 530
• Sensor Type: Inductive Sensor
• for OE number: 3547847
• Manufacturer: MEAT&DORIA

Manufacturer: MAGNETI MARELLI

• Resistor [Ohm]: 170
• Cable Length [mm]: 500
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 23.7
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 57
• External Thread Size: M16 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Surface: Zinc-coated
• Weight [kg]: 0.05
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: B 200 F
• Takistus [oom]: 180
• Kaablipikkus (mm): 485
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24
• Manufacturer: ERA

• Thread Size: 5/8x18 UNF
• Manufacturer: VERNET

• Keermemõõt: 5/8'' x 18 UNF
• Manufacturer: ERA

• Oxygen Sensor: Regulating Probe
• Number of circuits: 3
• Manufacturer: KAMOKA

• Number of pins: 3
• Connector Shape: rectangular
• Manufacturer: FAE

• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with connector parts
• Cable Length [mm]: 530
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Technical Information Number: Universal
• Overall Length [mm]: 315
• Number of pins: 3
• Oxygen Sensor: Regulating Probe
• Manufacturer: ASHIKA

• Engine Code: B 200 F
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: EPS

• tehnilise informatsiooni number: Universal
• pikkus üle kõige (mm): 315
• Pistikkontaktide arv: 3
• Lambda andur: Sond
• Manufacturer: JAPKO

• Oxygen Sensor: Regulating Probe
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 670
• Ülekandeliinide arv: 3
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ENERGY

• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 24
• Kaablipikkus (mm): 440
• Manufacturer: METZGER

• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Catalytic Converter Type: for vehicles with catalytic converter
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"

• Lambda andur: Sond
• Pinge [V]: 12
• Pikkus (mm): 710
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 3
• Kaal (kg): 0,16
• Takistus [oom]: 4,5
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV547

• Oxygen Sensor: Regulating Probe
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 670
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 3
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV063
• Manufacturer: ESEN SKV

• Lambda andur: Sond
• Pinge [V]: 12
• Pikkus (mm): 1 670
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 3
• Kaal (kg): 0,23
• Takistus [oom]: 4,5
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Oxygen Sensor: Regulating Probe
• Engine Code: B 200 F
• Pinge [V]: 12
• Pikkus (mm): 1 665
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 3
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV033
• Manufacturer: ESEN SKV

• Quality class: PJ
• Name: Air flow sensor

• Oxygen Sensor: Regulating Probe
• Number of pins: 3
• Cable Length [mm]: 1,550
• for OE number: 35017530
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 1,700
• Thread Size: M18x1,5
• Cable Length [mm]: 1,530
• Conductor Number: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe, Finger probe, Heated
• Cable Length [mm]: 1,670
• Manufacturer: DELPHI
• Name: DE ES10957-12B1

• Engine Code: B 200 F
• Pinge [V]: 12
• Korpusetüüp: koos korpusega
• Pistikkontaktide arv: 6
• Garantii: 3 aastat garantii
• Uus osa:
• Vana detaili tagastus mittevajalik:
• Kaal (kg): 0,51
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Lambda andur: Bistabiilne andur
• Garantii: 3 aastat garantii
• Kaal (kg): 0,23
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV400

• Catalytic Converter Type: for vehicles with catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Overall Length [mm]: 1,700
• Available as universal article as well, see article no.: 0258986504
• Recommended change interval [km]: 100,000
• Manufacturer: BOSCH

• for OE number: 08 26 285
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• New Part:
• Used part return not required:
• Recommended additional repairs: Air Filter
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B 200 F
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Exchange Part:
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH