Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle,
Lower, Front -
Mounting Type: Rubber-
Metal Mount -
Lisainfo: VOLVO 700 /
900 SERIE -
Additional information: VOLVO 700 /
900 SERIE
-
Fitting Position: Lower Front Axle,
Lower - for OE number: 6819057
- Manufacturer: GSP ZAWIESZENIE
-
Fitting Position: Front Axle,
both sides - Height [mm]: 27
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 51
- Manufacturer: OPTIMAL ZAWIESZENIE
-
Fitting Position: Lower Front Axle,
Lower - Width [mm]: 55
- Height [mm]: 28
- Height 1 [mm]: 25
- Outer Diameter 1 [mm]: 32
- Inner Diameter 1 [mm]: 17.6
- Manufacturer: GSP
-
Fitting Position: Lower Front Axle,
Lower - for OE number: 1 273 235
- Manufacturer: GSP
- for OE number: 6819079
- long version:
- Length [m]: 388.5
- reinforced version:
- Quantity per packing unit: 5
- Control/Trailing Arm Type: for control arm
- Axle alignment required after fitting:
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.103
- Manufacturer: VAICO
Fitting Position: Lower Front Axle, outer, both sides, Lower, Front Axle General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right, Centre -
Mounting Type: Rubber-
Metal Mount - Height [mm]: 27
- Inner Diameter [mm]: 17
- Outer Diameter [mm]: 51
-
Guarantee: 3 years guarantee or up to 75,
000km - Manufacturer: METZGER
-
Fitting Position: Rear Axle,
Right - Axle alignment required after fitting:
- Weight [kg]: 0.112
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0.056
-
Fitting Position: Front Axle both sides,
Lower, outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 17
- Outer Diameter [mm]: 51.5
- Length [mm]: 24.9
- Manufacturer: RTS
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower - for OE number: 1329 655
- Manufacturer: GSP
- Thickness [mm]: 27
- Inner Diameter [mm]: 18
-
Outer Diameter [mm]: 52,
24 -
Material: Rubber/
Metal - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Centre - Weight [kg]: 0.053
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 17.5
- Outer Diameter [mm]: 52
- Width [mm]: 27
- SVHC: No SVHC present!
- Manufacturer: FAG
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 17
- Outer Diameter [mm]: 51
- Width [mm]: 27
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 829019010
-
Fitting Position: Front Axle Left,
Front Axle Right, outer, Lower - Inner Diameter [mm]: 17.8
- Outer Diameter [mm]: 52
- Length [mm]: 31.7
- paired article number: 270573
- Weight [kg]: 0.06
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
-
Fitting Position: Front Axle Right,
Front Axle Left, Lower, outer - Height [mm]: 27
- Inner Diameter [mm]: 17
- Outer Diameter [mm]: 51
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- for OE number: 6819079
- replacement in pairs recommended:
- Manufacturer: MEYLE
-
Fitting Position: Front Axle Right,
Front Axle Left, Lower, outer - Height [mm]: 27
- Inner Diameter [mm]: 17
- Outer Diameter [mm]: 51
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- for OE number: 3530789
- replacement in pairs recommended:
- Manufacturer: MEYLE
- Length [mm]: 67.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 47
-
Material: Rubber/
Metal - Control/Trailing Arm Type: for control arm
-
Fitting Position: inner,
Front Axle Left, Front Axle Right - Weight [kg]: 0.26
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 2
- Control/Trailing Arm Type: for control arm
- Axle alignment required after fitting:
- Thickness [mm]: 65
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 34,
37 -
Fitting Position: both sides,
Rear, Lower Front Axle -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.205
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
outer, Lower - Inner Diameter 1 [mm]: 18
- Outer Diameter 1 [mm]: 52
- Thickness 1 [mm]: 27
- Manufacturer: DELPHI
- Name: DE TD347W
- Fitting Position: Front Axle
- Required quantity: 2
-
Material: Rubber/
Metal - Weight [g]: 317
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 47
- Length [mm]: 68
- Name: IM 1831
- Manufacturer: ORIGINAL IMPERIUM
- Thickness [mm]: 65
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 34,
46 -
Fitting Position: Front Axle,
both sides - Weight [kg]: 0.242
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 67
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 47
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Name: Tension rod bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
VOLVO 740/760/940/60
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VOLVO 740/760/940/60
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
Lower, both sides - Rod/Strut: Pressure Rod
- Quantity per axle: 2
- Manufacturer: LEMFORDER
SVHC: No information available, please contact the manufacturer!
- Inner Diameter [mm]: 14.2
- Outer Diameter [mm]: 47
- Length [mm]: 67.5
- paired article number: 270572
- Weight [kg]: 0.27
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: in front of axle, Front Axle Right, Front Axle Left, Lower
- Thickness [mm]: 50
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 59
-
Material: Rubber/
Metal - Control/Trailing Arm Type: for trailing arm
- Fitting Position: Rear Axle Lower
- Shape: slotted
- Weight [kg]: 0.13
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 50
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 59
-
Material: Rubber/
Metal - Control/Trailing Arm Type: for trailing arm
- Fitting Position: Rear Axle Lower
- Shape: slotted
- Weight [kg]: 0.13
- Name: SW 55 92 2941
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Lower -
Material: Rubber/
Metal - Weight [g]: 146
- Name: IM 1567
- Manufacturer: ORIGINAL IMPERIUM
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks