• Vehicle Identification Number (VIN) from: 254963
• Vehicle Identification Number (VIN) to: 297034
• for OE number: 8627600
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 800
• Number of pins: 4
• Weight [g]: 108
• Gross Weight [g]: 141
• Manufacturer: DENSO
• Name: DN DOX-0411

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
V70 II KOMBI (P80/),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
V70 II KOMBI (P80/),
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) from: 392246
• for OE number: 30650090
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 650
• Number of pins: 4
• Weight [g]: 118
• Gross Weight [g]: 151
• Manufacturer: DENSO
• Name: DN DOX-0404

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
S80 (TS, XY), 05.98-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
S80 (TS, XY), 05.98-
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) from: 297035
• Exhaust System: for pre-catalytic converter
• for OE number: 8658237
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 470
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 133
• Manufacturer: DENSO
• Name: DN DOX-0412

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased Additional information: "Tootja: DENSO
S80 (TS, XY), 05.98-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
S80 (TS, XY), 05.98-
(kvaliteediklass: Q)"

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Manufacturer: NTY

• Lambda andur: Diagnoosisond
• Seerianumber: ESL-VV-003
• Kaablipikkus (mm): 360
• Manufacturer: NTY

• Lambda andur: Bistabiilne andur, Keere eelmääritud
• Seerianumber: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Construction Year to: 07.2001
• Oxygen Sensor: Diagnostic Probe, Oxygen Sensor
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda andur: Diagnoosisond
• Kaablipikkus (mm): 900
• Manufacturer: NTY

• Lambda andur: Bistabiilne andur
• Garantii: 3 aastat garantii
• Kaal (kg): 0,15
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV118
• Manufacturer: ESEN SKV

• Lambda andur: Bistabiilne andur
• Garantii: 3 aastat garantii
• Kaal (kg): 0,12
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Resistor [Ohm]: 6
• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 810
• Cable Length [mm]: 810
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 13
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV913

• Construction Year to: 07.2001
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Manufacturer: ENERGY

• Construction Year from: 08.2001
• Construction Year to: 07.2002
• Oxygen Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year from: 09.2001
• Construction Year to: 02.2006
• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 875
• Number of connectors: 4
• Manufacturer: VERNET
• Additional information: LS140560 VERNET
• Lisainfo: LS140560 VERNET

• Vehicle Identification Number (VIN) from: 254963
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0109
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Piirangutega toode/piirangu info 2: ilma pistikuta
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570111
• Manufacturer: ERA

• Vehicle Identification Number (VIN) to: 254962
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: DN DOX-0113
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)"

• Construction Year to: 07.2001
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: B 5244 S2
• Model Year from: 2002
• Model Year to: 2004
• Fitting Position: after catalytic converter
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Construction Year from: 08.2001
• Construction Year to: 07.2002
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Model Year from: 2002
• Model Year to: 2004
• Cable Length [mm]: 884
• Name: DE ES20377-12B1
• Manufacturer: DELPHI

• Engine Code: B 5244 S2
• Model Year from: 2002
• Model Year to: 2004
• Fitting Position: after catalytic converter
• Oxygen Sensor: Diagnostic Probe
• Kaablipikkus (mm): 250
• Ühendushulk: 4
• Lambda andur: soojendatud, Titaanandur, Keere eelmääritud
• Ülekandeliinide arv: 4
• Name: EP 1.998.235
• Manufacturer: EPS

• Oxygen Sensor: Regulating Probe, Oxygen Sensor, Heated
• Fitting Position: before catalytic converter
• Model Year from: 2001
• Model Year to: 2002
• Cable Length [mm]: 620
• Manufacturer: DELPHI ELEKTRONIKA

• Fitting Position: after catalytic converter
• Cable Length [mm]: 484
• Oxygen Sensor: Planar probe, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Lisainfo: ES20364-12B1
• Additional information: ES20364-12B1

• Engine Code: B 5244 S2
• Fitting Position: Rear
• Model Year to: 2001
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 830
• Thread Size: M18x1,5
• Cable Length [mm]: 710
• Conductor Number: 4
• Weight [kg]: 0.157
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 297035
• Vehicle Identification Number (VIN) to: 392245
• for OE number: 30622252
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 650
• Number of pins: 4
• Weight [g]: 118
• Gross Weight [g]: 151
• Manufacturer: DENSO
• Quality class: Q
• Name: Lambda sensor

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
S80 (TS, XY), 05.98-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
S80 (TS, XY), 05.98-
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) to: 254962
• for OE number: 9497468, 8627202
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 800
• Number of pins: 4
• Weight [g]: 125
• Gross Weight [g]: 158
• Manufacturer: DENSO
• Name: DN DOX-1420
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
S70 (P80/), 11.96-11
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
S70 (P80/), 11.96-11
(kvaliteediklass: Q)"

• Construction Year from: 09.2002
• Construction Year to: 02.2006
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Emission Standard: Euro 4 (D4)
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18x1,5
• Cable Length [mm]: 360
• Conductor Number: 4
• Connector Shape: angular
• Length [mm]: 360
• Number of pins: 4
• Weight [kg]: 0.1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• for OE number: 8658237
• Vehicle Identification Number (VIN) from: 297035
• Length [mm]: 500
• Number of pins: 4
• Manufacturer: FAE ELEKTRYKA

• Construction Year to: 09.2001
• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 810
• Manufacturer: PIERBURG

• Construction Year from: 09.2002
• Emission Standard: Euro 4 (D4)
• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 475
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Engine Code: B 5244 S2
• Vehicle Identification Number (VIN) from: 254963
• Fitting Position: Rear
• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 875
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Construction Year to: 09.2001
• Emission Standard: EC 2005
• Fitting Position: before catalytic converter
• Oxygen Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: rectangular
• Manufacturer: VALEO

• Vehicle Identification Number (VIN) from: 297035
• for OE number: 8658237
• Oxygen Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 460
• Weight [kg]: 0.092
• Name: SW 33 10 3141
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 02.2006
• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 520
• Quality: OE EQUIVALENT
• for OE number: LR014010
• Manufacturer: MEAT&DORIA

• Vehicle Identification Number (VIN) from: 98623
• Vehicle Identification Number (VIN) to: 297034
• Exhaust System: for pre-catalytic converter
• for OE number: 9497252
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 620
• Number of pins: 4
• Weight [g]: 115
• Gross Weight [g]: 148
• Manufacturer: DENSO
• Name: DN DOX-1419
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Broadband oxygen sensor, Thread pre-greased Additional information: "Tootja: DENSO
S70 (P80/), 11.96-11
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
S70 (P80/), 11.96-11
(kvaliteediklass: Q)"

• Construction Year to: 02.2006
• Fitting Position: Exhaust Manifold
• Oxygen Sensor: Diagnostic Probe
• Number of pins: 4
• Cable Length [mm]: 520
• Quality: OE EQUIVALENT
• for OE number: MHK501140
• Name: Lambda andur
• Manufacturer: MD