• Fitting Position: Rear Axle
• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU358217051

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle
• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU358217041

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle
• Quantity: 2
• Vehicle Identification Number (VIN) to: 134375
• Block Separation:
• Vehicle Identification Number (VIN) from: 134376
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI ELEKTRONIKA

• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without cable
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: DE SS21321-12B1
• Manufacturer: DELPHI

• Engine Code: B 420 T
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: B 420 T
• Spanner Size: 19
• Name: EP 1.830.401
• Manufacturer: EPS

• Engine Code: B 420 T
• Thread Size: M12x1,5
• Spanner Size: 16
• Manufacturer: FACET

• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Fitting Position: Front Axle Right, Front Axle Left
• Number of pins: 2
• Braking/Drive Dynamics: for vehicles with ABS
• Connector Shape: oval
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Overall Length [mm]: 66
• Length [mm]: 48
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 32165
• Weight [kg]: 0.01
• Manufacturer: A.B.S.

Manufacturer: BOSCH

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: grey
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• can be programmed:
• Colour: silver
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH UK£ADY HAMULCOWE
• Name: BS F026C00466

• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Rubber
• Manufacturer: BOSCH
• Name: BS F026C00469

• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00468

• can be programmed:
• Colour: Titanium
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00467
• Lisainfo: F026C00467 BOSCH
• Additional information: F026C00467 BOSCH

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: Titanium
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.01
• Manufacturer: FEBI-UKLAD HAMULCOWY

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: silver
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF
• Additional information: UVS4050
• Lisainfo: UVS4050

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 134375
• Length [mm]: 79
• Sensor Type: Active sensor
• Manufacturer: TRW

• Fitting Position: Rear Axle
• Length [mm]: 79
• Sensor Type: Active sensor
• Manufacturer: TRW

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Surface: primed
• Number of pins: 3
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.01
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Fitting Position: Fuel Line
• Supplementary Article/Info 2: Low Pressure Side
• Manufacturer: METZGER

Installation Information: Note the installation instructions of the original manufacturer during assembly.

• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without cable
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Front Axle
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Manufacturer: BOSCH

• Engine Code: B 420 T
• Fitting Position: Lower, after catalytic converter
• Required quantity: 1
• Equipment Code: GH0C/GH0E/GH13
• Cable Length [mm]: 800
• Conductor Number: 4
• Available as universal article as well, see article no.: 10.8240
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: B 420 T
• Fitting Position: Lower, after catalytic converter
• Required quantity: 1
• Equipment Code: GH0B
• Cable Length [mm]: 500
• Conductor Number: 4
• Available as universal article as well, see article no.: 10.8240
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Fitting Position: Front Axle
• Required quantity: 2
• Suspension: for vehicles without increased ground clearance
• Supplementary Article/Info 2: without cable
• MAPP code available:
• Manufacturer: ATE

• Vehicle Identification Number (VIN) to: 134375
• Required quantity: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: METZGER

• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH